Construction of Multi Purpose Hall under 13th FC for 2013-14, Badarpur Develoment Block

Amount

Earth work in excavation for foundation treanches of walls, retaining walls, footing of column etc.etc. (A) Up to depth of 2.00m below the existing ground level. (a) In ordinary soil.

Providing soling in foundation and under floor at all levels with stone / best quality picked jhama bricks, sand packed etc.etc. (a) Brick on flat soling.

Plain cement concrete works with coarse aggregate of size 13mm to 32mm in foundation bed for footing steps, walls, brick work etc. (a) 1:3:6

Providing and laying plain / reinforced cement concrete work etc.etc. (a) In substructure upto plinth level (b) M 20 or 1:1.5:3

Providing and laying plain / reinforced cement concrete work etc. (b) In superstructure from plinth level upto 1st floor level (b) M20 or 1:1.5:3

Providing form work in ordinary timber planking etc.etc. In substructure upto plinth level, Foundation, footing, base of columns etc. (ii) Using 25 mm thick plank.

Providing form work in ordinary timber planking etc.etc. Sides of tie beam, grade beams etc. at or below ground level. (ii) Using 25 mm thick plank.

Providing form work in ordinary timber planking etc.etc. In superstructure from plinth level upto 1st floor level (a) Column, Pillar, Post etc. (ii) Using 25mm thick plank.

Providing form work in ordinary timber planking etc.etc. sides an sofits of beam hunching, cantilever, girder, bressumers and lintel etc. (ii) Using 25mm thick planks.

Providing form work in ordinary timber planking etc.etc. Stair case with slopping or stepped soffit including rises and stringers but exclusing landing

Providing form work in ordinary timber planking etc.etc. flat surface such as soffits of supported floors, roofs, landing, balconies, chajjas horizontal ties and the like (a) Using 25mm thick planks.

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S code for RCC work etc.etc. (Upto 1st floor level) (b) ISI approved super ductile TMT Bar (ii) Other ISI marked

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S code for RCC work etc.etc. (Upto 1st floor level) ( C) ISI approved M.S Rod.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed (I) In Sub-strructure upto plinth level including dewatering if necessary ( C) In prop. 1:5

Earth / Sand filling in plinth in layer not more than 150mm thick including necessary, carriage, watering, ramming etc.(B) With hill sand obtaining by truck carriage loading and unloading and carriage to the site work.

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 and 15 mm thick wearing layer in cement concrete in prop. 1:1;22 laid in panels and finished with a floating coat of neat cement finish.

112 mm thick 1st class brick nogged wall in cement morter including racking out joints and curing complete as directed super-structure above plinth upto 1st floor level (a) In prop. 1:4

20 mm thick cement plaster in two coats, backing coat 15 mm an finishing coat 5 mm thick on rough side of single or half brick walls for interior plastering up to 1st floor level etc.etc.

15 mm thick plaster in single coat on fare side of single or half brick wall for interior plastering upto 1st floor level etc.etc. (b) In cement morter 1:4

10 mm thick cement plaster on celling and soft of stair case upto 1st floor level including curing complete as directed (b) In cement morter 1:4

Extra over Item No. 6.2.1 to 6.2.3 for plastering on ceilling and soffits of stairs upto 1st floor level (instead of plastering on walls) including curing complete as directed.

Providing wood work in frame (chowkathas) doors, windows and other similar works …etc.etc. (b) 1st class local wood (Hollock, Sundi)

Providing fitting and fixing fully glazed windows with sash bars including oxidised M.S butt hingges (B) With Gamari wood (i) 40 mm thick

Providing fitting and fixing fully glazed clerestory window ……..etc.etc. (B) With Gamari wood. (i) 40 mm thick.

Providing and fixing allied sheet bedded in putty and fixed with / without beading including necessary cutting of glass to required sizes …etc. (a) 4 mm thick

Providing and fixing rolling shutters of approved make made of 80 mm wide laths interlocked together through their entire length and joined ……etc.etc.

Providing and fixing in position collapsible M.S Shutters with vertical channels 20mm x 10 mm x 2 mm ………etc.etc.including applying priming coat of red lead paint.

