Improvement of Nehru Bali ground including walking and cycle track and development of Lakhi Prasad Goswami open stage at Nagaon under CIDF .

Amount

Internal Road Cycle Track

Excavation in Ordinary Rock using Hydruli Excavatior and Tipper with Disposal upto 1000 m Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with all lift and lead up to 1000 m, trimming bottom and side slopes in accordance with requirements of linees, grade and cross sections. (740x4.2x.4)cum

Clearing and Grubbing Road Land Clearing and Grubbing Road Land including uprooting rank , vegetation, grass bushes, shrubs, sapplines and trees of grith up to 300 mm, removable of stumps of such trees cut erlier and disposal of unservicable materials and staking of servicable materials to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm thickness, ii. in area of light jungle.

Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirment of table (300-2), (including compensation of earth), (a), ( including cost of testing of materials at site and laboratory as direced by the deptt). (740x4.5x15) cum (a) From private land

Construction of granular sub-base by providing close graded material, spreading in unifrom layers with motor grader or prepared surface, mixing by mix in place method with rtavator at OMC and compacting with vibratory roller to achive the desired density, comlete as per cl. 401 (with and initial lead of 5km.) (including cost of testing of materials at site and laboratory as directed by the sepertment.) (740x4.5x.15) (ii) for grading II material

Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading unifrom thickness hand packing, rolling with vibratory roller 8-10 tonnes in stages to proer grade and camber, applying and brooming requisite type of screening/binding materials to fill up the intrestices of coarse aggregate , watering and compacting to the required density (with an initial lead of 5 km). (740x2.7x0.75) © Using Screening Type-B (11.2 mm Agg.)

Providing and applying prime coat with bitumen emulsion on prepared surface of granuler base including clearing of road surface and spraying primer at the rate of specified quantity using mechanical means. ( including cost of testing of materials at site and laboratory as directed by deptt.) Primer @0.6kg per sqm (740x2.7) With bitumen emulsion-CSS-1h

Providing, laying and rolling of open graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregate either using penetration grade bitumen to required line, grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant laying and rolling with a smoth wheeled roller 8-10 tonne capacity to the required level and grade. (including carrige upto initial lead of 5.0 km from quarry and carriage of mixed materials upto 10.0km initial lead from mixing plant) (including cost of testing of materials at site and laboratory as directed by the septt.) Without anti stripping agent Mechanical method using Penetration grade Bitumen (60/70 or VG-30 grade) and HMP of appropriate capacity not less than 75 tonnes/ hour.

Providing and laying seal coat sealing the void in a bituminous surface laid to the specificed levels, grade and cross fall using Type-A Seal coat ( including carriage up to initial lead of 5.0 km from quary) ( including cost of testing of materials at site and laboratory as directed by the deptt.) Without anti stripping agent Type-A (Providing bitumen 60/70 or VG-30 grade.)

Construction of Walk ways along with cycle track

Providing soiling in foundation and under floor with stone /best quality picked jhama sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete (a) Brick on flat soiling

Plain cement concrete works with coarse aggregate of size 13mm to 32mm in foundation bed for footing steps,walls,brigk works etc. as directed and specified including dewatering if necessary,and curing complete (shuttering where necessary shall be measured and paid separtely) (a) In proportion 1cement: sand6 : coarse aggregate by volume

Antiskid tiles: providing Antiskid Tiles of approved quality size,shape not less than 8mm on floor,skiriting over cement morter bed 15mm thick of 1:3 (1 cement:3 coarse sand) approved make fix with Fix-A Tile(Choksey/Sika/Pedelite/Rouf)/white cement complete at all level as specified and direceted) Nitco made (KRATOS)

CONSTRUCTION OF STROM DRAIN

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Plain cement concrete works with coarse aggregate of sizes 13mm to 32 mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 3 sand :6 coarse aggregate by volume

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering belovw supporting floor to celling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footing, bases of columns, pile cap, raft and mass concrete works etc. (b) using 38mm thick plank

Providing soling in foundation and under floor with stone / best quality picked jhama brick,sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in substructure upto plinth level In prop 1:4

CEMENT CONCRETE FLOORING

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area, wearing layer is to be laid in panels including curing etc. complete as directed.

