Loading
Loading…
Loading…
Tender Value
₹8.6 L
EMD Value
₹17,200
Closing Date
30 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
C AND W
18 conditions · 7 needing a document upload
The tenderer shall have valid NABL accreditation certificate for calibration of the measuring gauges / instruments and copy of the NABL accreditation certificate along with Scope shall be submitted along with the bid. Non submission of the valid NABL accreditation certificate shall result in Summarily Rejection of his/their bid.
ANNEXURE-2 (FORM FOR REPORTING OF EMPLOYMENT). In case of failure of the bidder to submit the declaration, their offer shall be summarily rejected.
ANNEXURE-6,6A (FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS). Failure of submission of above certificates as mentioned, their offer will be summarily rejected
Clause wise compliance as per Annexure 6. Failure of submission of above certificates as mentioned, their offer will be summarily rejected
The bidder shall upload relevant documents for identification of the tenderer as per tender conditions.
Certificates and documents required as per Scope of work.
Annexure 9. Proforma for self certification of Local content.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
5 conditions · 2 needing a document upload
Please refer uploaded tender document.
The tenderer shall have to upload the complete bank details such as Bank Name Account No., IFSC code, PAN No. etc., of his firm with the tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
CALIBRATION OF VARIOUS GAUGES, MEASURING INSTURMENTS AND TEST BENCHES AVAILABLE AT C&W DEPOTS OVER MYSURU DIVISION
YM226CALIBRATION~SWR
YM226CALIBRATION
Open
Works - General
24 Months
Dharwad, Karnataka
₹0
₹17,200
8 Sept 2026
8 Sept 2026
16 Sept 2026
379 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 8,61,282 | ||
| — | 2.00 | — | — | ||
| Accuplus plastic LCD ULTRASONIC Thickness gauge | — | — | — | 3,540 | |
| — | 4.00 | — | — | ||
| Adapter Bore gauge For Class E Radius 110.5 | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| Adapter Bore gauge For Class E Radius 110.5 ID-260 | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| Adapter Bore gauge For Class K Radius 124.993 | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| ADAPTER BORE GAUGE, SIZE: BORE RADIUS-124.993 MM(+0.127/-0.00MM)FOR | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| ADAPTER BORE GAUGE. Size-:Bore - Radius-: 110.5mm (+0.015/--0.112) FOR NARROW JAW ADAPTER, WIDE JAW ADAPTER & | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| Adapter crown seat gauge No-1 with (Retrofitted) CASNUB-22W,22W(M) Fig | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| Adaptor bore gauge E class | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| Adaptor bore gauge K class | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| Adaptor crown lug gauge for CASNUB 22W, 22W(R) & 22W(M) Fig No-10 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Adaptor crown seat gauge-1 CASNUB 22NL, 22NLB & 22HS Fig No-16 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Adaptor side lug gauge for CASNUB 22NL, 22NLB & 22HS. Fig No-15 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adaptor sides gauge CASNUB 22NL, 22NLB & 22HS Fig No-17 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Crown Gauge No.01 Casnub 22 NLB HS Bogie Fig No: 16 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Crown Gauge No.01 Casnub 22W(M)-W Fig NO;11 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Crown Lug Gauge CASNUB 22, NL. 22 NLB, & HS Bogie | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Crown Lug Gauge Casnub 22NL, NLB & HS Bogie Fig No:14 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Crown Lug Gauge Casnub 22W, W (RTF) W-M Bogie Fig No: 10 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Side Gauge Casnub-22W, M, Fig No: 13 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Side Gauge Casub 22NL.NLB, HS bogie Fig No: 17 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Side Lug Gauge Casnub 22NL. NLB, HS Bogie FigNo: 15 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Adopter Side Lug Gauge Casnub 22W (RTF) 22W (M) Fif No:12 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Aligning Wing Limit Gauge | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Alignment checking gauge to check the alignment of centre pivot and side | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Anti-rotational lug gauge CASNUB 22W, 22W(M), 22NL, 22NLB &22HS Fig No- | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| APM setting gauge | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Axel Box Crown Gauge No.02 Fig No: 19 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Axle Box Crown Gauge No.01 Casnub 22W Bogie Fig No: 19 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Axle Box Crown Lug Gauge Fig No: 18 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Axle Box Sides Gauge Casnub 22W Bogie Fig No: 21 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Bent Link U Cap Screw coupling gauge | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Bolster land & rotation stop lug gauge for CASNUB 22W, 22WM, 22NL, 22NLB | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Bolster Land and Rotation Stop LUG Gauge Fig No. 40 Casnub -22W. (WM.NL.NLB) HS Bogie (Size | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Bolster Spring gauge | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Bottom Anti Creep Horizontal Location Gauge-CBC | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Bronze Wearing piece gauge (45mm Go-42NOGO) | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| BSS Hanger Pin Gauge (GO.37mm, NO GO-35.5mm) | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Buffer Height Gauge | — | — | — | 8,260 | |
