WORK OF REPLACEMENT OF DAMAGED WIRE AND INSTALLATION OF POLE AS DESCRIBED IN TENDER DOCUMENTS

Amount

Carriage of the following material from Store Centre, Majhola/JE’s Store to site of work with loading & unloading at both ends (distance about 35 km.)

(a) ST pole 11 meter/PCC Poles 8.50 meter long.

(b) ACSR Weasel conductor.

(c) 11/0.4 KV 100 KVA transformer.

(d) Line material such as Cross-Arm, Pin Insulators, Disc Insulators and G.I. wire earth rod, top channel, stay rod, 11 kv TPMO etc as per estimate.

FOR 11 KV LINE, Double pole structure with 11 Mtr long Pole:- Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support (pole) Erection of support (pole) complete work by providing stone, sand cement etc, fixing of D.P. Clamps and all other accessories .The work includes fabrication work and fixing of cross bracing sets ,cutting holes complete work as per RESPO Norms.

FOR 11 KV LINE, Single support with 8.5 mtr long PCC Pole:- Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support (pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing stone pad, cross arm holding clamps, f-bracket and Nuts & Bolts as per RESPO Norms.

Grouting of Stay Rods (20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:6(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, Nuts&Bolts etc.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 6 SWG tightening with nuts and bolts.

Grouting of PCC poles 8.50 Meter long single line support:- Grouting of support in CC 1:4:6 (cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level as per RESPO Norms.

Laying, sagging, stringing and binding of ACSR Weasel Conductor with other accessories on poles as per RESPO Norms.

Laying, sagging, straightening 11 kv 3x120 sqmm XLPE cable with other accessories on poles as per RESPO Norms.

Filling & fixing of cable jointing kit suitable for 3x120 sq.mm XLPE cable complete work as per RESPO norms.

Providing & Fixing of Danger board on pole as per norms.

Construction of Plinth of size 2x2 Mtr. suitable for STP section pole by providing sand, cement, brick ballast etc as per norms.

Dismounting & Carriage of 11/.04 KV 63 KVA T/F from site of work to Store Centre, Majhola/JE’s Store with loading & unloading at both ends (distance about 35 km.)

Mounting & fixing of 100 KVA on double pole including making proper connections as per RESPO Norms.

Fixing of 11kv TPMO on double pole including making connection as per norms.

Carriage of G.I. etc scrap from site of work to Store Centre, Majhola with loading & unloading at both ends (distance about 35 km.)

fraink international