Cement plaster skirting with cement mortar in prop 1:3( 1 cement:3 coarse sand) finished 5.1.10 with a floating coat of neat cement including rounding the juctios with floor (b) 20 mm thick

Providing precast RCC slab in prop 1:2:4 reinforced with 10mm bars @150mm cement both ways tying with 20 gauge annealed wire with necessary shuttering including fixing. (b) 75 mm thick

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with UPVC fittings ( Using UPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) xii) 160mm diameter

Construction of Toilet Block

Earthwork in excavation for foundation trenches of walls etaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling dressing, Watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including Dalling out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering. ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by manufacturer the including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and thc like and other works not less than 100mm thick up to plinth level. b) M20 grade concrete or Prop. 1:1.5:3

(B) In super structure from plinth level up to 1st floor level ii) Columns, pillars, posts, struts, suspended floor, root, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever,, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. b)M20 grade concrete or Prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering strutting and propping etc. high of proping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

Sides of tle beams, grade beams etc. at ar below ground level. (b) Using 25mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shapeike Tee/Letc. having plane vertical face (ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (ii) Using 25mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings,cantelever slabs, chajjas, balconies and the like. (ii) Using 25mm thick plank

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement martar in proportion 1:4. (1 cement:4 sand)

15 mm thick Cement single coat on single or half brick wall for interior plastering up to 1st floor level indluding arises, internal rounded angles, not exceeding 80mm girth and finishing even and smooth including curing complete as directed. b) In cement mortar 1:4

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm size thick (having one flange of 20mm and another flag of 30mm and a web of 27mm) along with flange of perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.l.cleat and steel expansion fasteners. (i) 9.5mm thick

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (iv) 5 mm clear glass

Providing wood work in frame (chowkaths) of doors windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) with sal wood

Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) b) With 1st class local wood (Hollock / Gamari/Sundi/ Bonsum) (i) 40 mm thick with panel inserts of 20mm thickness.

Supplying, fitting and fixing in position reinfarcement bars conforming to relevant I.S. Code for R.C.C. walling including straightening, bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc will be entertained in the measurement as they included in the rate) (Upto 1st floor level) anchor etc. (ii)Super Ductile (SD) TMT reinforcement bars

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 confarming to relevant I.S.code 4923: 1997

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced withflat iran diagonalsm 20mmx5mm size with top and bottom rails of T-iron 40mm x40mm x 6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stopper, handles aplying a priming coat o lead paint.

Providing Antiskid Tiles of approved quality size, shape ot less than 8mm on floor, Skirting over a cement motar bed 15mm thick of 1:3 (1 cement : 3 coarse snad ) approved make fix with fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement compelete at all level as specified and directed. VITRIFIED TILES A) ON FLOOR i) Nitco made a). Imperia Series- Gres Tiles

B) ON WALLS CERAMIC TILES Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A- Tile (Choksey Sika / Pedelite Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). c) Delux range Somany/Orient/Nitco/Asian Make ii) Of size 200mmx400mm and above

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self driling , self tapping screws comlete. (Roof trusses, purlines etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof/ Durakolor/ Wonder Rood or equvalents as directed by the Depertment. (iii) 0.50 mm thick

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self driling , self tapping screws comlete. (Roof trusses, purlines etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof/ Durakolor/ Wonder Rood or equvalents as directed by the Depertment. (iii) 0.50 mm thick

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1) cement: 6 coarse sand) laid and jainted with slurry including rubbing and polishing complete with marble slab of specified quality and shade at all (I) Dungri slab

PLASTER OF PARIS & WALL PUTTY Providing two coats of J.K Putty ( White Cement based putty for concrete/ motar walls and celling both internal and external ) Afte removing all loosely adhering material from the wall surface with the help of emery stone, utty blade or wire brush and moistering the wall with sufficient quantity of clean water as specified and directed by the depertment. (Total Thicknss of two coats is maximum 1.5m)

a) Applying oné coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and 13.2.3 other foreign matter and including preparing the surface even and sand papered smoath.

Wall painting (two coats) with Plastic emulsion paint of Asian paint/ Berger paint/ ICI paint/ J & N paint/ Neralac) on new surface to give an even shade after throughly brushing the surfaces and ather foreign matter and approved brand and manufacture free from mortar droppings sand papered smooth. (a).Plastic Emulsion Paint of approved manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/Nerolac)

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade bythinning 1ltr. Of Paint with 750ml of water to give an even shade after thrughly brooming the ithe surfaces to remove all dirt and remains of loss powdered materials as specified and directed by the depertment.

Applying priming coat over surfaces over 100mm in girth/width after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (a). With ready mixed paint, Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger/ICI paint/ J. & N paint/ Nerolac) to give an even including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grcase, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and man ufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Neralac) to give an even shade including foreign matter. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Supplying, fitting, fixing brass fitting of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects with counter sunk holes for screws indluding necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). a) Sliding door bolts i)300mm x 16

b) Tower bolts i) 300mm x 10mm

c) Door handles iii) 150mm

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing Drain with cement cncrete (1:3:6) 10 cm Thick sides 10cm thick bed over brick flat solding including 15mm thick cement slurry as directed with necessary shttering for side and earth work in excavation of foundation treenches and refilling the side afte completion of work etc. as specified. ii) 300mm wide and average 250mm deep with bed slope 1 in 15 with initial depth of 100mm.

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.

SANITARY & WATER SUPPLY WORKS

DEEP TUBE WELL

Labour for boring hale for inserting tube well pipes through different soil/rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fitting complete as directed by the department ii) Bore hole of 150mm diameter

Supplying, fitting and fixing pipes plain/ bevel ended for causing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehale followed by supplying and packing of pea gravel free from dirt, dust and other foreign materlal in the annular space between the borehole and assembly plpes complete as directed by the Department PVC Pipe (a) Supreme Brand (v) 110 mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. Pipe (a) TATA/SAIL (medium) sockets should be welded to the pipes. (iii)40mm diameter

FILTER Supplying, fitting and fixing of ISI approved PVC filter 3.00 metre long

SANITARY WORKS Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C. Orrisa pattern of size580x440mm b) coloured ii) Hindware make

PVC FLUSHING CISTERN Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make b) coloured iv) Deluxe Duel Flush (Cat No.C8110)

EUROPEAN TYPE WATER CLOSET Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffer, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) B) Hindware make b) coloured (vi) Water closet UNIVERSAL "S (Cat.No.20012) (inclusive of seat cover)

WASH BASIN Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Table Top Basin B) Hindware make (a) white (ii) Corel 520 Dia (Cat. No.10067)

MIRROR Providing fitting and fixing Decorative Mirror complete as directed and specified. (f) Dolfee( Cat. No.-DE-0102)

SOAP TRAY,SOAP DISH,LIQUID SOAP AND LIQUID SOAP CONTAINER Providing, fitting and fixing recessed soap tray / Soap dish complete as directed and specified. Agmeco Make (f) Dolfee( Cat. No.-DE-0102)

TOWEL RAIL,TOWEL RACK & TOWEL RING Providing, fitting and fixing CP towel rail complete as directed and specified (d)Agmeco made

PVC PIPES,BENDS,JUNCTIONS,TEES ETC. Supplying, fitting and fixing PVC pipe of 6kg/cm2 (supreme/Prince) or others ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified a) In exposed surfaces and trenches (ii) 110mm dia

(iv) 75mm dia

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified a) In exposed surfaces and trenches (ii) 110mm dia

(iv) 75mm dia

Supplying fitting and fixing PVC Plain single tee of (Supreme/Prince) or oher ISI approved including joining, fitting and fixing etc as necessary complete at all levels including below G.L as directed and specified a) In exposed surfaces and trenches (iv) 75mm dia

Supplying fiting and fixing PVC Plain single tee with doors of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces and trenches (ii) 110mm dia

MANHOLE COVER Providing fitting and fixing (600x600)mm 90mm thick C.I Man Hole cover and frame of 25kg. Weight complete as directed and specified.

WATER SUPPLY WORK STOP COCK Supplying fitting and fixing chrome plated (C.P) stope-Cock of approved brand of size as mentioned below and directed and specified (G.I & C.P pipe will be measured and paid separately) i) Jaguar (ii) Concealed stope cock witth adjustable wall flange

CPVC PIPE Providing and fixing chlorinated Polyvinyle Chloride(CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe A) Exposed or in trenches i)25mm dia

i)32mm dia

(B) Cancealed pipe with cutting chases & making good the wall i)20mm dia

BIB COCK Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) i) Jaguar (a) Continental/Clarion (ii) 2 way bib cock

PILLAR COCK Supplying and fitting fixing 15mm dia of approved brand as specified and directed Marc Brand ( c) Pillar cock (Oyster series)

WATER TANK Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex/ Polycon/ Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 1000litres (a)Sintex make

Structural steel work in sigle sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. c) In M.S. angles, channels, Tees etc.

