01 - Khatauli balajipuram me gaushala road gang naher patri se gausala hote hue holi chowk tak CC road ve RCC nali ka kariya

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading & unloading but excluding stackings on pucca roads. up to 2 km Lead

1:5:10 (1 cement: 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources).

P/L RCC with cement concrete 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone III) : 3 graded aggregate nominal size 20 mm) upto plinth level

P/L RCC with cement concrete 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone III) : 3 graded aggregate nominal size 20 mm) in walls

Steel reinforcement of RCC work including streighteing, cutting, bending, placing in position & binding all complete upto plinth level. Thermo mechanically treated bars of grade Fe 500D or more.

Centring & shuttering foundation, footings & base of columns etc.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-ll (size range 53 mm to 0.075 mm) having CBR Value-25 I

Cement concrete with 2cm gauge approved stone grit, coarse sand & cement in proportion of 1:1.5:3 in cc pavment (thickness as per design) cement coarse & fine aggregate confirming to IS standred mixed in concrete mixer/plant of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed from work(steel channel) laying & fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work spreding the concrete with shovles. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion cloth for curring of concrete pavments for not less then 14 days, curing compound (Where specified) and water finishing to lines and grade includings supply of all materials, labour Tools &plants etc. required for proper completion of work and also includin complete shifting of Recron 38 fibre reinforcement materials etcl & concrete etc S.I. No. New Item 9/2025

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.