ADDN/ALTN TO BLDGS INCL REPAIR OF JCOs AND ORs MD ACCN UNDER GE WEST MATHURA

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F in repairs125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, 150mm long hinges stainless steel lock strike plate etc complete all as specified and fixed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs,150mm long hinges stainless stee lock strike plate etc complete all as specified and fixed

S&F 35mm thick membrane (0.3mm) door as per IS 2202 with both side design filled with solid particle board design and sample as approved by GE.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed

S&F Galvanised stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.42mm to 2mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 18mm thick prelaminated particle board exterior grade,prelam one side with decorative choice lamination , and other side white laminated complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter 28 to 30mm thick with particle board core but 5mm thick moulded colour PVC sheet on front face and 5mm thick plain PVC sheet on back sides complete all as specified and directed.

S&F Factory made solid PVC fully glazed/wire gauge (single piece both side) PVC prelam door shutter 33-35mm thick (style) consisting of frame made out of mild steel tubes of size 19x19mm (19 gauge) in style.Single piece plain coloured PVC sheet 5mm thick to be used to cover styles and rails. PVC sheet strip of 20mm width stuck inside width solvent cement for stiles and plain colour PVC sheet for top rail.Pannel will wire gauge and tighten firmly and fitted as manufacturere instructions including stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire and average width of aperature 1.4mm to 2mm and aluminium XPM in rhombus shape, in one piece from top rail to bottom rail as specified and directed. Note: All screw shall be self tapping chromium plated.

M&L for 200mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F for 125mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F Steel for factory made window/ventilator steel rolled framed section made of galvanized steel, box type hollow P sec incl grill made of 10mm Sq MS bars welded to 12mm x 6mm, MS flat @ 150mm c/c. Grill shall be welded to window frame. The complete unit ref TD/2013/01 sheet 1/3 to 3/3 shall be a shop coat of zink chromate primer including the following :- (a) Fly proof shutter shall provided with stainless steel 32mm gauge fly mesh of 304 Gde FE with 144 holes per square mesh. Glazed shutter and fixed glass portion shall be provided with glass of 4mm thick float glass. (b) Window frame shall be fixed to brick wall with by cutting holes and made good dismantled portion in PCC (1:2:4) type B1 four Nos hold fast block for each window/ ventilator (i) Hold fast 150mm long of 20x3mm MS flat made to shape 4 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100mm long - 1 Nos per leaf. (iii) Mild stell tower bolt 150mm long - 02 Nos per leaf. (iv) Z section 20mm x 25mm, 100mm long stopper - 1 Nos per leaf, (v) Cleat 55mm long of hollow square 15 x 20 x 63mm welded to hinges size 75 x 12 mm - 02 NOs per leaf. Note : During fixing of window, surface shall be make good in plumb with existing finishes like cement plaster complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed block or filling of chowkats incl necessary form work complete all as specified and directed

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including taking out old broken glass pane complete all as specified and directed .

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane including taking out old broken glass pane complete all as specified and directed including hacking out old broken glass pane .

M&L for 100mm stainless steel Butt hinges, medium weight, cold rolled stainless steel steel, stove enameled black complete all as specified and directed.

M&L for 150 mm stainless steel steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 300 mm stainless steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 125mm Mstainless steel steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 100mm long hasps and staple aluminium anodised complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F tubular towel rail aluminium Anodised 20mm dia 600mm long between flanges complete all as specified and directed.

S&F Harrison rails, 25mm dia stainless steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided

M&Lfor Non skid Ceramic coloured joint free tiles 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.16 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Ditto as per item above but on vertical surfaces for skirting etc over and incl 10mm thick rendering in cm 1:3 complete all as specified and directed.

M&Lfor Non skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Coloured Glazed ceramic tiles in vertical surface 600x300x8 to 9mm including dark border/high lighter be provided (as approved by GE) thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L 15 to 16mm thick Granite (of any type work in single piece) work (table rubbed and polished) for Shelves (veneering to wall) incl 12mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L PCC 1:4:8 thick Type D-2 (40 mm agg) Cement concrete in sub base foundations, filling and mass concrete complete all as specified and directed

M&L Pre polished designer Chequered tiles (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm screed bedding in cement mortar (1:4) complete all as specified

M&L pre polished Machine cut kota stone slab flooring 18-20mm thick in single piece in steps & landing portion in staircase over 20 mm thick screed bed in CM 1:3 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 18-20mm thick ( One piece) in riser of steps, skirting, dado and pillar laid over 15mm thick backing coat in CM 1:4 cement screed base laid and jointed complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4, type B-1 (20mm graded agg) as in lintle chhajja supported on wall ,and other similar work complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 5 cm but n.exc 10cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&LRendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even using liquid WPC. Complete as specified and directed.(liquid WPC Shall be measured saparetly)

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and directed.

