WBPHED/AE/CMSD/eNIT06/S02

Amount

i)Purba sahapur P.H. No.-1 & 2

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire in PVC csing caping 'FR' with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire to light/fan/ points with Piano Key type switch fixed on switch board cum JB.

a) average run 5 mtr. -

Supply & delivery of the following Items.

100 Amp. Re-wireable type TPN main switch (CONFORMS: IS/IEC600947-1&3). (Make: Approve make of P.H.E. Dte.)

100 Amp. 4 way Copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain chair etc.. (Make: Approve make of P.H.E. Dte.)

Supply and delivery of 100 Amps male female kit Kat fuse unit.

TP MCB 16Amp, 10KA (approved make)

16 Amp TPN, 415V AC, 50Hz Main switch with rewireable porcelein fuse unit (approved make)

DOL starter, 415V, 50Hz, 3Ph with overload relay (range: 2.5-4 amp) for 0.5 H.P Chlorine motor [Make : L&T (type- MK1)/ Havells/ Siemens ]

Supply and Delivery of 25 mm², 1.1 KV grade. 3.5 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make)

Labour charges for installation of Busbar,Mainswitch,Starter and drawing of armoured cable by using suitable size cable gland,saddle and testing complete as per direciton of EIC.

Supply & delivery of the following Items.

16A DP MCB with enclosure (Make- Havells/ Siemens/ ABB/ L&T)

Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete (Make- H.Guru)

4ft long 20 watt LED tube light set.make-Phillips/approved make

14 watt Led lamp.(make-Phillips/approve make)

Bulkhead light fittings on wall (Make- Bajaj/ Havells/ approved make)

Labour charges for fitting fixing of above items and testing complete as per direciton of EIC.

Installtion and commissioning of chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplyig of all required materials and testing the entire set as per direction of EIC.

Supply and fitting fixing of Ceiling fan (Make: Usha /C.G / Havells/ approved make) 1200mm. sweep complete with rubber bush, nut, bolt etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete.

Supply & fitting fixing of 45 watt, LED Fixture set for Phillips Model no. BRP 031 LED with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C.

Painting of CIDF pipeline and Earting Strip by supplying approved quality paint after scrabing the same.. at P.H. No.- I & II.

Making earthing arrangement

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long and 1 x4 SWG Gl (Hot Dip) wire (4 Mts. long), 13 mm dia x80 mm long Gl bolts, double nuts, double washers incl. S & F 15mm dla Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level as below: By lSl-Medium Gl pipe

Extra for providing masonery enclosure on the top of the earthelectrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, Gl reducer including drilling of 46 nos.12 mm dia holes on the Gl pipe

Extra for treatment of soil by using salt & charcoal or coke forplate electrode.

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with Gl saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc.

Supplying and fitting-fixing of earth busbar of galvanized (Hot dip) fVS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolt,nuts,washers,spacing isolator set etc.as required Length of busbar is 0.5 mtr.

Add GST @ 18%

Add Cess @ 1%

CHATTERJEE ENTERPRISE (BID ID -6797559)

MITRA ENTERPRISE (BID ID -6797544)