| — | 2.00 | — | — | ||
| Buffer Height Gauge CBC | — | — | — | 8,260 | |
| — | 2.00 | — | — | ||
| Buffer Height Gauge SL NO: 2614/17 | — | — | — | 8,260 | |
| — | 2.00 | — | — | ||
| Buffer height gauge with tape with box | — | — | — | 8,260 | |
| — | 2.00 | — | — | ||
| Buffer Plunger Face Gauge | — | — | — | 4,248 | |
| — | 2.00 | — | — | ||
| Buffer Projection Gauge | — | — | — | 8,260 | |
| — | 4.00 | — | — | ||
| C&W gauges | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| CBC Contour gauge - 01 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| CBC Contour Gauge - 02 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| CBC Defect Gauge (1&2). | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| CBC Gauge No.01 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| CBC Gauge No.02 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| CBC Height Measuring Gauges | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| CBC knuckle stretch Gauge No-4 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| CBC- Contour worn limit gauge No-1 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| CBC- Contour worn limit gauge No-2 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| CBC- Knuckle nose wear strenth gauge | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Center Pivot Gauge CASNUB 22NL, 22NLB & 22HS | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Center Pivot Gauge, CASNUB 22NL, 22NLB & 22HS Sl No 113/25 Fig No 46 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Centre Pivot Gauge (1) BLC LCCF -20(C) Bogie Fig No: 4.16 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Centre Pivot Gauge (Liner) BLC LCCF 20(C) Bogie Fig No; 4.14 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Column Gauge Casnub 22W, (M),NLB & HS Bogie Fig No: 25 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Column Gib Gauge Casnub 22W (W) (M) NL, NLB Bogie Fig No: 41 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Column Gib Gauge Casnub HS Bogie Fig No: 41 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Column Gib Gauge with Liner for Casnub, 22W, 22WM, NL,NLB & HS Bogie Fig | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Comb gauge (coach & goods) | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| comb gauge for flange thickness | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Comb Gauge for Measurin g Thickness & Height Gauge | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Comb gauge for measuring flangethickness & height of carriage & wagons | — | — | — | 5,664 | |
| — | 12.00 | — | — | ||
| Comb gauge for wagon wheel | — | — | — | 16,992 | |
| — | 4.00 | — | — | ||
| comb guage for flange thickness | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Combined Track and level Gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Combined Wear Gauge Fig No: 38 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Combined Wheel & Track distance gauge (Non Digital) | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Combiner Wear Gauge Fig No: 4.10 Fig No: 38 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Contactless laser scanning based wheel profile measurement gauge | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Contour condemning limit gauge | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Contour Maintenance Gauge | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| COTACTLESS HANDHELD WHEEL PROFILE MEASURE, ANALYSIS, DISPLAYS | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Counter worn limit gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Coupler Counter Gauge No-01 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Coupler Counter Gauge No-02 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Crown Side Gauge Casnub -22NL, NLB, HS Bogie Fig No: 30 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Dash pot spring gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Dashpot Spring Gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Digimatic Caliper (Digital) | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Digital 3 leg inside micrometer (rang 225-250mm) | — | — | — | 5,192 | |
| — | 2.00 | — | — | ||
| Digital outside Micro metre | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Digital Vernier Caliper | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Digital Wheel diameter Gauge | — | — | — | 5,192 | |