URINAL Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with autometic flushing cistern with standerd flush pipe and CP brsass spreader andbrass union, etc. complete including painting of fittin and brackets, cutting and making good the walls & floors wherever required. (B) Hindware Make a) white (i) FB 610 x 410 x 380 (Cat. No.60002)

Single phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 1.5 HP STAGE 5 to 26 with control panel.

SEPTIC TANK/SOAKPIT

EARTHWORK IN EXCAVATION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

SOLINGWORK Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

PLAIN CEMENT CONCRETE WORKS Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 3 sand :6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE WORKS Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) N) b) M20 grade concrete or Prop. 1:1.5:3

MASONARY WORK Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in substructure upto plinth level In prop 1:4

PRECAST RCC SLAB Providing precast RCC slab in prop 1:2:4 reinforced with 10mm bars @150mm cement both ways tying with 20 gauge annealed wire with necessary shuttering including fixing (b) 75 mm thick wall

PLASTERING Cement plaster skirting with cement mortar in prop 1:3( 1 cement:3 coarse sand) finished with a floating coat of neat cement including rounding the juctios with floor (a) 15mm thick

TIMBER SHUTTERING (FORMWORK) Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footing, bases of columns, pile cap, raft and mass concrete works etc. (b) using 25mm thick plank

REINFORCEMENT Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI APPROVED tmt REINFORCEMENT BAR (SRMB/SAI/BISCON/ X TECH)

SOAK PIT AND INSPECTION CHAMBER Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

ELECTRIFICATION

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick /heavy rigid PVC IS: 9537 Part I conduit (Berlia/ AKG Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) Gl/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal Kolor kany.Kom/Havells or equivalent make as approved by the Deptt) etc. complete Short point up to 3.00 metre., length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Socket(extra) Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco/ Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART -IIl rigid PVC conduit (Berlial AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps FIT switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1 5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere Medium point up to 6.00 metre., length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to 1S 694. 1990 with flexible bright annealed electralytic copper conductor for voltage grade p to 1100 volts (Finolex /RR Kabel /Nicco Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), Gl/ MS switch board (1.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick heavy ISI marked IS: 9537 PART- III rigid Long point up to 10.00 metre. Length.

Submain wiring Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt) PVC conduit (Berlia/ AKG/ Precision! Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART Ill rigid PVC conduit wiring system With 2x2.5 sq. mm + earth continuty with 1x1.5 sq. mm. in 20mm. Dia 2mm thick/ heavy rigid PVC IS: 9537 Part- III conduit

With 2x6 sq. mm + earth continuty with 1x4 sq. mm. cable in 25mm. Dia 2mm thick/ heavy rigid PVC IS: 9537 Part- III conduit

Socket(With switch board) Wiring for 5 pin 6 amp Plug with 1.5 sq mm P.V.C insulated single core unsheathed indust cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR kable /Nicco/ Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal/ Kolor kany. kom/Havels or equivalent make as approved by the Deptt.) make earthing the 3rd pin of the socket as reqired on the switch board in surface/ recessed P.V.C conduit wiring system. when fitted on same board of light and fan.

Earthing Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 50 mm dia. 3.00 Metres length corrosion free dual pipe technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Ceiling fan/Exhaust fan Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make)

Fitting and fixing of brackets on the wall in Gl/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories such as Glf MS switch board (ISI marked) with phenolic laminated sheet cover including connection as approved by the Deptt.)as required complete.

MCB/MCBDB Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, Legrand, Hanger make) 12 way SPN double door

Supplying with fitting and fixing single pole 10 C Series 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity C Series (ABB, Schneider MG, legrand, Hanger make) 40A

APDCL Service connection Service connection charge by APDCL Authority, Metering etc.

Renovation of Boundary Wall

a) Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Providing and laying plain/ reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of work (form work and reinforcement will be measured and paid separately) (i) Using Mixer machine (B) In super structure from plinth level upto 1st floor level.(ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing a) without admixture, plasticiser etc. b) M20 grade concrete or prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., 3.1.1.3 Columns, Pillars, Posts & Struts (a) Square, Rectangular, Polygonal in plan or any shape like Tee/ L etc. having plane vertical face (a) Using 38mm thick plank

10mm thick Cement Plaster in single coat on fair side of brick/ concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smmoth including curing complete as directed. B) In cement mortar 1:4

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

c) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on old wall surface (one coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose or softened paint.

