Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
24 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE 861 EWS
GE 861 EWS
REPAIR TO CERTAIN B/R ASSETS AT VARIOUS LOCATIONS OF AWANTIPUR GRN UNDER AGE (P) OF GE 861 EWS
2026_MES_796599_1
GE 861 EWS-62(T)/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE 861 EWS
As per NIT
9 documents required · 9 mandatory
₹500
GE 861 EWS
₹52,000
GE 861 EWS
31 Oct 2026
31 Oct 2026
26 Nov 2026
31 Oct 2026
24 Nov 2026
16 Nov 2026
7 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material & Labour in replacement Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. | 410 | Sqm | - | - |
| 2 | Material & Labour in replacemen Pre-painted galvalume aluminium zink coating GI based Plain steel sheet .50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/Clading to wall, Ridge and eaves board, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. | 25 | Sqm | - | - |
| 3 | Demolition cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. | 39.5 | Cum | - | - |
| 4 | Material & Labour for 75 mm thick PCC 1:4:8 ,Type-D2 ,using 40mm graded stone aggregates as in sub base of flooring complete all as specified and directed by Engineer-in-Charge. | 200 | Sqm | - | - |
| 5 | Material and labour for 75 mm thick PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection / path etc. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge | 60 | Sqm | - | - |
| 6 | Material & Labour for Virified Ceramic tiles10mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured/ shade cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. | 140 | Sqm | - | - |
| 7 | Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in flooring set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. | 60 | Sqm | - | - |
| 8 | Dismantling timber scantlings 40 sq. cm in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge. | 1,190 | RM | - | - |
| 9 | Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section , clean sawn, bull nosed , splayed, chamfered or rounded on one edge or face secured with nails or brads of sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and directed by Engineer-in-Charge. | 700 | RM | - | - |
| 10 | Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section , clean sawn, bull nosed , splayed, chamfered or rounded on one edge or face secured with nails or brads of sectional areaexceeding 06 Sqcm but not exceeding 13 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge. | 1,100 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_893487.xls
BOQ • 2.78 MB
Tender62T.pdf
Tender Documents • 1.30 MB
SchofCredit62T.pdf
Additional Documents • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .