CAMOUFLAGE PAINTING AND MISC WORK IN DOMESTIC AREA AT AF STN SURATGARH

Amount

BOQ (CAMOUFLAGE PAINTING AND MISC WORK IN DOMESTIC AREA AT AF STN SURATGARH)

Taking down cement or cement lime plaster on brick or stone walls including racking out joints/hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge

Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-Charge

M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-Charge

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge

M&L for rough cast plaster over and including 10mm thick in CM 1:4 as base coat on external surfaces of brick work finishing even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

"M&L for spray painting (by electrostatic process) over storage shed steel surface by applying two coats of synthetic enamel paint in camouflaging patterns(Multi Colour shall be used as approved) over a coat of zinc chrome primer under high pressure at 20MPA through electical pump, having nozzle dia 0.15mm to 0.2mm and max flow 1.8L to 3L per min with air hose length 10m including preparation of old steel surface including brooming down or steel wire brushing scraping down smoke soot, moulds mass ,spots and applying 1 to 1.5mm synthetic zinc oxide putty to recieve smooth finished of steel surface complete all as specified and directed. Note- Spray painting shall be carried out at storage shed in BSO yard, quoted rates shall be included for necessay scaffolding of height upto 10 m, safety belt and all other necessary T&P."

M&L for water proofing layer with Dr. Fixit primeseal external wall waterproofing as per manufacturer instruction complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of exterior acrylic emulsion (weather proof treatment) over a coat of primer, in camouflaging patterns , including preparation of new surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

M&L for painting with one coat of synthetic enamel paint on plastered surfaces including preparation of old decorated surfaces of walls/kerb stone etc complete all as specified and directed by Engineer in Charge.

M&L for painting steel surfaces exc 10cm width or girth with one coat of synthetic enamel paint of approved tint including preparation of surfaces complete all as specified and directed by Engr-in-Charge

M&L for one coat of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all specified and directed.

Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones complete all as specified and directed by Engr-in-Charge

S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n.exc 0.50sqm in each pane complete all as specified and directed by Engr-in-Charge

M&L for 25mm thick cement concrete type B0, 1:2:4 ( using 12.5mm graded aggregate) as in flooring, on roof etc, complete all as specified and directed by Engr-in-Charge

M&L 35mm thick Providing precast cement concrete type C0 1:3:6 (using 12.5mm graded aggregate) set in CM in 1:6 louvres and jallies, (measured solid), including all mouldings/pillars for supporting of jallies, complete all as specified and directed by Engr-in-Charge

Dismantling existing water storage tanks exc 500 litres but n.exc 1000 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge

S&F, Rotational moulded PVC, triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed by Engineer –in-Charge.

Excavation in post hole (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, thick watering, and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soill, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (Using 40 mm graded stone agrregate ) as in foundation filling and mass concrete work complete all as specified and directed by Engr-in-Charge

S&F mild steel for framed structure like trrussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A, complete all as specified and as directed.

S&F mild steel flat iron as in wind tie for roof including necessary drilling for securing bolts etc, complete all as specified and as directed.

S&F for pre painted galvanlume aluminium zinc coating having GI based corrugated steel sheets 0.50mm thick of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed by Engr-in-charge.

M&L 18 mm thick Medium density fibre board, exterior grade both side laminated exterior grade , fixed to timber framework as in cupboard shutters including leeping/beading fancy type with screws, complete all as specified and as directed.

S&F soft closing clip on hinge, full / half overlay type, of stainless steel, complete all as specified and as directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type anodiseed, complete all as specified and as directed.

S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises completed all as specified & directed.

M&L for heavy duty vitrified coloured paving tiles of size 300 mm X 300 mm x 9-10 mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured or white cement to match the shade of tiles, laid over 15 mm thick screed bed in CM 1:6 complete all as directed and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40 mm grade aggregate) 75 mm thick as in plinth protection / paving finished fair and even without using extra cement, complete all as specified and as directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

H S BUILDERS

DIKSHA ENTERPRISES

SRI SAI CONSTRUCTION COMPANY

M/S Shree Ram Enterprises

M/S VISHNU ENTERPRISES