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a) with ready mixed " red- lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paintof approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N Paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. a) With ready mixed "red- lead/ red oxide" primer.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate)(Upto 1st floor level) a) From Primary Producer: TATA / SAIL/ Esser Steel/ Jindal Steel/ Shyam steel/ RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar.

Proving, fitting and fixing M.S. grill of required patter for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. Ornamental grill c) Fixed to Brickwork/ P.C.C./ R.C.C.

Wall cladding: MCM A series facing brick (085089, 10 mm thick.)

Field Development Works

Raising low site around the building with approval soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Renovation of Lakhi Prasad Goswami open stage

Providing Ceramic Pave Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with Approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Delux range/ Somany/ Orient/ Nitco/ Qutone Make

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirting, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ white cement slurry mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) c) Delux range Somany/ Orient/ Nitco/ Varmora/ VITA/ Marbito/ Make ii) Of size 1200mmx1600mm and above.

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf) white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above.

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Celling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of celling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9m thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I. cleat and steel expansion fasteners. ii) 12.5mm thick.

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

c) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on old wall surface (one coat) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose or softened paint.

MCMA Series Facing Brick (085089, 10mm thick) (Rate as per Annexure)

Sanitary & Water Supply Works

SANITARY WORKS Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C. Orissapattern) with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required. (Flushing Cistern to be paid separately) indian type W.C. Orissa pattern of size 580mmx440mm a) white ii) Hindware make

PVC FLUSHING CISTERN Supplying, Fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. complete as directed and specified (Pipes will be measured separately) i)parryware make a) white (i)Economy single Flush (Cat No. C8090/C8055)

EUROPEAN TYPE WATER CLOSET Providing fitting and fixing vitreous China pedestal type water closet (European type W.C. pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets required. (Flushing Cistern to be paid separately) B) Hindware make a) white (i) Water closet Green (Cat No. 20079) (inclusive of seat cover)

WASH BASIN Providing vitreous China wash basin with CI/MS brackets, C.P. Brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cock, waste coupling are to be paid separately) BASIN WITHOUT PEDESTAL (B) Parryware Make a) white (ii) standard 630x450 (Cat No. 10001)

MIRROR Providing fitting and fixing Mirror with plastic frame of size 500mmx400mm complete as directed and specified.

SOAP TRAY, SOAP DISH, LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER Providing, fiting and fixing recessed soap tray/ soap dish complete as directed and specified Agmeco Make (f) Dolfee (Cat No.-DE-0102)

TOWEL RAIL, TOWEL RACK & TOWL RING Providing, fitting and fixing CP towel rail complete as directed and specified. (d) Agmeco made

PVC PIPES, BENDS, JUNCTIONS, TEES ETC. Supplying, Fitting and fixing PVC pipes of 6kg/cm2 (Supreme/ Prince) or others ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces and trenches (ii) 110mm dia

(iv) 75mm dia

Supplying, fitting and fixing 87.5 degree PvC bend of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces and trenches (ii) 110mm dia

(iv) 75mm dia

Supplying fitting and fixing PVC Plainsingle tee of (Supreme/ Prince) or other ISI approved including joining, fitting, and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces and trenches (iv) 75mm dia

Supplying, fitting and fixing PVC Plain single tee with doors of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels in including below G.L. as directed and specified. a) In exposed surfaces and trenches (ii) 110mm dia

MANHOLE COVER Providing fitting and fixing (600x600)mm 90mm thick C.I. Man hole cover and frame of 25 kg weight complete as directed and specified.

