SPECIAL REPAIR TO INTERNAL PERIMETER ROAD FROM MAIN GATE TO POST-8 AND MAIN OFFICE GATE TO PUMP HOUSE AT 25 WEU AND SPL REPAIRS TO ROAD PATH AND ROAD FURNITURE FROM BLDG NO P-98 HUDSON LINE TO SANJAY VIHAR BOUNDARY WALL UNDER GE(EAST) LUCKNOW

Amount

M & L for repairs to pot holes of any depth n.exc 1 Sqm each incl sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting round edges to at least 25mm in depth and making good by filling in screened and graded road metal, watering and well ramming (incl supply of road metal) and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 Grade at 10 Kg/10 Sqm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm & depth exc 50mm but n.exc 100mm deep and removal from site to a distance n.exc 50m complete all specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5.00 kg per 10 sqm complete all as specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as specified and directed.

M&l for Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of Paving bitumen, applied and rolled to a uniform smooth surface

M&L Bituminous premix asphaltic semi dense concrete with 5.50% binder content by weight of total mix paving bitumen VG 30 grade, poured in the forms of requisite height shape and width for rumble trip/speed breaker after lifting of forms surface finished to required shape and well compated complete all as specified and directed by Engr-in-Charge

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Material and Labour for PCC type D-2 (1:3:6) (40mm graded aggregate) as in foundation complete all as specified and directed.

Dismantling of stone slabs and tiles/paver block laid in dry of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for 80mm thick pressed precast concrete interlocking paver block reflective type, rubber moulded coloured of M-40mm grade as in floors complete all as specified and directed.

Ditto all as per item No 11 above but excet paver block.

M & L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 100 mm thick cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub-floors, sub-bases, etc.; complete all as specified

M & L for providing precast cement concrete type C1 1:3:6 ( 20 mm aaggregate ) as in copings. kneelers, apex stones complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all of quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified.

M&L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 all complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm stone aggregate as in foundation filling complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls

M&L for two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces all as specified and directed.

Demolition of cement concrete (unreinforced) in any position n.exc 15 cm thickness below and above ground level, complete all as specified and directed.

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S & F for in repair road delinator made out of MS pipe size 48x96x1200mm, for road saftey road facilities thickness 1.4mm and 1200mm length duly pure polyester powder coted in black / white colour. type Xi reflective 03 nos x 150 x 80mm high intensity prismatic (HIP) reflective tapes red/ yellow / white colour double side reflective in delineator and to be embedded in PCC 1:3:6 type C2 (using 40mm graded stone aggregate as per IRC 79/2019) be provided complete all as specified and directed complete all as specified and directed. Note: Necessary excavation for embedding of M S delinator shall be deemed to be included in the rate quoted against this item.

Supply and fixing with stainless steel frame including necessary clamps etc. retro-reflective, Double Sided, Road Name, Signboards comprising of 4mm thick aluminum composite panel (ACP) mill finished or PDVF coated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5mm thick skin of aluminium on both sides. The ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm center to center ensuring that no riveting is seen on either face of the frame. On the front and back face of the ACP, micro prismatic retro-reflective sheet conforming to Type-XI of IRC:67:2012 shall be pressure fixed as background sheet which will be over laid with electro cut transparent film of approved make and colour to create a desired road name information message. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. (Note:- Stainless steel frame shall be measured and paid saperatly)

Supply and fixing 50mm dia and 1.80mm thickness of stainless steel pipe for framing of sign board including cutting, welding and framing of stainless steel stucture complete all as specified and directed.

S&F Outdoor road traffic Convex Mirror 800mm Dia Polycarbonate Unbreakable Round Wide Angle Driveway Mirror, with Adjutable Brackets & Nuts Bolts with 50mm dia tubular Post of Length 3 Mtr for Hanging Mirror and including necessary PCC Eexcavation for fixing the post complete all as specified and directed.

Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

M/s SHIVAM CONSTRUCTIONS (BID ID -3173279)

M/s Ram Singh Agarwal (BID ID -3175240)