| — | 2.00 | — | — | ||
| Digital wheel distance gauge BG model | — | — | — | 6,372 | |
| — | 2.00 | — | — | ||
| Digital Wheel Distance Measuring Guage | — | — | — | 6,372 | |
| — | 4.00 | — | — | ||
| Draw hook in Hole gauge -63mm, (Strtaight link hole screw coupler) 65mm | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Draw Hook opening Gauge (GO 46Mm, NOGO-53mm) | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Electronic Wheel distance Measuring Gauge SL No: 541/18 | — | — | — | 6,372 | |
| — | 2.00 | — | — | ||
| Feeler gauge | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Feeler Gauge 2MM to 10MM | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Feeler Gauge-200Long and measuring (0.5mm to 10mm) | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Flange Thickness Gauge | — | — | — | 2,360 | |
| — | 2.00 | — | — | ||
| Flange Wear Gauge | — | — | — | 2,360 | |
| — | 2.00 | — | — | ||
| Folding Type Wheel Diameter Gauge | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Friction Shoe Wear Gauge Casnub 22W (M) 22NL NLB, HS Bogies Fig No: 44 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Gauge for A dimension | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Gauge for adapter side LUG Gauge CASNUB 22 W, RTFM Fig No. 12 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Gauge for Adopter Crown Lug Fig No: 10 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Gauge for Adopter side LUG CASNUB 22 NL,NLB, HS Bogie Fig No. 15 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Gauge for Anti Rotation Lug Casnub 22W NL, NLB. & HS Fig No: 26 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Gauge for Anti Rotation LUG Gauge CASNUB 22W, WM, NL, NLB,HS Bogie Fig No. | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Gauge for BSS hanger ICf coach | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Gauge for center pivot & side bearer alignment checking | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Gauge for Centre Pivot Bottom of CASNUB BOGIE 22W (M), NL,NLB & HS Bogie | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| gauge for dash pot guide bush | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Gauge for Pedestal Crown Roof CASNUB 22 NL, NLB, HS Fig No; 28 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Gauge for Pedestal Crown Roof Casnub 22W Bogie Fig No: 27 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Gauge for Pedestal Jaw Long CASNUB 22 NL, NLB, HS Fig No. 34 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Gauge for Pedestal Jaw Short CASNUB,22, NL. NLB, HS Fig No. 33 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Gauge for Pedestal Side Crown CASNUB 22 WM Fig No. 29 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Gauge for Pedestal Side Crown side CASNUB 22 NL, NLB, HS Fig No. 30 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Gauge for side frame Column Casnub-22,W, M. NL. NLB, HS Fig No: 25 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Gauge for trolley frame | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Gauges for Bogie Bolster Clearance (Dimension-A&B) | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| GO Gauge Vertical height alignmnt wing pocket and Guard Arm Gauge | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| hanger block ICF pin side& link side | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Infrared thermometer | — | — | — | 2,950 | |
| — | 4.00 | — | — | ||
| Inspection gauge ads asset for draw hook screw coupling | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| intermediate Profile Gauge (25 mm, 22mm) | — | — | — | 4,012 | |
| — | 4.00 | — | — | ||
| Knuckle Locking face Gauge No;09 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Knuckle Nose wear & Stretch Limit Gauge | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Knuckle wear Gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Lock Parallel Thicknes Gauge- CBC | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Magnetic Base for Dial | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Mechanical folding type Wheel Diameter Gauge 780 mm to 1030 mm (for | — | — | — | 5,192 | |
| — | 2.00 | — | — | ||
| Micro Meter (Mitutoyo) 0-25mm | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Micro Meter (Mitutoyo) 45mm | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| MITOTOYO Graduated Scale for veriner | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Mitutoyo Varner Height Gauge S/L No. 12206214 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Nogo Gauge Verticl Height Alignmnt wing pocket and Guard Arm Gauge | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Pedestal Crown Roof Casnub 22 W (M)-Bogie Fig No: 27 | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Pedestal Crown Roof Gauge CASNUB 22 NL,22NLB & HS Bogie Fig No:28 | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Pedestal jaw (long) gauge for CASNUB 22NL, 22NLB & 22HS Fig No@45"10@ | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Pedestal jaw (Short) gauge for CASNUB 22NL,22NLB & 