M&L Rendering 5mm thick on concrete surfaces in ceiling in cement mortar 1:4 finished fair and even complete all as specified and directed.

M&L for 50mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate finished cement concrete surface even and fair finish without using extra cement as in plinth protection including forming & filling of joint complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work complete all as specified and directed.

M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate finished cement concrete surface even and smooth without using extra cement as in floor complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Warnout of existing treatment from sunken portion of WC /Bath /Kitchen / Passage including taking downfloor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk. (Taking down of plumbing & sanitary fitting & fixture shall be measured under relevant items) complete all as specified and directed.

M&L for Cutting holes into or through brick walls nexc 150 cm area built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed

M&L for Providing, cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in coping, coving, roof padding, padding in sunken slab, as directing mixed with liquid water proofing compound (liquid WPC shall be measured under item no. 57) complete all as specified and directed.

M&L for Cement concrete 1:7:12 type F2 using 40mm graded stone aggregate as in sunken part of slab complete all as specified and directed.

Supply only Liquid water proofing compound of approved make: @ 200ml per bag of cement complete all as specified and directed.

Removing/taking down of old water proofing treatment from roof/concrete surface removal to distance exc 250m and nexc 500m from the site & cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and directed.

M&L for applying protective coating with bituminous based aluminium paint @ 0.2Kg per Sqm in two coats complete all as specified and directed.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof:- (a) Cleaning plastered roof surfaces and applying a coat of Oxidised bitumen based solvented primer @0.3 Kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric waterproofing membrance 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with LPG tocrch with lap of 100mm and the overlap shall be sealed by flame complete all as per manufacture instructions and complete all as specified and directed.

M &L Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished incl 20 mm screed bedding layer in CM 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections , including cleaning for re-fixing , 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , including cleaning for re-fixing , 20 mm bore complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) pipes of pressure rating 6kg/persqcm socketed, excluding fittings in any length with rubber ring joints, laid in trenches or floor wall complete all as specified and directed.

S&F 75mm PVC (SWR) pipes of pressure rating 6kg/persqcm single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius with oval access door complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with oval access door complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for bib taps cast copper alloy with screwed down for iron pipe or brass ferrule and fixed fancy type chromium plated 15 mm bore fixed in repair complete all as specified and directed.

S&F for stop cock angle type cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe (chromium plated) 15mm bore fixed in repair complete all as specified and directed.

S&F for 20mm bore gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size of 410mm x 330mm x 160mm complete all as specified and directed.

S&F for vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket fixed in repair complete all as specified and directed.

S&F Shower rose of 100mm dia (square/circular) cast copper alloy chromium plated with swivel arm of dia 15mm and 195mm long complete all as specified and directed

M&L PVC connection best quality with PTMT nuts 450mm long complete all as specified and directed.

Supply only for pillar tap 15mm bore cast copper alloy with capstan heads, chromium plated screwed down high pressure fancy type long screwed shank and fly nuts for iron pipe complete all as specified and directed.

S&F Rotational moulded polythelene water tanks white colour triple layers (cylindrical vertical with closed top) hoisted and fixed in position for 750 ltr. Storage capacity complete all as specified and directed.

S&F Stack clamps made out of 50mm x 5mm flat irons and 10mm dia round iron bar 10cm long for 110mm bore pipe incl. bolts and nuts and securing edge of stays to wall or roof complete all as specified and directed

-ditto- all as per item No. above but 75mm complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F 32mm Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 40 mm Waste fittings, brass, chromium plated for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S & F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed to WHB, sink complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facing where required & pointing in CM 1:3 for conc water tubing and like not exc 10CM girth in brick wall etc complete all as specified and directed.

M&L Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying a coat of pink primer and two coats of synthetic enamel paint complete all as specified and directed.

M&L for applying two coat of synthetic enamelled paint over a coat of red oxide primer of any girth including preparation of new steel surfaces complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of exterior weather coat over a coat of primer and putty to achieve smooth finish on walls with mechanical applicator and primer on walls complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed.

M&L for preparation of old painted surfaces of wall and applying one coat of exterior emulsion all as specified and directed.

M&L for complete removal of existing treatment from old decorated surfaces of walls and applying two coats of cement base paint over a coat of primer and putty to achieve smooth finish complete all as specified and directed.

M&L two coat of oil bound distemper on walls over a coat of primer and putty to achieve smooth finish including preparation of new plaster surface with mechanical applicator complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated surfaces of walls and applying two coats of distemper oil emulsion complete over a coat of primer and putty to achieve smooth finish on walls all as specified and directed.

M&L three coat of white wash on ceiling including preparation of new plaster surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and aplying two coats of white wash complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in in surface channel and drains complete all as specified and directed.

M&L for two coat Elastomeric Pidilite Raincoat Paint without adding waterover the exposed surface upto plinth level and exposed surface of cupboard wall extra of cupboard wall etc. complete all as specified and directed.

M&L for 25mm thick sand cushioning for laying of interlocking paver block complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 as in levelling course complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint of any girth on old steel surface complete all as specified.

Taking down surface/ conceled aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces walls, floors etc complete all as specified and directed.

Material and labour for point wiring in concealed conduit with 1.5 sqmm PVC insulated,unsheathed FRLS-H multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, sockets, fan regulators etc incl 1.5 Sqmm FRLS-H multistrand copper conductor cable as continuous earth wire complete for the following:- (a) One light point controlled by one switch

(b) One fan/exhaust point controlled by one switch

(c) One light point controlled by two 2 way switches

(d)One bell point controlled by one bell push.

(e) One 3 pin socket outlet 5amps point controlled by one switch on the same board with other switches

(f) One 3 pin socket outlet 5amps point controlled by one switch on independent board

Material and labour for point wiring in concealed conduit with 2.5 sqmm PVC insulated,unsheathed FRLS-H multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc incl 2.5 Sqmm FRLS-H multistrand copper conductor cable as continuous earth wire complete for one socket 16Amp point controlled by one switch on independent board complete all as specified and directed.

Material and labour for point wiring in concealed conduit with 4.0 sqmm PVC insulated,unsheathed FRLS-H multistrand copper conductor cable 1100 votls grade drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc incl 4.0 Sqmm FRLS-H multistrand copper conductor cable as continuous earth wire complete for power metal socket controlled by MCB on independent board complete all as specified and directed.

Supply and fix switch flush type polycorbonate body, single pole, one way 6 amp complete all as specified and directed.

Supply and fix switch flush type polycorbonate body, single pole, two way 6 amp complete all as specified and directed.

Supply and fix bell push, flush type, 6 Amp 240 volt polycorbonate body complete all as specified and directed.

Supply and fix buzzer AC 240 volts, single polecomplete all as specified and directed.

Supply and fix socket outlet 3 pin 5/6 Amps flush type polycorbonate body complete all as specified and directed.

Supply and fix switch flush type single pole, one way 16 amp polycorbonate body complete all as specified and directed.

Supply and fix socket outlet 2 in 1 3 pin 5/15 Amps polycorbonate body complete all as specified and directed.

Supply and fix hum free electronic 5 step fan regulator 120/280 Volts of 100 watt capacity, socket type including connecting up complete all as specified and directed.

Supply and fix Angle/ battan holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

Supply and fix ceiling rose 63 x30mm three terminal,polycorbonate body complete all as specified and directed.

Supply and fix wall mounted LED batten fitting, 20W LED 6000K With LED light 1x20 watt, extruded Aluminium housing provided for efficient heat dissipation and integrated electronic driver complete including copper cable 23/.0076 Sq mm for electric connection for fitting from ceiling rose complete all as specified and directed.

Supply and fix LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp complete all as specified and directed.

Supply and fixing indirect up-down light fitting for mirror and as wall light application ivory colour 9 watts LED 6000K including connecting up from application ivory colour 9 watts LED 6000K including connecting up from ceiling rose/connector block fitting connector complete all as specified and directed.

Supply and fix Security Light of 30 watts of ENDURA CITYLITE PLATINUM new generation energy saving & environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV Built -in-Surge Protection Device including suitable pipe, clamps, nut and bolts for mounting the light complete all as specified and directed .

Supply and fix LED bulk Head 10W HEXA environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs with all connected accessories complete all as specified and directed.

Material and labour for submain wiring with PVC insulated FRLS-H multistranded copper conductor cable of size 2x6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire complete all as specified and directed.

