PROVN OF GUN SHED NEAR BLDG NO. P 14 AT DINJAN MIL STN UNDER GE DINJAN

Amount

M & L for boring 150 mm dia hole in all kind of soil upto maximum depth 10 meter or up to refuse (N=100) whichever meet earlier including collection of undisturbed sample from cohesive soil only conducting standard penitration test at 10 meter and 1.5 meter interval alternatively as per relevant IS code complete all as directed.

Completion of field work & lab test result and submission of report in Per Job quadruplicate suggesting depth of foundation type of fundation and safe bearing capacity with CD-1 (one) copy complete all as specified and directed.

Surface excavation n exc 30 cm and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m depth, for foundation, etc. or for shafts, wells, cessipts, manholes, etc. n exc 10 Sqm on plan and n ecx 1.5 m in depth and getting out soft/losse soil as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil complete all as directed.

Removing excavated surplus soil n. exc 50 m and depositing where directed at level n.exc 1.5 m above the starting point all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete all as specified and directed.

M&L hard core of gauge exc 63mm but not exc 100 mm depoted ,spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface broken stone or boulders complete all as specified and directed.

M&L TMT bars 10 mm and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified

Description as per item ser No. 7 here-in-before but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders confirming to all as specified.

Use and waste of Form work to sides of concrete foundations ,footings , bases of columns ,raft and raft beams , sides and soffits ( if any) of foundation and plinth beams and similar vertical or to a batter flat rough finished surface complete all as specified.

Use and waste of Form work to sides of pillars , posts , struts , piers , columns and stantions rough finished surface square , rectangular or polygonal complete all as specified and directed.

Use and waste of form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc fair finished surfaces of concrete flat all as specified and directed.

M&L providing reinforced cement concrete type B1 (1:2:4) (Nominal mix) using 20 mm graeded stone aggregate as in beam, cantilever,bressumers, lintel over 1.5 mtr span concrete flat all as specified and directed.

M&L providing reinforced cement concrete type B1 (1:2:4) (Nominal mix) using 20 mm graeded stone aggregate as in foundation ,including rafts,footings foundation beams , plinth beams, bases of columns etc ,basement slab ,underreamed piles and mass concrete all as specified and directed.

M&L providing reinforced cement concrete type B1 (1:2:4) (Nominal mix) using 20 mm graeded stone aggregate as in columns, pillars piers, posts and struts complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement.as specified and directed.

M&L for randering 15 mm thick on other than fair faces of brick work or concrete surface in CM 1:4 and rendering is to be finish complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces incl preparation of surfaces complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.

S&F for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc gde Fe-410 W (Gde E- 250) quality A complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and Fe-410 W (Gde E- 250) quality A complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces and as all specified

M&L for preparation of New painted steel surfaces of any description, n exc 10 cm in width or girth, not otherwise described when unconnected with other painting or when painted in a different tint and applying Two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and as directed.

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with self tapping screws all as specified and directed.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B2 (Using 40mm graded stone aggregate) 100mm thick as in floor laid in panels and finished top even and fair using extra cement all as specified and directed.

M&L for forming construction joints 10mm wide and 100mm deep and filling with joints sealing compound grade 'A' all all as specified and directed.

Supply only Sand cushioning for laying of paver block and protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thick-ness and consolidated (punned) upto 180mm thicknesscomplete all as specified and directed.

M&L for 80mm thick machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006, M -40 grade with grey cement with pigment over 50mm thick sand cusion layer complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately)

M&L for PCC 1:3:6, type C1, using 20mm graded aggregate as in coping complete all as specified and directed.

S & F Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges of thickness 1.25mm of dia 150mm complete all as specified & as directed.

S &F for PVC (SWR) pipes single soketed, in any length with rubber ring joints, fixed to walls, 110mm bore pipes complete all as specified and directed.