WATER SUPPLY WORKS STOP COCK Supplying fitting and fixing chrome plated (C.P. stop- cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) i) Jaguar (v) 15mm dia

CPVC PIPES Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe A) Exposed or in trenches i) 20mm dia

ii) 32mm dia

ii) 40mm dia

(B) Concealed pipe with cutting chases & making good the wall i) 20mm dia

BIB COCK Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P. pipes will be measured separately (II) Jaguare make (a) Continental/ Clarion (i) Standard

(ii) 2 way bib cock

PILLAE COCK Supplying, fitting and fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (II) Jaguare make (a) Continental

WATER TANK Supplying and placing cylindrical vertical claused top (PCVC) tank of Sintex/ Polycon/ Patton make over the stagging with manhole cover with locking and clearing arrangement including providing pads of size as required for inlet and outlet pipes. 1500 lt capacity (a)Sintex make

URINAL Providing fitting and fixing vitreous Chine squatting plate urinal with automatic flushing cistern with standard flush pipe and C.P. brass spreader andbrass unions etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. A) Parryware Make (a) White

SOAK PIT AND INSPECTION CHAMBER Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/ Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (size of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

( Internal electrification)

Wiring for light/fan/call bell point with 2x1.5sq.mm P.V.C. insulated single core unsheathed industrial ( Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for for voltage grade up to 110volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/MVor equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta/ Gold medal Kolor kanykom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose (Anchor penta/ Gold medal/ Kolor kany kom/ Havells or equivalent make as approved by the Deptt.) etc. complete Short point up to 3.00 m length

Medium point up to 6.00m length

Long point up to 10.00m length

Socket(extra) Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Mulyistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR kable/ Nicco/ Anchor or equivalent make as approvedby the Deptt.) in surface/ recessed 2mm thick/ heavy rigid ISI marked IS:9537 PART- III rigid PVC conduit (Berlia/ AKG/ Pricision/ Presto Plast/ Polycab / MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps F/T switch (Anchor penta/ Gold medal/ Kolor kany kom/ Havells or equivalent make as approved by the Deptt.) , GI/ MS swith board (ISI mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm cable to third pin of the plug socket etc. as reqired complete, when placed elsewhere. Short point up to 3.00 m length

Long point up to 10.00m length

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. PVC insulted single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolyteic copper conductor for voltage grade up to 1100 volts (Finolex/ RR kabel/ Nicco/ Anchor or equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type swith (Anchor Penta/ Gold Medal/ Kolor kany Kom / Havells or equivalent make as approved by the Deptt.), GI/ MS swith board (ISI mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm dia. 2mm thick/ heavy ISI marked IS:9537 PART- III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the Deptt.) Long point up to 10.00m length

Submain Wiring Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex/ RR kabel / Nicco/ Anchor or equivalent make as approved by the Deptt.) PVC conduit (Berlia/ AGK / Precision/ Presto Plast / Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface / recessed 20mm dia. 2mm thick/ heavy ISI marked IS:9537 PART-III rigid PVC conduit wiring system. With 2 x2.5 sq. mm.+ earth continuity with 1x1.5 sq. mm in 20mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part-III conduit.

With 2x6 sq. mm + earth continuity with 1x4 sq. mm cable in 25mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Prt- III conduit.

Socket(With swith board) Wiring for 5 pin 6 Amps plug with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel / Nicco/ Anchor or equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta / Gold medal / Kolor kany kom/ Havells or equivalent make as approved by the Deptt.) make earthing the 3rd pin of the socket as required on the switch board in surface / Recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Earthing Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earting system with 50mm dia. 3.00 Metres length corrosion free dual pipe technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover PV) including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Ceiling fan/ Exhaust fan Supplying including fitting fixing of folloeing A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. As required complete and as directed by the Department. High speed 225mm sweep (ORIENT make), Trans Air 225mm sweep (Crompton Make), Ventil Air DX 250mm sweep louver type (Havells make)

Fitting and fixing of brackets on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories such as GI/ MS switch board (ISI marked with phenolic laminated sheet cover including connection as approved by the Deptt.) as required complete.

MCB/ MCBDB Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas- bar, Neutral link, Earth bar and rail etc. fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make 12 way SPN double door

Supplying with fitting and fixing single Pole 10 C Series 6 to 32 A

Supplying with fitting DP 10 KA 240/415V 50Hz MCB of the following capacity C Series (ABB, Schneider MG, Legrand, Hager make) 40A

Yoga Platfrom 2 nos. (10M X 6M)

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100mm thick

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(a) Using 38mm thick plank

3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. (a) Using 38mm thick plank

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary(b) In proportion 1:4.