M&L for cutting chases for submain wiring, pinninig in. making good to facings where required and pointing in cement mortar 1:3 to edges or ends of landings, steps, cills, sunshades, shelves, lintels etc. for concealed conduit wiring and making good, match with existing surface by applying necessory white/color wash, cutting not exc 10 cm girth all as specified and as directed by Engr- in -Charge

M&L for TPN DB 4 way double door 415 volts including fixing of blank plates, all necessory connections complete all as specified and directed.

M&L for SPN DB 8 way double door 240 volts including fixing of blank plates, all necessory connections complete all as specified and directed.

M&L for MCB TPN 415 volts, 63 Amps 10KA complete all as specified and directed.

M&L for MCB SPN 240 volts, 40 Amps, 10KA complete all as specified and directed.

M&L for MCB DP 240 volts, 40 Amps, 10KA complete all as specified and directed.

M&L for MCB SP 240 volts,5-32 Amps 10KA complete all as specified and directed.

M&L for making of hole in brick wall including removal of dismantled materials, making good disturbed surface, platering, making holes fixigng bolts suitable for fixing 12" exhaust fan frame complete all as specified and directed.

Supply and fixing of sheet metal enclusres with socket plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 A, 240V complete all as specified and directed.

Supply, installing, testing & commissioning, storage water heater (geyser), 25 litre capacity , standing loss less than 0.562 Kwh per day for 45 degree Celsius difference of temperature as per IS 2082 (five star rated as per BEE), rehating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 4 years on heating element and 2 years on other spares parts comprising following fittings (a) glass coated incoloy element (b) capillary type thermostat (c) digital dispaly unit (d) thermal cutout (e) multifunction valve (f) earth leakage circuit breaker (g) magnesium anode rod cathodic protection (h) flexible cable of suitable length with 3-pin plug of 16 A capacity (j)fusible plug fitted on the crown of water heater with operating temperature between 100 degree celsius to 110 degree celsius including fixing by grouting and fastener complete.

M&L for Cutting existing tubing and taking up for tapping/termination of pipe line, screwing existng steel tubing of size 15mm dia complete all as specified and directed.

M&L for laying on walls, floors and roof of Pipes galvanized 15 mm dia, Medium grade, including fittings complete all as specified and directed.

Supply and fix bib cock 15mm dia cast copper alloy fancy type with crutch of butterfly handle screwed down for iron pipe complete all as specified and directed.

Taking down of ceiling fan 1200/1400 mm of any make & capacity from any height and removing its blades and refixing the same including material and labour for rewinding, with super enamelled copper conductor of suitable size, meet to original specification & speed including varnishing, heating etc including taking out old copper wire and painting of ceiling fans (motor and blades etc) of existing colour or approved by Engr-in-Charge with super enamelled paint one coat complete all as specified and directed .

Taking down of ceiling fan 1200/1400 mm of any make & capacity from any height and removing its blades and refixing the same including material and labour for overhauling of fan motor of any size and removing unserviceable grease, bearings, bushes, split pin, nuts and bolts and cleaning with petrol/ kerosene applying new grease and reassembling complete including replacement of wornout spares with new like split pin, nut & bolts and painting of ceiling fans (motor and blades etc) of existing colour or approved by Engr-in-Charge with super enamelled paint one coat complete all as specified and directed.

Supply and fixing exhaust fans 300 mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 1850 CMH suitable for SP, 230/250V, 50 Hz AC supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan all as specified and directed. Make : Havells/CG/Bajaj

Supply and fixing exhaust fans 230 mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 860 CMH suitable for SP, 230/250V, 50 Hz AC supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed. Make : Havells/CG/Bajaj

M & L Earthing complete with galvanised steel earth plate electrode 600 x600 x 6 mm thick, buried directly in ground (earth pit not leass than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elecrical plate No 3 of MES SSR Part I connected to main DB or main control board all as specified and testing on completion including provision of earth wire portected by galvanised iron 15 mm bore light grade pipe with all fittings from the earth electrode fixed along pole with and including 25 x 6 mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from Top of the earth electrode to bottom of the earth pit and earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle with 10mm dia, charcoal/salt, funnel, CI frame etc complete all as specified and directed

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 4 core size complete all as specified and directed. Make - Havells/Plaza/Finolex /polycab. Note : Earth work and other connected work shall be measured & paid sperately.

Excavation in trenches and not exceeding 1.5m wide and not exc 1.5m in depth in soft/loose soil and getting out all as specified.

Returing & filling of soil in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M & L Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete as specified and directed. Note : for payment purpose punned thickness shall be measured

M&L Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

Sham Sunder Bansal

m/s meetu enterprises

M/s Singh Engineering Corporation

imran construction company