S & F for PVC (SWR) bends any radius with access door, 110mm bore complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) Type C2 using 40 mm graded aggregates as in plinth protection/paving including finishing surface even and fair without using extra cement complete all as specified and directed

Brick work with sub class 'B' brick, staright or curved or plain exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all costs such as royalty if any transportation taxes etc. for area filling / forming including raising earth spreading in layers not exc 30 cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high / depth from EGL. Notes:- (i) Earth required for the item shall be suppied by contractor out side MOD land of any lead at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc. shall be deemed to be included in the unit rate quoted by the contractor. (iii) with reference to clause 3.6 of MES schedule Part-II on serial page no- 21 it is clarified that measurement of the above item shall be finished embankment/ traverse of filled earth after consilidation/ copmaction and 5% deduction shall be made from measured and calculeted volume to allow for increase in bulk. (iv) Total quantity/ partial of earth may not be available in Dinjan area. The contractor shall bring the earth outside area it is advised to quoted the rate considering availability of soil and its lead involved.

Material and labour for point wiring for One light/fan point controlled by one,one way switch with 2.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC Conduit of suitable size not less than 20mm (medium grade) concealed including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly ncluding sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top bakelite sheet cover 3 mm thick complete all as specified and directed.

Description all as per Ser item No. 37 here-in-before but One 3 Pin 5 Amps socket out let point on independent board.

Description all as per Ser item No. 37 here-in-before but One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs.

Supply and fixing of switch socket combination 3/5 Pin, 2 in 1, 5 Amps, 240 volts flush type (non shuttered) complete all as specified and directed.

Supply & fixing of socket outlet 2 in 1, 3/5 pin 5 Amps, 240 Volts, flush type (non shuttered) complete all as specified and directed.

Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and directed.

Supply and fixing Inverter type LED batten(1.2m) made of CRCA sheet housing with PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen at a minimumsystem efficiency of 115 lumen per watt and total power consumption not more than 18/20 W iincluding driver. It has a rated system life time of 40000 burning hour at L70 and should have a colour temperature of 6500K, CR>80 , THD < 10 % and PF>0.95 complete all as specified and directed.

Supply and fixing in repair of MCB Distribution board TPN 4 Way for mounting SPN/ SP/TPN/TP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed.

Supply and fixing in repair of MCB Distribution board SPN 8 Way for mounting SPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed.

Supply & fix of MCB DP 40 Amps 'B' Series 10 KA 240 volts complete all as specified and directed.

Supply & fix of MCB SP 6-32 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of dia 4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed. Note : No extra payment will be for the earthing GI wire of size 4 mm dia all complete as specified and as directed.

Supply and fixing of excellent efficiency at 160lm/w and right optics baylight 200W suited for various applications. Offering excellent beam and glare control, with high wattage illumination fixed on ceiling including all the equipment needed for installation all complete as specified and as directed.

Supply and fixing LED Bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics along with all the accessories complete with IP 65/66 protection complete all complete as specified and as directed.

S&F Bldg light bracket fabricated out of GI Tubing light grade 32 mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including taking down old corroded one all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC conduit of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring two run of 4 Sqmm cable one run of casing capping and one run of 2.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Supply, laying & testing cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor of size 25 sqmm 4 core, 1100 volts grade complete all as specified and directed.

Excavating in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, Taking Out and Laying of Cables, etc. and getting out in Soft/ Loose Soil, complete all as specified and as directed.

S&F LT cable cover , well burnt, with dimention Class LV, Type I, flat, size 250mm x 150mm x 40mm laid breadth-wise along the axis of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Boring under without disturbing the top surface of the road for passing through GI protection pipe 50mm bore, not exceeding 10m in single length complete all as specified and as directed. Note: Rate for Necessary machanry and assesories required for boring deemed to be included in the quoated rate by contractor.

M/S R D CONSTRUCTION (BID ID -3437579)

STANDARD ELECTRIC WINDERS (BID ID -3436765)

M/S. UDDUG CONSTRUCTION (BID ID -3438351)

M/S A K ENTERPRISE (BID ID -3438176)

FREEZCON (BID ID -3436778)

Garg Brothers (BID ID -3438143)

M H KHAN (BID ID -3438108)