ANTISKID TILES:Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. VITRIFIED : i) Nitco made a). Imperia Series- Gres Tiles

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In cement mortar 1:4

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

c) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on old wall surface (one coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose or softened paint.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

MCMA Series Facing Brick (085089, 10mm thick) (Rate as per Annexure)

Providing external electrification for beautification along the river side

Installation of earth station with 40mm dia and 4.5 mtr. long GI pipe with necessary GI reducing socket 40mmx20mm size locking arrangement with hinged cover plate, funnel, GI nuts, thorough bolts etc.for putting pipe and refitting with necessary enclosure on the top etc. as required complete.

Extra for using salt 5Kg and charcoal 64 Kg. for pipe earth electrode as required.

Supplying and laying with 6 SWG GI earth wire at 0.50 mtr. below ground level or conductor earth electrode including soldering, excavation work and refitting etc.as required complete.

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 Core A2XWY A2XFY 6.00 Sq.mm 3 Core armoured U.G. cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) Core - 3 A2XWY A2XFY 6.00 Sq.mm 3 Core U.G. cable in 32mm dia medium duty G.I. pipe

Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items. 1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no 2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos. 3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set 4. 40 Amp 4 pole ON-OFF poser contactor - 1 No. 5. Surface mounting timer switch - 1 No. 6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos 7. 0-40 Amp electro-mechanical counter display 3 Phase 4 wire electronic hybrid energy meter

Supply with fitting & fixing 60 mm dia 3050 mm height single arm DECORATIVE tubular Pole suitable for mounting pelican luminaries . The pole is made of GI tube ,integral with built in cylindrical GI control box, service door and a circular base plate . The single arm pelican bracket is fabricated with 38 mm dia GI tube and held on to 60 mm tube with spacers . The pole is swaged at the top to accommodate the bracket assembly secured on to the top by means of 2 annular rings with Allen grub screws . The pole and the bracket are coated with epoxy zinc phosphate primer and finished with polyurethane based paint . The control gear tray is pre-cabled with MCB, terminal connection as approved by the Deptt.)for loop in loop out and suitable for 20 W CFL lamp for operation on 240 V, 50 HZ single phase AC Supply . The pole is to be fitted on 1:3:6 PCC pole foundation of size 300 mmx300 mmx1200 mm with grouting nuts & bolts as specified & directed by the deptt .(Metal Coats make).COLOMBIA-PELICAN-1 model or equivalent.

service connection,load security,meter security etc. to be paid to local APDCL authority.

Providing Solar lighting system for construction of cycle track

Supply, installation,testing and commissioning of 15W LED integrated type solar lighting system including PCC foundation, pole etc. complete(Onergy or equivalent make and as per approval of MNRE).

Landscaping & Beautification

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (F) Paine

Flowering Tree (A) Gulmohar / Ashok

Construction of FRP pergola ( Width = 3.6 m, Height of the side posts = 3.6 m, Height at the apex = 2.8 m) with angle iron of size 50 mm x 50 mm x 5 mm (placing at 2000 mm apart ) embedding the iron posts in P.C.C. base ( not less than 600 mm) covering at the top and sides by chain link fencing, painting one coat of primer and two coats of paint including supplying and planting of flowering climbers as enclosed from both sides ( 3 nos. per metre in one side ) of the pergola to facilitate climbing by pit making (30 cm x 30 cm x 30 cm) filling the pit with the mixture of soil and organic manure and necessary maintenance by trimming etc complete as specified and directed by the department. (P.C.C. and soling to be measured and paid separately)Quotation enclosed.

For Fountain L/S

DISMENTLING OF TOILET BLOCK AND ASSAM TYPE BUILDING. ( 8.4x7.5 m )

Demolishing plain cement concrete including disposal of debris as directed for all levels. (ii) Prop (1 : 3 : 6) or richer mix

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels.

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Dismantling steel work in single sections (R.S.Joists, channels, angles, tees and flats etc.) including dismembering and stacking the materials as directed by the Department for all levels. truss and purlin of 42mm OD pipes

Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window up to 3.00 m2

Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels.

sanitary work- repair Clearance of service septic tank and removing the night soil and debris etc. manually from the tank/chamber to a distant place preferably during holidays or at night by bailing out the deposited night soil,buring the same in near by trenches/pits which has been dug earlier and covering the same.The service septic tank is cleaned with clear water and completed as directed by the Department. (a) For 200 users

Cleaning & clearing the inspection chamber which is partly filled with night soil connected to septic tank soak pit with both side soil pipe of length 1.80m manually and disposed off the block by pushing with bamboo kamis as directed by the Department.

NK AGARWALLA