22HS Fig No-33 | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Pedestal Jaw Gauge ( Casnub 22-W/M-Bogies Fig No: 31 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Pedestal Jaw Gauge LCCF-20C Fig No. 4:23 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Pedestal Side Gauge Casnub -22W (M) Fig No: 29 | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Pedestal sides & Crown sides gauge for CASNUB 22NL, 22NLB & 22HS Fig | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Piston Stroke measuring Gauges | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Portable digital vibration meter | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Radious Gauge for Buffer Plunger | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Root Wear Gauge | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| SET OF PLUG GO-NO-GO GAUGE FOR LHB COACHES | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Snap gauge bend link stum, Screw coupling gauge (396mm) | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Snap Gauge for Guide Bush | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| snap gauge for trunion Thickness | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Spring camber gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Steel LCD Ultrasonic Thickness Gauge, Measurement Range 12MM -225 (SL No. | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Steel LCD ultrasonic thickness gauge. | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Step Size Crown clearance Gauge | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Suspension link gauge ICF A & B | — | — | — | 5,664 | |
| — | 4.00 | — | — | ||
| Suspension Link Gauge 384/386mm | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Thickness gauge (gauges for bolster suspension pn side and link side) | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Thread wear gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Tool Taper gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Torque wrench | — | — | — | 4,248 | |
| — | 2.00 | — | — | ||
| Track distance gauge | — | — | — | 6,372 | |
| — | 2.00 | — | — | ||
| Trammelling gauge | — | — | — | 7,080 | |
| — | 2.00 | — | — | ||
| Trolley Frame Gauge | — | — | — | 7,080 | |
| — | 4.00 | — | — | ||
| Trunsion Knuckle screw coupling gauge (44mm,72mm) | — | — | — | 5,664 | |
| — | 2.00 | — | — | ||
| Truss bar hanger pin gauge | — | — | — | 2,832 | |
| — | 4.00 | — | — | ||
| Truss/Hanger Pin Gauge | — | — | — | 5,664 | |
| — | 12.00 | — | — | ||
| Tyre defect Gauge | — | — | — | 16,992 | |
| — | 2.00 | — | — | ||
| Tyre Defect Gauge (BG) SL No. 2790/25 & 2784/25 | — | — | — | 2,832 | |
| — | 12.00 | — | — | ||
| Tyre Defect Gauge (goods) | — | — | — | 16,992 | |
| — | 2.00 | — | — | ||
| Tyre Wear Measuring Gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Vernier Caliper 150 MM | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Vernier Caliper 450MM | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Wheel Dia measurement Gauge | — | — | — | 5,192 | |
| — | 2.00 | — | — | ||
| Wheel Dia Meter Gauge SL No. 0520213 | — | — | — | 5,192 | |
| — | 2.00 | — | — | ||
| Wheel distance gauge | — | — | — | 6,372 | |
| — | 2.00 | — | — | ||
| Wheel Distance gauge with spirit Level | — | — | — | 6,372 | |
| — | 2.00 | — | — | ||
| Wheel Profile Gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Wheel Route Wear Gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Wheel thread wear gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Wheel thread wear of BG DSL/Elec Locos gauge | — | — | — | 2,832 | |
| — | 2.00 | — | — | ||
| Computersied Single car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Single car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Single car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Single car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Rake car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Rake car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Rake car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Rake car test rig | — | — | — | 2,006 | |
| — | 2.00 | — | — | ||
| Computersied Rake car test rig | — | — | — | 2,006 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
CalibrationTenderDocument.pdf
ATTACHMENT
Correction slip to GCC 2022
ATTACHMENT
ACS-4toGCC-2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo5.pdf Correction Slip No 5 to GCC 2022
ATTACHMENT
IRGCCApril2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo6.pdf Correction Slip No 6 to GCC 2022
ATTACHMENT
ACS-3toGCC-2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo10.pdf Correction Slip No 10 to GCC 2022
ATTACHMENT
GCCACS1TO10-1-18_1.pdf
ATTACHMENT
GCCACS1TO10-19-34.pdf
ATTACHMENT
GCCACS1TO10-35-51.pdf
ATTACHMENT
Advance Correction Slip No 1
ATTACHMENT
GCCACS111-compressed.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo5.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo6.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo10.pdf
ATTACHMENT
2022_CE-I_CT_GCC-2022Policy14_07_2022.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .