Minor / miscellaneous, repairing / modification works at various buildings at premises of Central Store Tadali

CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable

Tender Inviting Authority: Staff Officer (Civil), CWS Tadali, Western Coalfields Limited

Name of work: Minor / miscellaneous, repairing / modification works at various buildings at premises of Central Store Tadali NIT no.: CWTD-CIV-E-19-2025-26

. Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder)

ITC Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.) GST to be paid by bidder (in ₹) GST to be paid by WCL (in ₹)

Name of the Bidder/ Bidding Firm / Company : Select

S. No. Item Description (Item no. 3, 36, 47, 77, & 87 are Non-SOR items; item no. 12 & 14 are based on CPWD DSR-2021 items; item no. 69 to 72 are from MJP SSR 2023-24; and remaining items are from CPWD DSR-2021) Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount in Rs. P TOTAL AMOUNT With Taxes Total amount in words

Item code 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. 0.000 cum Excess(+) Full Conversion INR INR Thirty Two Thousand Four Hundred & Four Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 0.000 cum Excess(+) Full Conversion INR INR Eight Thousand Three Hundred & Seventy Eight and Paise Fifty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Providing, cutting, & placing in position G.I. woven wire mesh of approved design (apperture, diameter of wire, & pattern) in wall cracks etc., as per instructions of the department. 0.000 kg Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 0.000 cum Excess(+) Full Conversion INR INR Six Thousand &Twenty Five and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). 0.000 cum Excess(+) Full Conversion INR INR Eight Thousand Eight Hundred & Sixty Three and Paise Twenty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). 0.000 cum Excess(+) Full Conversion INR INR Thirteen Thousand Eight Hundred & Seventy Five and Paise Thirty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 5.12 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 0.000 cum Excess(+) Full Conversion INR INR Five Thousand Nine Hundred & Eight and Paise Eighty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). 0.999 cum Excess(+) Full Conversion INR INR Forty Five Thousand Five Hundred & Sixty Seven and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 5.22.6 & 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or More. 0.000 kg Excess(+) Full Conversion INR INR One Lakh Twenty Five Thousand Seven Hundred & Thirty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers 0.000 sqm Excess(+) Full Conversion INR INR Thirty Four Thousand Six Hundred & Thirty Two Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 6.34.2 - (6.4.2 - 6.1.2) Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand). 0.000 cum Excess(+) Full Conversion INR INR Seventy Four Thousand Eight Hundred & Thirty Eight and Paise Seventy Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Based on item code 6.34.2 Brickwork with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor two level in: Cement mortar 1:6 (1 cement: 6 coarse sand). 0.000 cum Excess(+) Full Conversion INR INR Twenty Thousand Three Hundred & Seventy Four and Paise Fourteen Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 6.45.2 - (6.13.2 - 6.12.2) Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in foundations and plinth in: Cement mortar 1 : 4 (1 cement : 4 coarse sand). 0.000 sqm Excess(+) Full Conversion INR INR Fifteen Thousand Six Hundred & Eleven Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Based on item code 10.1 Structural steel work (excluding cost of steel) in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel shall be provided by WCL. 0.000 kg Excess(+) Full Conversion INR INR One Thousand One Hundred & Fifty Two Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 0.000 kg Excess(+) Full Conversion INR INR Ten Thousand Three Hundred & Fifteen Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.000 sqm Excess(+) Full Conversion INR INR One Thousand Seven Hundred & Seventy Five and Paise Seventy Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.41 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 0.000 sqm Excess(+) Full Conversion INR INR Nine Hundred & Thirty Nine and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board. 0.000 sqm Excess(+) Full Conversion INR INR Twenty Six Thousand One Hundred & Forty Two and Paise Forty Eight Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 0.000 sqm Excess(+) Full Conversion INR INR Two Thousand One Hundred & Thirty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). 0.000 sqm Excess(+) Full Conversion INR INR Sixteen Thousand Five Hundred & Fifty Seven Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.3.1 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand). 0.000 sqm Excess(+) Full Conversion INR INR Nineteen Thousand Nine Hundred & Sixty Seven and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand). 0.000 sqm Excess(+) Full Conversion INR INR One Lakh Twenty Three Thousand Nine Hundred Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). 0.000 sqm Excess(+) Full Conversion INR INR Twenty Two Thousand Five Hundred & Seventy Two and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.18 Neat cement punning. 0.000 sqm Excess(+) Full Conversion INR INR Three Thousand Two Hundred & Seventy Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 0.000 metre Excess(+) Full Conversion INR INR Eight Thousand Nine Hundred & Eighty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 0.000 cum Excess(+) Full Conversion INR INR Three Thousand Eight Hundred & Twenty Eight and Paise Seventy Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. 0.000 sqm Excess(+) Full Conversion INR INR Fifteen Thousand Four Hundred & Seventeen Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. 0.000 sqm Excess(+) Full Conversion INR INR One Thousand One Hundred & Thirty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 11.41A.1.1 (-) item code 11.42 (+) item code 11.43 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 in average 3mm thickness, including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size: Size of Tile 600 x 600 mm. 0.000 sqm Excess(+) Full Conversion INR INR Twenty Two Thousand Two Hundred & Seventy Nine Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. 0.000 sqm Excess(+) Full Conversion INR INR Twenty Seven Thousand Four Hundred & Ninety Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 11.41A.3.1 (-) item code 11.42 (+) item code 11.43 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 in average 3mm thickness, including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size: Size of Tile 600 x 600 mm. 0.000 sqm Excess(+) Full Conversion INR INR Sixteen Thousand Nine Hundred & Ninety One and Paise Twenty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 0.000 sqm Excess(+) Full Conversion INR INR Nine Thousand Four Hundred & Ninety Seven and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. 0.000 each Excess(+) Full Conversion INR INR Eight Hundred & Forty Seven and Paise Eighty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.13.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below. 0.000 each Excess(+) Full Conversion INR INR Seven Hundred & Seventy Five and Paise Twenty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 0.000 each Excess(+) Full Conversion INR INR One Thousand Six Hundred & Forty Three Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Repair/ maintenance of jammed/ damaged rolling shutters (manually operated) by taking them out, diagnosing & rectifying the problem including repairing/ replacing chain/ gears/ bearings/ nut-bolts etc. (as per requirement), oiling, greasing, and re-fixing them, while ensuring that they start functioning/ moving smoothly again. 0.000 each Excess(+) Full Conversion INR INR Seventeen Thousand One Hundred & Thirteen and Paise Thirty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 10.13.1 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 0.000 kg Excess(+) Full Conversion INR INR Four Thousand Nine Hundred & Twelve Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 0.000 sqm Excess(+) Full Conversion INR INR Ten Thousand Seven Hundred & Seventy Three and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.118.2 Providing and fixing to existing door frames. 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. 0.000 sqm Excess(+) Full Conversion INR INR Seventeen Thousand &Ninety Seven and Paise Seventy Eight Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron). 0.000 kg Excess(+) Full Conversion INR INR Eleven Thousand One Hundred & Seventy Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron). 0.000 kg Excess(+) Full Conversion INR INR Ten Thousand Five Hundred & Fifty Two Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 21.2.1 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. Brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 0.000 sqm Excess(+) Full Conversion INR INR Five Thousand Four Hundred & Nineteen and Paise Twenty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm). 0.000 sqm Excess(+) Full Conversion INR INR Nineteen Thousand Two Hundred & Seventy Eight Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 14.5.1 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 0.000 sqm Excess(+) Full Conversion INR INR Thirteen Thousand One Hundred & Twenty Two Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. 0.000 each Excess(+) Full Conversion INR INR One Thousand Five Hundred & Eighty Six Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 0.000 kg Excess(+) Full Conversion INR INR Fourteen Thousand Four Hundred & Eighty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Providing and fixing ISI marked M.S. pressed butt hinges bright finished fixed with screws on one face and welding on one face, including cost of screws, welding, etc. complete. 100x58x1.90 mm. 0.000 each Excess(+) Full Conversion INR INR One Thousand Two Hundred & Eleven and Paise Seventy Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.62.1 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm. 0.000 each Excess(+) Full Conversion INR INR One Thousand Eight Hundred & Three Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.63.2 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm. 0.000 each Excess(+) Full Conversion INR INR Five Hundred & Eighty Six Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.63.4 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 100x10 mm. 0.000 each Excess(+) Full Conversion INR INR Four Hundred & Two Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm. 0.000 each Excess(+) Full Conversion INR INR Three Hundred & Eighty Six and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.66.3 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 75 mm. 0.000 each Excess(+) Full Conversion INR INR Two Hundred & Eighty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.97.3 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm. 0.000 each Excess(+) Full Conversion INR INR Eight Hundred & Twelve Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.100.2 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm. 0.000 each Excess(+) Full Conversion INR INR Four Hundred & Seventy and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper. 0.000 each Excess(+) Full Conversion INR INR One Thousand Three Hundred & Seventeen Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. 0.000 metre Excess(+) Full Conversion INR INR Thirty and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.10.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore. 0.000 metre Excess(+) Full Conversion INR INR Three Thousand Nine Hundred & Forty One and Paise Forty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.10.2 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore. 0.000 metre Excess(+) Full Conversion INR INR Four Thousand Six Hundred & Thirty Seven and Paise Forty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.10.3 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore. 0.000 metre Excess(+) Full Conversion INR INR Two Thousand Nine Hundred & Seventy Two and Paise Ten Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.7.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work – Exposed on wall. 15 mm nominal outer dia Pipes. 0.000 metre Excess(+) Full Conversion INR INR Two Thousand Seven Hundred & Ninety Six Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.7.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work – Exposed on wall. 20 mm nominal outer dia Pipes. 0.000 metre Excess(+) Full Conversion INR INR Three Thousand Four Hundred & Forty Seven and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work – Exposed on wall. 25 mm nominal outer dia Pipes. 0.000 metre Excess(+) Full Conversion INR INR Two Thousand One Hundred & Thirty Six Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. 0.000 each Excess(+) Full Conversion INR INR One Thousand One Hundred & Fifty One and Paise Ten Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore. 0.000 each Excess(+) Full Conversion INR INR Seven Hundred & Seventy and Paise Ten Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 0.000 per litre Excess(+) Full Conversion INR INR Eight Thousand Seven Hundred & Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.54.1 Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms. 0.000 each Excess(+) Full Conversion INR INR Six Hundred & Seventy Nine and Paise Twenty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.55.1 Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. 0.000 each Excess(+) Full Conversion INR INR Six Hundred & Thirty Nine Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 15.42.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 0.000 metre Excess(+) Full Conversion INR INR Eight Hundred & Ninety Two and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 1(b)(iv), page 74 of MJP SSR 2023-24 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). One coupler and required cement solvent shall be provided with each full length pipe cost of which is included in the rate. Working Pressure 6 Kg. / Sq.cm. 110 mm. 0.000 Rmt Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 6(N), page 82 of MJP SSR 2023-24 Providing & Supply of PVC pipe specials for all class pipes. PVC Bend 6 Kg/Cm2. 110 mm. 0.000 each Excess(+) Full Conversion INR INR Seven Hundred & Thirty Two Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 6(B), page 80 of MJP SSR 2023-24 Providing & Supply of PVC pipe specials for all class pipes. Tee 6 Kg/Cm2. 110 mm. 0.000 each Excess(+) Full Conversion INR INR One Hundred & Sixty Eight Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 4(b)(iv), page 78 of MJP SSR 2023-24 Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). Working Pressure 6 to 12.5 Kg./Sq.cm. 110 mm. 0.000 Rmt Excess(+) Full Conversion INR INR One Thousand Five Hundred Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm. 0.000 each Excess(+) Full Conversion INR INR Four Thousand Six Hundred & Eighty Seven and Paise Ninety Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 17.15 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 0.000 each Excess(+) Full Conversion INR INR Two Thousand One Hundred & Eleven and Paise Sixty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 17.20.1 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid. 0.000 each Excess(+) Full Conversion INR INR One Thousand &Eighty Two and Paise Twenty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity – White. 0.000 each Excess(+) Full Conversion INR INR Three Thousand One Hundred & Sixty Eight and Paise Seventy Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Providing and fixing mirror finish C.P. brass/ stainless steel wall-mounted hand faucet/ health faucet/ hand jet of approved quality conforming to IS specifications, including the following: 1) Mirror finish C.P. brass two-way bib cock of approved quality conforming to IS specifications : 15 mm nominal bore; 2) Mirror finish metallic flexible tube upto 1.2 mtr long of approved quality conforming to IS specifications : 15 mm nominal bore; 3) Mirror finish wall hook of approved quality; and 4) Other required accessories, as required. 0.000 each Excess(+) Full Conversion INR INR Three Thousand Seven Hundred & Five and Paise Eighteen Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 17.7B Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 0.000 each Excess(+) Full Conversion INR INR Two Thousand Five Hundred & Forty Three and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 0.000 each Excess(+) Full Conversion INR INR Two Thousand Six Hundred & Ten Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore. 0.000 each Excess(+) Full Conversion INR INR Three Hundred & Forty Two and Paise Forty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia. 0.000 each Excess(+) Full Conversion INR INR Four Hundred & Five and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.58.1.1 Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 0.000 each Excess(+) Full Conversion INR INR One Hundred & Forty Three and Paise Twenty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 18.58.1.2 Providing and fixing PTMT grating of approved quality and colour. Circular type. 125 mm nominal dia with 25 mm waste hole. 0.000 each Excess(+) Full Conversion INR INR Ninety One and Paise Seventy Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.81.1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats). 0.000 sqm Excess(+) Full Conversion INR INR Seventy One Thousand One Hundred & Forty Seven and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. 0.000 sqm Excess(+) Full Conversion INR INR Forty Five Thousand Four Hundred & Twenty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.112.2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (one or more coats applied @ 0.83 ltr/10 sqm). 0.000 sqm Excess(+) Full Conversion INR INR Seventeen Thousand Four Hundred & Fifty Five and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Finishing exterior walls (vertical surfaces) with damp-proof exterior paint of approved quality, brand, and required shade at height upto two storeys: Two or more coats applied @ 3.846 litre/ 10 sqm or as per manufacturer's specification, whichever is higher. Finshing has to be of even shade and dampness/ seepage has to be stopped. 0.000 sqm Excess(+) Full Conversion INR INR One Lakh Fifty Eight Thousand Five Hundred & Seventy One Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. 0.000 sqm Excess(+) Full Conversion INR INR Eighteen Thousand Four Hundred & Forty Six Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. 0.000 sqm Excess(+) Full Conversion INR INR Two Thousand Four Hundred & Thirty Five Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. 0.000 each Excess(+) Full Conversion INR INR One Hundred & Five and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Item code 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). 0.000 cum Excess(+) Full Conversion INR INR Seven Thousand Nine Hundred & Seventy Four and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Total in Figures INR Twelve Lakh Fifty Two Thousand Seven Hundred & Sixty Two and Paise Forty Three Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Please Enable Macros to View BoQ information