Providing fitting and fixing M.S. grill of required pattern for windows / calerestory windws opening with M.S flat ….etc.etc. 1. Plain Grill (a) Fixed to wooden frame

Applying priming coat over new steel and other metal surface over 100 mm in width or girth etc.etc. (a) With ready mixed red lead / red oxide primer

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand etc.etc. (i) Surfaces over 100 mm in width / girth (a) With Asian paint / Berger paint / I.C.I paint etc.

Applying priming coat over new wood based surface over 100 mm in width / girth …..etc.etc. (a) With ready mixed paint, wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood base surface with enamel paint ……etc.etc. (b) High gloss (Asian paint / Berger paint / ICI paint)

Applying one coat of cement primer of approved throughly brooming the surface ……etc.etc. sand paper smooth.

Finishing wall with water proofing cement paint with approved brand and manufacture ….etc.etc.

Extra item No. (b) above for finishing with cement paint on ceiling and or sloping roof.

Approved one coat of distemper primer of approved brand and manufacturer on wall surface ……..etc.etc.

Distempering with dry distemper of approved brand and manufacture ( two coats) and of required shade on new wall surface …….etc.etc.

Extra over item No.-(f) above for distempering with dry distemper on ceiling and or sloping roof

Providing and laying plain / reinforced cement concrete works etc.etc. (b) In superstructure from plinth level upto 1st floor level (b) M 20 or 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering and propping etc. (a) Column, Pillar, post etc. (ii) Using 25 mm thick plank.

Providing form work of ordinary timber planking etc. sides and sofits of beam hunching, cantilever, girder, bressumers and lintel etc. (ii) Using 25mm thick plank.

Providing form work of ordinary timber planking so as to give a rough finish including centering, etc.etc. Stair case with slopping or stepped soffit including raises and stringers but excluding landing.

Providing form work of ordinary timber planking etc. flat surface such as soiffits of supported floors, roofs, landing, balconies, chajjas horizontal ties and the like. (a) Using 25mm thick plank.

Supplying fitting & fixing in position reinforcement bars conforming to relevant I.S. code for RCC work etc.etc. (b) ISI approved super ductile TMT Bar. (ii) Other ISI marked.

Supplyinf fitting & fixing in position reinforcement bars conforming to relevant I.S code of RCC work etc.etc. ( C) ISI approved M.S.Rod

Providing ceramic tiles of approved quality size, shape and thickness etc.etc. (a) Normal range (300x300mm) (f) Nitco made

112 mm thick 1st class brick nogged wall in cement morter including racking out joints and curing complete as directed superstructure above plinth upto 1st floor level (a) In prop. 1:4.

Providing polished ceramic wall tiles of approved quality, size, shape and thickness etc.etc. (b) Executive range (200x300mm) (e) Nitco made.

20mm thick cement plaster in two coats, backing coat 15mm and finishing coat 5 mm thick on rough side of single or half side wall etc.etc. (b) In cement morter 1:4.

15mm thick plaster in single coat on fare side of single or half brick wall for interior plastering upto 2nd floor level etc.etc. (b) In cement morter 1:4

10mm thick cement plaster on ceilling and soft of stair case upto 2nd floor level including curing complete as directed (b) In cement morter 1:4.

Providing wood work in frame (Chowkathas) doors, windows , clerstory windows and other similar works …..etc.etc. (b) 1st class local wood (Hollock, Sundi)

Providing fitting and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band …..etc.etc. (a) Decorative type face panel and block board core. (ii) 35mm thick.

Providing fitting and fixing fully glazed windows with sash bars including oxidised M.S.butt hingges etc.etc. (B) With Gamari wood (i) 40 mm thick.

Providing and fixing clear sheet glass beded in putty and fixed with / without beading including necessary cutting of glass to required size etc.etc. (i) Area of glass panes excluding 0.15 sqm but nor excwwding 0.52 sqm (a) 4 mm thick.

Providing fitting and fixing M.S. grill of required pattern for windows / calerestory windws opening with M.S flat ….etc.etc. 1. Plain Grill (a) Fixed to brick work / PCC / RCC

Applying priming coat over new steel and other metal surface over 100 mm in width or girth etc.etc. (a) With ready mixed red lead / red oxide primer

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand etc.etc. (i) Surfaces over 100 mm in width / girth (a) With Asian paint / Berger paint / I.C.I paint etc.

Applying priming coat over new wood based surface over 100 mm in width / girth …..etc.etc. (a) With ready mixed paint, wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood base surface with enamel paint ……etc.etc. (b) High gloss (Asian paint / Berger paint / ICI paint/J&J paint / Nerolac)

Applying one coat of cement primer of approved throughly brooming the surface ……etc.etc. sand paper smooth.

Finishing wall with water proofing cement paint with approved brand and manufacture ….etc.etc.

Applying one coat of distemper of approved brand and manufacture on wall surface after throughly brushing the surface free from ….etc.and sand paper smooth

Distempering with dry distemper of approved brand and manufacture ( two coats) and of required shade on new wall surface …….etc.etc. preparing surface even and sand paper smooth.

Extra over item 13.2.2(f) above for distempering with dry distemper on ceiling and or sloping roof.

Providing and laying plain / reinforced cement concrete works etc.etc. (b) In superstructure from plinth level upto 1st floor level (b) M 20 or 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering and propping etc. (a) Column, Pillar, post etc. (ii) Using 25 mm thick plank.

Providing form work of ordinary timber planking so as to give a rough finish etc.etc. sides and sofits of beam hunching, cantilever grider, bressumers and lintel etc. (ii) Using 25mm thick plank.

Providing form work of ordinary timber planking so as to give a rough finish etc.etc. Flat surface such as sioffits of supported floors, roofs, landing , balconies, Chajjas, horizontal ties and the like (a) Using 25mm thick plank.

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S.Code for RCC work / RR walling including strengthening cleaning etc.etc. (a) From primary producer super ductile TMT reinforcement bar.

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S.Code for RCC work / RR walling including strengthening cleaning etc.etc. (c) ISI approved M.S.Rod.

Providing ceramic tiles of approved quality size, shape and thickness etc.etc. (a) Normal range (300x300mm) (f) Nitco made

112 mm thick 1st class brick nogged wall in cement morter including racking out joints and curing complete as directed super structure above plinth upto 1st floor level (a) In proportion - 1:4)

Providing polished ceramic wall tiles of approved quality, size, shape and thickness etc.etc. (b) Executive range (200x300mm) (e) Nitco made.

20mm thick cement plaster in two coats, backing coat 15mm and finishing coat 5 mm thick on rough side of single or half side wall etc.etc. (b) In cement morter 1:4.

15mm thick plaster in single coat on fare side of single or half brick wall for interior plastering upto 2nd floor level etc.etc. (b) In cement morter 1:4

10mm thick cement plaster on ceilling and soft of stair case upto 2nd floor level including curing complete as directed (b) In cement morter 1:4.

Providing wood work in frame (Chowkathas) of doors, windows, clerstory windows and other similar work ………etc.etc.(b) 1st class local wood (Holloc, Sundi)

Providing fitting and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band …..etc.etc. (a) Decorative type face panel and block board core. (ii) 35mm thick.

Providing fitting and fixing fully glazed windows with sash bars including oxidised M.S.butt hingges etc.etc. (B) With Gamari wood (i) 40 mm thick.

Providing fitting and fixing fully glazed clerestory window ……..etc.etc. (B) With Gamari wood. (i) 40 mm thick.

Providing and fixing clear sheet glass beded in putty and fixed with / without beading including necessary cutting of glass to required size etc.etc. (i) Area of glass panes excluding 0.15 sqm but nor excwwding 0.52 sqm (a) 4 mm thick.

Providing fitting hosting fixing of roof trusses including purlin fabricated out of M.S. blak-tubes and fixing ceiling joists as per design and drawing as directed.

Providing, Bara galvalume sheet roofing (Dyna roof/Satham/Durakolor / Century Wells / Durshine (TATA BLUESCOPE) at all levels including fitting and fixing self tapping screws complete (iv) 0.50 mm thick.

