Construction of Boundary Wall and Pathway in Khanpur Park Sector Ecotech-8, Greater Noida.

Excavation in foundation in ordinary soll. (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move).SOR-20/251(a)

Cement Concrete with 4cm gauge approved ston ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SOR-20/281

M-150 Brick Work in 1:4 cement & fine sand 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. Same as item no. 305 but in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar. SOR-20/305(a)

Supply and Fixing of R.C.C. Grill work 9(JALI) of approved pattern & make at site of work in cement concrete consisting of cement, approved coarse sand and 6 mm. nominal size stone grit in the proportion of 1:2:4 & reinforced with 6 mm. dia MS. wire/bar including cutting & finishing with 1:3 cement and & fine sand of 1.25 fineness modules mortar including including supply of all materials. Labour, Tools & Plants etc, required for proper completion of the work but excluding plaster on jambs, still & soffit of the opening

50mm thick SOR-2020/Sr.no-21.17

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc, required for proper completion of the work. Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge stone ballast. SOR-20/279(a)

Providing and laying 60 mm (Grey coloured) interlocking concrete paver with 10% coloured paver as end when required as per size and shape required of 30mm grade pavement compressed in hydraulic press or vibro static machine on a prepared bed over a layer of sand 40mm thick and vibro compacted with dry sand grouting and edges closed with cement powder finish. (Coloured shall be decided by Engineer-in-charge) AR/GNIDA

12mm cement plaster of mix:

1.6 (1 cement: 6 coarse sand) DAR-18/13.4.2

Finishing walls with water proofing cement paint of required shade

New work (Two or more coats applied @ 3.84 kg/10 sqm) DSR-18/13 44.1/AR

Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat one previously painting surface including supply of all Materials, Labour, Tools & Plants etc, required for proper completion of the work, Paint to be used should conform the ISI no 105/106/133-1950

As an item (647) above but for every subsequent coat on previously treated surface SOR-2020/648

Supply of Garden Bench. Having Total Weight 70-75 KGS. Size: 5 FT Length, Having Casted Iron Sides Of Each With FRP Strips. (Full nomincule fitky) GNIDA

Labour Cess and GST will be paid extra as per govt. orders

Please Enable Macros to View BoQ information