Electrical and Mechanical works to be carried out at Water Supply Scheme Brenty Batpora Tube well.

Amount

Supply, Installation, Testing & Commissioning of Submersible Pumping Unit as per IS 8034 for with following specification are as under : PUMP : Discharge Range = 6000 GPH Head Range= 100 mtrs Efficiency = Not less than 50% Speed = 2900 Rpm Type of pump = Bore Well Submersible Pump Type of fluid to be handled = Clear Water(Tube Well) Diametre of Tube Well= 250MM MOTOR:- Motor Rating= 17.50 HP/as per OEM Method of starting = Star – Delta Speed = 3000 (Sync). Frequency = 50 ± 3 % Hz Working Voltage = 380-415 ± 15% V, 03 phase Efficiency = Not less than 90% Class of insulation = F/Suitable for above parameters Rest of Specification/Details are as per clause 1 of Annexure A

Fabrication, providing, fitting and lowering of column pipe conforming to IS: 1239 of length 10 Rft into the 200/ 250/300 mm casing dia. production well up to the desired depth ; The job includes Providing and welding of flanges conforming to IS: 6392, Table-17 and PN 16 Size : DN 80 Class: B (Medium) Rest of Specification/Details are as per clause 2 of Annexure A

Providing/supplying and fitting of G.I flanged Rising Main at site. The Pipe shall be hot dip Galvanized, class-B confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). Size : DN 100 Class: B (Medium) Rest of Specification as per clause 3 of Annexure A

Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends. Size : DN 80 Rest of Specification/Details are as per clause 4 of Annexure A

Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units . Size: DN 100 PN:1.6/16 Rest of Specification/Details are as per clause 5 of Annexure A

Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve( NRV) as per IS 5312. Size: 100 mm PN: 1.6/16 Rest of Specification/Details are as per clause 6 of Annexure A

Fabrication, Providing and fitting of 90-120 degree bend/elbow to be fabricated out of G.I pipe, 1 m length and flanged on both ends a to make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. Size:DN 80 Rest of Specification/Details are as per clause 7 of Annexure A

Fabrication ,Providing and fitting of 90-120 degree bend/elbow to be fabricated out of G.I pipe, 1 m length and flanged on both ends a to make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. Size:DN 100 Rest of Specification/Details are as per clause 7 of Annexure A

Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts. Size: 80 mm Rest of Specification/Details are as per clause 8 of Annexure A

Fabrication of gantry mechanism by way of providing Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of steel primer and 02 coats of paint of approved shade all complete welded. The drawings and Dimensions for Gantry will be provided by Site In Charge at the time of execution of job Rest of Specification/Details are as per clause 9 of Annexure A

Fabrication of gravel Hooper for proper feeding of gravels to the borewell and platform to bear the load of pumping unit, column pipes etc i. In stringers , treads , landings etc of stair cases including use of chequered plate wherever required , all complete Rest of Specification/Details are as per clause 10 of Annexure A

Providing and fitting of M.S 4 inch hinges -6 no and M.S handle heavy -2no., Anchor bolts with nuts (M16) of 0.3 m long = 04 No. Metallic strip (350mm×50mm×3mm) = 02 No. Rest of Specification/Details are as per clause 11 of Annexure A

Supply, Installation and testing of motorized chain hoist with hook suspension along travelling trolley of proper specifications Capacity = 5 ton Hoisting speed = 2.4 M/Min Hoist motor H.P = as per requirement No. Of chain falls = 4 Min. Height of lift = 6 M Rest of specification as per cluase 12 of Annexure A

Providing , fitting , testing and commissioning of FASD Submersible pump controller MUG 20 , 20-32 Amp relay and Rest of Deatils/Technical specification are as per clause of 16 of Annexure A

Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 as per details in 13 of Annexure A Size: 16 sq.mm

Providing and fitting of 25 mm square single core copper cable for interconnecting various electrical gadets as per IS 694: 2010 along with thimbling as per requirement.

Providing and fitting perforated MS cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders or fixing on cantilever supports and including painting etc as required. 150 x 50 x 1.6mm

P/I of earthing station for substation, LT panel, DG set and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. Rest of Specifications/details are as per specification in clause 21 of Annexure A

Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps as per IS Standard

Illumination of Premises: Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items. 1) 3 Way Terminal Connector 20 Amp. 2) 3 No MCB 8 Amp. Rest of Deatils/Technical specification are as per specification in clause 24 of Annexure A

Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole Having following specs: Input: 90-240 V 50 Hz Power Factor: >0.9 Rest of Deatils/Technical specification are as per specification in clause 25 of Annexure A

Providing and installation of Junction Box with DP 32Amp MCB to serve as amin switch for LED lighting. as per specification in clause 26 of Annexure A

Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, complete as per IS specs Rest of Specification/Details are as per specification in clause 22 of Annexure A

Supply and fitting of 11 KV polymeric composite pin insulator as per details in Clause 31 of SBD

P/F of Galvanized nuts, bolts of various sizes as per site requirement.as per details in Clause 33 of SBD

P/F Danger Plate with clamps

Providing and fixing G.I Barbed wire for anti climbing/ anti climbing devices with clamps as per details in Clause 35 of SBD

Providing and Fitting of PG clamps

Providing and fitting of Galvanized stay set complete as per specification in clause 23 of Annexure A

Providing and fitting of ACSR as per IS 398 (part-2) 1996 for 50 sq.mm ACSR (Galvanised steel reinforced) for fitment of various accessories

P/F of Galvanized nuts, bolts of various sizes as per site requirement.

P/F Danger Plate with clamps

Providing and fixing G.I Barbed wire for anti climbing/ anti climbing devices with clamps

Providing and Fitting of PG clamps

Providing and fitting of Galvanized stay set complete as per details in Caluse 23 of Annexure A

TOOL KIT For Maintenance: - The Tool Kit for maintenance as per detailed specification in cluase 14 of Annexure A

Providing of good quality conveinence and utility items as per details in Caluse 15 of Annexure A

Fabrication of 7’ (L) x 6’(B) x 1.5' (H) angle iron bed for operators with back-height of 2 feet. The detailed drawing will be provided by site incharge. Rest of Deatils/Technical specification are as per clause 17 of Annexure A

Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet, 3 nos. Rest of Deatils/Technical specification are as per clause 18 of Annexure A

Providing of solar/ electrical lantern chargeable on both solar & electrical 220v supply.

Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair (01 No each)

S T ELECTRICAL ENG WORKS PEERNAR TRAL