Providing Bara galvalume sheet roofing accessories (Dyna roof / Satham / Durakolor / Century Wells / Durshine (TATA BLUESCOPE) (Ridges / Valley /Gutter / Flashing) at all levels including fitting and fixing self tapping screws complete (iv) 0.50 mm thick

Supplying fitting and fixing ceiling tiles of 10mm thick made from Duratuff nedium density fibre board in size 1200mm x 1200 mm x 10mm with sal wood timber frame (to be measured and paid separately) leaving an expansion gap of 3 mm with necessary nails, screws etc. including 1st class local wood (Hollock / Bonsum / Sundi etc) beading of size 50mm x 12mm complete as directed and specified.

Providing fitting and fixing M.S grill of required pattern for windows / clerestory windows/ opening with M.S.flats at required spacingin frame all round…….etc.etc. 1. Plain grill (a) Fixed to wooden frame.

Applying priming coat over new steel and other metal surface over 100 mm in width or girth etc.etc. (a) With ready mixed red lead / red oxide primer

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand etc.etc. (i) Surfaces over 100 mm in width / girth (a) With Asian paint / Berger paint / I.C.I paint etc.

Applying priming coat over new wood based surface over 100 mm in width / girth …..etc.etc. (a) With ready mixed paint, wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give and even shade etc.etc. (b) High gloss (Asian paint/Berger paint/ICI paint / J&N Paint / Nerolac)

Applying one coat of cement primer of approved throughly brooming the surface ……etc.etc. sand paper smooth.

Finishing wall with water proofing cement paint with approved brand and manufacture ….etc.etc.

Applying one coat of distemper of approved brand and manufacture on wall surface after throughly brushing the surface free from ….etc.and sand paper smooth

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on new wall surface to give an even shade, over and including priming coat of white primer etc.etc. sand paper smooth.

Extra over item 13.2.2(f) above for distempering with dry distemper on ceiling and or sloping roof.

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sq mm FR PVC insulated copper conductor single core cable etc.etc. as required

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts etc.etc. With 2 x 2.5 sq.mm + earth continuity with 1 x 1.5 sq. mm in 20 mm dia 2 mm thick / heavy rigid PVC IS : 9537 Part - III conduit

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts etc.etc. With 2 x 4 Sq mm + earth continuity with 1 x 2.5 sq.mm cable in 20 mm dia 20 mm thick / heavy rigid PVC IS : 9537 Part - III conduit

Wiring for drawing sub - main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS - 694 1990 with flaxible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts etc.etc. With 2 x 6 sq.mm + earth continunuity with 1 x 4 sq.mm cable in 25 mm dia 2 mm thick / heavy rigid PVC IS : 9537 Part - III conduit

Supplying including fitting fixing of following A.C Ceiling fan complete with all accessories like down rod , canopy etc. of following sweeps with making necessary connection with approved by the Deptt. As required complete and as directed by the Department (Without regulator) Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS - 390 Deco Havells make)

Supplying including fitting fixing of following A.C Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. As required complete and as directed by the Deptt. Ventil Air DB 300 mm sweep (Havells make)

Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE) MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department. 120 watt electronic modular step speed control 2 - module type

Supplying extra down rod of 30 cm long G.I.pipe 20 mm dia heavy gauge including painting etc. as directed

Supplying extra down rod of 10 cm long G.I.pipe 20 mm dia heavy gauge including painting etc. as directed

DDLH18EB / N6 1 x 18W CFL CROMTON make Recessed mounted horizontal lamp down light with bright anodized aluminium rflector etc.etc. (equivalent PHILIPS / WIPRO / BAJAJ / Havells / HPL / SOLAR / JAQUAR make)

Supplying including fitting and fixing of the following Ballast for TL/TL-TD lamps (HF control gear) complete as directed and specified by the Deptt. (Philips / Havells / Bajaj make) EBT 228 TL5 240 V 2 x TL5 28 W

Supplying including installation of socket outlet 6 Amps 3 pin universal combain shuttered complete etc. etc. including making necessary connection as directed by the Deptt.

