REPAIR MAINT OF EM INSTALLATION, PC ATT AND CERTAIN BLDGS IN TECH AREA OF AF STN GWALIOR

Amount

Demollition of cement concrete ( unreinforced) including floor tile ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed .

M&L for 75 mm thick cement concrete 1:3:6 Type D2 ( using 40mm graded Stone aggregate) as in subbase, floor and pavings complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floors , hard standng kerbs, haunching, rounded or chamfered on edges, coping , floor finishes etc incl necessary form work complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth with using extra cement complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in flooring and finish the concrete surface even and smooth without using extra cement complete all as specified and directedc.

M&L for non skid coloured ceramic tiles 7-8mm thick (Square/Rectangular), area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. complete all as specified and directed.

M&L for glazed ceramic Coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surface in cement moratar 1:4 and including dismantling of wall tiles complete all as specified and directed.

M&L for 300x300x10 mm thick footpath designer tiles any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors including 15 mm thick screed bed with bedding layer in CM (1:6) complete all as specified and directed.

M&L for 8 to 10mm thick double charged vitrified ceramic coloured tiles (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over 15mm th screed bed in CM 1:6 complete all as specified and directed.

All as per above here-in-before but as in skirting/dado but 10mm thick cement plaster1:4 as backing coat and including dismantling of tiles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, & Frame, ladders, framed balusters, walk ways, railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F MS tubular pipes as in vertical post , rafter & purlins as in sheds/canopy cut to reqd shape , welding drilling and including bending as necessary , gusset plates, riveting , etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismentling of existing Plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Ridge, valley/ gutter fixed with self tapping screws including Dismentling of existing Plain or corrugated steel /AC Sheet complete all as specified and directed.

Demolition of wall and ceiling boards (fibre ,pulp, insulation etc ) or insullation boards /slabs/ blankets any thickness including wall paneling cover fillets or aluminium grid frame work complete all as specified and directed.

S&F 12mm thick perforated Gypsum Board as in wall panneling fixed with screw and sealed the joints with necessary tape and putty including Gl frame work for seamless wall panneling comprising of Gl channnel frame work 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm with and including having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic) decorative finish including E-grid suspended false ceiling grid system 600x600mm with main runner 33x24x0.6mm, cross tee 25x24x0.6mm and wall angle 19x22x0.4mm ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fasteners to RCC Roof or from purlin with butterfly clips hold down clips etc from soffit at approx 1.20mtr centre to centre including dismetling old unserviceable false ceiling with grid any discription complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) of any description n.exc 1.5 Sqm each complete all as specified & directed

Taking down chowkats with shutters (without taking off shutters from the frames) of any description exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified & directed

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each complete and refixing in its position incl necessary Resecuring & easing all as specified & directed.

S&F 35mm thick flush shuttter, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed.

M&L for preparing of new wood surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and dircted

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), With Wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed .

S&F 150mm long aluminium barrel tower bolts, of extruded section complete all as specified and directed .

S&F 300 mm long 16mm dia aluminium alloy, anodised, sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet, fabricated type complete all as specified & directed

S&F in repairs 3mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors including prepration of floor by cleaning of old adhesieve and filling the cracks/depressions with POP/white cement complete all as specified and directed.

S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, complete all as specified and directed.

S&F Powder coated aluminium door shutters with extruded built up standard tubular sections using aluminium sec not less than 2.00 mm thick, (shutter with styles 85mmX44.45mm, top rails 83.5mm X 44.45mm , intermediate rail 83.5mmx44.45mm, bottom rail 114.3mmx44.5mm) jointed with jointing cleats, nut bolts and screws including rubber neoprene gasket and aluminium beading for fixing glass & ACP Sheet complete, all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium sliding windows shutters with extruded built up standard tubular sections (using aluminium sec not less than 2mm thick), fixing to frame includig rubber neoprene gasket and aluminium U channel, 02 Nos sliding rollers at bottom, locking arrangement to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F 5mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.

S&F 4mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.

S&F 4mm thick ACP (Aluminium composite pannel) coloured sheet with 0.25 mm thick of aluminium coil, sandwitch pannel as in alumiium doors/wall claddings with sealent and necessary hidden screws complete all as specified and directed.

S&F in repairs 4mm thick ACP (Aluminium composite pannel) coloured sheet with 0.25 mm thick of aluminium coil, sandwitch pannel as in alumiium doors/wall claddings with sealent and necessary hidden screws complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with glazing putty or galvanized wire staples including to wooden/steet windowa/vents with beading etc complete all as directed.

S&F in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty in squre n exc 0.50 Sqm in each pane at any height complete complete all as specified and directed.

S&F in repair, door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed.

S&F in repair double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including hinges and double leaf shutter complete all as specified and directed.

S&F in repair 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), P- Type/ S-Type any colour (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F in repairs PVC Seat cover for water closet pan (pedestal pattern), matching colour including fixing bolts. Make: Hinware, parryware & Cera etc

S&F in repair Vitreous China urinals half stall flat back white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm CP waste coupling with PVC waste pipe & Grating complete all as specfied and directed.

S & F in repair vitreous china wash basin, white, flat back size 550 X 450mm including 32mm Brass CP waste Coupling, PVC Waste pipe and Grating complete all as specified and directed.

S&F 15mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed

S&F 20mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed

S&F in repairs 20mm bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe

M&L for Cutting chases for concealed water tubing or concealed conduit wiring, etc. making good to facings where required and pointing in cement mortar 1:3 not exc 10 cm girth complete all as specified and directed.

S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.

S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.

S&F in repair 110mm PVC(SWR) bends complete all as specfied and directed.

S&F in repair 110mm PVC(SWR) junction single, (Single T) eual or unequal complete all specfied and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repair chromium plated fency type bib taps long body cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.

S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Brass CP, fancy type 15mm bore Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe.

S&F in repairs Brass CP, fancy type 15mm bore Cocealled stop cock with crutch or butterfly handle, screwed both ends for iron pipe.

S&F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) and Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms)

Demolition of stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid in any type of mortor complete all as specified and directed.

M&L for 15-18 mm thick Granite (of any type) work (table rubbed and polished) in floors, steps pillar, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm th screed bed in CM 1:6 complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar laid ove and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete.

M&L for 60mm thick machine pressed precast coloured concrete interlocking paver block, Glossy finish any shape and size and colour confirming to IS 15658-2006, M-35 Grade with grey cement and pigment and including laid over 25mm thick compacted sand/stone dust complete all as specified and directed. Make: ISI Marked as Approved by GE.

M&L for sand/stone dust filling under floor watering and levelling to receive paver blocks.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) incl demolition of brick work of any description and in any position built in cement mortar including disposal of rubbish complete all as specified and directed.

M&L for 15mm thick rendering fare face of brick in CM 1:4 incl finished even and smooth without using extra cement finished complete all as specified and directed.

M&L for 15mm thick rendering other than fare face of brick/concrete surfaces in CM 1:6 finished includuig taking down old cement plaster on brick surface incl raking out joints hacking for key, scrubbing down with water etc and prepared to the plaster complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coat of oil bound distemper over a coat putty & primer white or tinted as approved all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coat of exterior emultion paint (weather coat) over a coat of primer white or tinted as approved all as specified and directed.

Dismantling of old PVC water tanks with float valve and S&F 500 lit capacity rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gm s) complete all as specified and directed.

Dismantling of old PVC water tanks with float valve and S&F 1000 lit capacity rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gm s) complete all as specified and directed.

Demolition of cement concrete in roofs, chajjas and similar suspended work including existing roof treatment (screed plaster & tarfelt of any description) n.exc 0.15mm thick and removing the demolished material out of MoD land complete all as specified and directed.

Removal of existing roof treatment (brick tiles, screed plaster, & tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.

M & L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching,kerbs and levelling course etc over roof surface complete all as specified and as directed

M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

Supply only liquid water proofing compound complete all as specified and directed.

Supply and application of 5 layer SHR waterproofing Coating System as per manufacturer application procedure on leaking concrete surface by through surface preparation with high pressure water jet min 125 bars, opening the cracks, followed by one absorption coat of Nano-tech enhanced elastomeric water proofing (NEEWP) emulsion havig UV resistance and min 50% solids, filling and sealing the cracks, then over coating with 2 coats of NEEWP + cement mixtures as water proofing coat having + 450% elongation. The surface is then to be tested for water tightness with ponding test for min 2 days and then top coated with 2 coats of SHR coating oure acrylic based, UV resistant, non yellowing, bio-organism resistant (anti fungal, anti bacterial) conforming to BIS STD IS-17218:2019 with pull off adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, mat, surface coverage 3.25 Sqm/Ltr/2 coats, DFT 100-120 microns using brush, roller, airless spray guns as applicable. The product should be tested at NABL approved Lab andf application is to be done by company approved applicator only".

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or PCC 1:2:4 complete all as specified and directed.

Disconnecting/Dismenling existing PVC water tanks, setting aside (or lowering if required) and reconnecting and re-fixing in position including Cleaning repairing, etc) any size with plumbing work complete all as specified and directed.

M&L for repairing of damaged RCC Chajja, fascia, fins, roof projection, ceiling and balcony railing etc at any height by rendering 15 to 25mm thick in one or two layers as per site requirement in CM 1:3 incl hacking out old broken/damaged concrete portion, cleaning of old reinforcement etc and applying neat cemtnt slurry @ 3 Kg/Sqm complete all as specified and directed. (Note : Rate for all scaffolding required for repairing work shall be deemed included in this rate)

S&F 1.40mm dia GI netting (20 mm mesh size) over/around exposed reinforcement of chajja, facia, ceiling & wall etc and securing with screws , washers/ nails complete all as specified and directed by Eng-in charge.