Supplying with fitting fixing of 6 amp one way modular clip in switch MODEL RANGE LEGRAND (MYRIUS) ANCHOR (VIOLA) MK (WRAPAROUND/PLUS) ABB (CHERION) KOLORS (KREST) SCHNEIDER (VIVACE) CRABTREE including making necessary connection as direction of Deptt.

Supplying including fixing of following metal boxes for MODEL RANGE LEGRAND (ARTEOR) ANCHOR (AVE) MK (BLENZE) SCHNEIDER (ZENSELO) CRABTREE (MURANO) in surface /recessed system complete as per direction of department. 3 module type metal

Supplying including fixing of following metal boxes for MODEL RANGE LEGRAND (ARTEOR) ANCHOR (AVE) MK (BLENZE) SCHNEIDER (ZENSELO) CRABTREE (MURANO) in surface /recessed system complete as per direction of department. 6 module type metal

Supplying including fitting fixing of MODEL RANGE LEGRAND (ARTEOR) ANCHOR (AVE) MK (BLENZE) SCHNEIDER (ZENSELO) CRABTREE (MURANO) front plate of suitable colour as per direction of Department. 3 module

Supplying including fitting fixing of MODEL RANGE LEGRAND (ARTEOR) ANCHOR (AVE) MK (BLENZE) SCHNEIDER (ZENSELO) CRABTREE (MURANO) front plate of suitable colour as per direction of Department. 6 module

Supply including installation of socket out let 6/16 Amps 3/5 pin combine shuttered complete etc.etc. including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch with LED MODEL RANGE LEGRAND (MYRIUS) ANCHOR (VIOLA) MK (WRAPAROUND/PLUS) ABB (CHERION) KOLORS (KREST) SCHNEIDER (VIVACE) CRABTREE including making necessary connection as direction of Deptt.

Supplying with fitting and fixing sheet steel, phosphatised powder painted dust & vermin proof double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Natural link, Earth bar and din rail etc. etc. Schneider neo break, C & S, Havells, INDOASIAN HPL or equivalent as approved by the Deptt. 8 way SPN double door.

Supplying with fitting and fixing sheet steel, phosphatised powder painted dust & vermin proof double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Natural link, Earth bar and din rail etc. etc. ABB, Schneider MG, legrand, Hager make. 12 way TPN(4+36) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt. B Series (Schneider MG, Legrand, Hager make) 6 to 32A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt. 100mA sensitivity DP RCBO (ABB, Schneider MG,legrand, Hager make) 32A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 4P MCCBof the following capacity complete with making necessary connection as approved specified and directed by the Deptt. 25KA 415V 50Hz 4P MCCB (Schneider, Legrand, Siemens, Indo Asian make) 63A

Supplying with fitting and fixing panel mounting open execution 35/36 KA 415V 50Hz 4P MCCBof the following capacity complete with making necessary connection as approved specified and directed by the Deptt. 35/36KA 415V 50Hz 4P MCCB (Schneider, Legrand, Siemens make) 160A

Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35 M x 1.50 M x 0.40 M made of 16 SWG/1.66 mm thick C.R. sheet and 35mm x 35mm x 5mm size angle having 4 no legs at the bottom etc.etc. Slide fuse unit - 3 Nos. (Incoming and out going Switch Gear of reqd. rating will be measured and paid separately)

Supplying installation & testing of Copper Plate earth station with 600mm x 600mm x 3mm copper earth plate with necessary 40 mm dia G.I. medium duty watering pipe with G.I.fittings ……….etc.etc. as directed by the Deptt.

Extra for using salt (5 K and Charcoal) 64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying and laying of 25 x 5 mm G.I.strips drawn on surface from earth electrode to Electrical switch gears, machineries etc. complete with supply of G.I. nuts & bolts, screws etc. including riveting, soldering & making necessary connection as approved, specified and directed by the Deptt.

External electrification 4% of civil work

Sanitary fittings (Lump sum)

Internal Water supply (Lump sum)

Normal preparation of site (Lump sum)

Interior Decoration (Furniture, Audio system, Projector, Screen, other Accessories, interior decoration Lump sum)

ALIM UDDIN TAPADAR

KAZI MD BADRUZZAMAN