Demollition of reinforced cement concrete ( reinforced) of any description and in any position not otherwise specifically provided and dispose off the demolished material out of defence land complete all as specifeid and directed.

M&L for RCC nominal mix 1:2:4 type B1 (using 20 mm crushed stone aggt) as in shelves, slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the likec complete all as specified and directed.

Formwork to soffits of suspended shelves, slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..

M&L for 10mm thick rendering fare face of concrete surface as in ceiling in CM 1:4 finished even and smooth without using extra cement finished complete all as specified and directed.

M&L for preparation of newly plaster ceiling surface and applying two coats of white wash all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the internal/ external wall anf floor junctions below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes with coloured CM 1:2 to match with the existing floor complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash complete all as specified and directed.

All as per item No 98 above but on ceiling surfaces.

M&L for Preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions and applying one coat of distemper oil emulsion with roller white or tinted as approved complete all as specified and directed.

M&L for prepration of old decorated external surfaces of wall applying one coats weather coat exterior emulsion with roller, as approved including filling the cracks and depressions with putty/ POP to make the surface even and smooth matching to the adjacent wall surfaces complete all as specified and directed.

M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Cleaning of vegetation, grass vegetation, saplings,undergrowth, roots, dead bird/beads, etc from buildings/roofs /parapets/ lintels, etc at any height/storey; sweeping the surface clean by brooming down or steel wire brushing to remove smoke soot, etc and removing rubbish upto a distance of 100 metres outside the periphery of the area complete all as specified and as directed.

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.

M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, trminal boxes closed recossed type. PVC Plastic board including ceiling rose all as required as specified and directed

One light/ Fan point controlled by one way switch.

One 5 Amps switch socket combination on independent board.

One 5 Amps socket on same board witch switches

All as per item No-106 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F Modular switch 1 way 6A, 1 module single pole 230 V.

S&F Modular type switch socket out let 3 pin 6 Amps flush type 230 Volts multipurpose,

All as per item here-in-before above but 6 Amps and 16 Amps multipurpose( 3 Pin 16 Amps and one pin 6 Amps controlled by one switch)

S&F fan regulator Electronic Step type (min 5 steps) 2module, 100W ISI marked by removing old u/s resistance type fan regulator including necessary connection in existing laminated switch board by making necessary holes etc., complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed.

S&F lamp holder insulated body with back plate for battern fittings complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm FRLS of voltage rating 1100 Volts drawn in and including surface in PVC casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Supply and fix in replacement sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm FRLS of voltage rating 1100 Volts drawn in and including surface in PVC casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Supply and fix in replacement sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 2.5 Sqmm FRLS of voltage rating 1100 Volts drawn in and including surface in PVC casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Supply, fixing, in replacement, connecting & testing of sheet metal enclosures double door (IP-42 Protection), single pole and neutral, 12 way DBs for using MCBs / MCB isolators with aluminium bus bars suitable for 200 Amps rating, complete all as specified and directed..

All as per item here-in-before but distribution board single pole and neutral, 8 way . complete all as specified and directed.

All as per item here-in-before but distribution board single pole and neutral, 4 way .complete all as specified and directed.

S&F in replacement of 10 Watt LED bollard light one meter long with Opel acrylic diffuser and IP-65 protection including necessary PCC base work complete all as specified and directed by Engineer-in-Charge.

Supply& Fixing in replacement of LED Batten fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing in replacement of decorative surface mounting 36 watt LED full out put luminaries which provides soft light glare free symmetrical illumination suitable for Armstrong/Grid ceiling, white powder coated sheet steel housing with paralite P5 square parabolic louver block in metallic perforated frame for low glare, aluminium reflector and accessories ,connecting the same to electric source with and including copper conductor 23/0.0076 flexible twisted twin core cable , including all accessories and fixing arrangements for fixing the 2x2 LED light fitting to false ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of LED building security/street light light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.

Disconnecting & taking up or down existing unserviceable / deshaped, aluminum / GI earth strips or taking down conductors of any size and in any position at any location in any height of the building and hangar stacking properly the serviceable strips for re-use in the work including making good the distrurbed surfaces to match with the existing surfaces complete all as specified and directed. Note:- The cost of required quantity of insulators required for refixing of the earth strip is deemed to be included in the quoted rate.

Disconnecting and taking down the all Air termination rod of any type and any size carefully by operning the GI pipe, socket, aluminium gutka and refixing the same at the original position complete all as specified and directed. Note:- The cost of making good to the existing PCC block, if reuired shall be deemed to be included in the quoted rate

M/s. Ravi and brothers (BID ID -3451704)

Mahakal Construction Company (BID ID -3451399)

Sunil Traders (BID ID -3457149)

m/s vikash Engineers (BID ID -3456919)

M/s Yashika Enterprises (BID ID -3451716)