SPL REPAIR TO BLDG NO T 99 SINGLE OFFR ACCN AT 3 MTR MADGAON GOA

Amount

Dismantling asbestos cement (corrugated/semi corrugated etc) sheet including ridge in roof covering of any thickness complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick if an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality 'A', Fe-290 (Gde E- 165) complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M&L for 75 mm thick cement concrete1:3:6 type C2,using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc. complete all as specified.

Demoliation of brickwork or stone/boulder masonry, built in cement mortor including all quions, arches pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles all as specified and as directed.

M&L for laterite stone walling of squared rubble, regular coursed well bonded, bedded and solidly hearted built in cement mortor 1:6 all as specified and as directed.

M&L for laterite stone walling of squared rubble, regular coursed well bonded, bedded and solidly hearted built in cement mortor 1:6 but except stone all as specified and as directed.

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints, as specified, of squared rubble masonry regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm complete all as specifed and directed

Taking down cement plaster any description on brick or stone surface including racking out joints hacking for key scrubbing down with water etc complete.

M & L, 15 mm thick plastering in cement mortar 1:4 with WPC 3% by weight of cement, surfaces finished even and smooth without using extra cement on walls other similar work etc. all as specified and as direccted by Engr-in-Charge.Note :- Water proofing compound shall be measured & paid separately

M & L, 15 mm thick plastering in cement mortar 1:6 finished even and smooth without using extra cement on walls other similar work etc. all as specified

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed by Engr-in-charge.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of chalk whiting complete, as per manufacturer's specification, complete all as specified and directed

Material and labour for complete removal of existing treatment from old wall surfaces and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including complete removal of existing treatment complete all as specified and directed by Engr-in-charge.

Taking down chowkat with shutter including hold fast (Without taking off shutters from the frames) not exc 1.5 Sqm each.

Taking down chowkat with shutter including hold fast (Wihtout taking off shutters from the frame) exc 1.5 Sqm not exc 4 sqm each.

S&F mild steel flat iron for hold fast complete conforming to Fe-290 Gde-E-165

M&L preparing the surface of wood treating back of chowkats area tarred exc 0.1 Sqm and not exc 0.5 Sqm each.

M&L for treating small article such as hold fast

S&F second class hard wood kiln seasoned chemically treated plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete

S&F IInd class hard wood 35mm thick factory made plain framed, panelled shutter (one panel) with lock rain and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated all as splecified and directed .

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specified.

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified.

S&F for stainless steel butt hinge, size 100 mm

S&F aluminium anodized barrel tower bolt 100 mm extruded section

S&F aluminium anodized barrel tower bolt 150 mm extruded section

S&F extruded aluminium alloy handle fabricated type 150 mm.

S&F aluminium alloy , anodized , sliding door bolt with hasp , staple (bolt type ) & fixing clips of sheet , cast or extruded section & fixing bolt & sliding bolt of extruded section or cast aluminium alloy & fixing .250 mm size.

Aluminium floor door stopper 140 mm length

S&F mild steel 300 mm size, ordinary rat tail rod pattern spring including roller and roller plate complete.

Supply and fix mild steel frame & work such as grills gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, and similar work con- forming to Fe.290.Gde-E-165

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

Supply & fix in repairs Alu wire mesh 0.45 mm nominal dia of wire and width of aperature 40mm & fixed with aluminium wire staple

M&L for preparing new wooden surface & applying two coat of synthetic enamel paint over one coat of pink primer.

M&L for preparing new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer as specified and complete.

Material and labour for applying two coats of synthetic enamel paint, 10cm width or girth over a coat of red oxide primer including complete removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers of any number of coats of any width or girth to steel surfaces complete all as specified and directed.

Demolition and breaking up 100mm dia bore drain pipes (Salt glazed ware, CI, AC or Reinforced concrete) set in cement mortar

Demolition and breaking up 75mm dia bore drain pipes (Salt glazed ware, CI, AC or Reinforced concrete) set in cement mortar

S&F PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls or in floor

S&F PVC (SWR) 75 mm dia pipes single socketed in any length with rubber ring joints fixed to walls or in floor

S&F 75 mm PVC (SWR) bends any radius with provided with access door complete all as specified and directed

S&F 110 mm PVC (SWR) bends any radius with provided with access door complete all as specified and directed

M&L 75 mm dia. PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F 1000ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR part I including dismantling of old water tank.

S&Fix in rep 20 mm bore of ball brass valves, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule & fixed.

Supply and fix in rep stop valves, cast copper alloy 20 mm bore screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and complete.

S&F 20 mm bore dia Union brass to connect iron to poly-ethylene & fixed.

Taking down 15 mm GI steel tubing and connections including for refixing or removal to store.

Taking down 20 mm GI steel tubing and connections including for refixing or removal to store.

Supply and lay 15 mm UPVC pipes of pressure rating 10kgf/sq.cm with all fittings and fixed complete to walls and ceiling concealed type or laid in floor including cutting grooves in 75mm wide and 65mm deep and making good after laying of pipe in CM 1:3 complete all as spd and directed.

Supply and lay 20 mm UPVC pipes of pressure rating 10kgf/sq.cm with all fittings and fixed complete to walls and ceiling concealed type or laid in floor including cutting grooves in 75mm wide and 65mm deep and making good after laying of pipe in CM 1:3 complete all as spd and directed.

S & F for waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms.).

Supply and fix PVC flushing cistern 10 ltr capacity low level with inlet ball valve float chain and pull and brackets and flush pipe 32mm dia PVC pipe complete.

S&F PVC connection of size 15mm, 450mm long with PTMT coupling etc, complete all as specified.

Supply and fix in repairs 15mm angle stop cock chromium plated high pressure screwed down fency type fixed to iron pipe or for unions etc complte all as spd

Supply & Fix in repair brass cast copper alloy CP Shower rose 125mm size with shower Arm 15mm size 195 mm long with bend

Supply & Fix in repairs towel rails 60 cm long brass chromium plated 20mm dia with brackets fixed to walls in repairs

Supply and fixing of soap dish vitreous china coloured approximate size (160mm x 160mm x 90mm) fixed in repairs.

S & F in repair pillar taps, fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long body screwed shanks and fly nuts screwed for iron pipe of bore 15mm.

S&F in repair 15mm bore Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Dismantling of ceiling boards any thickness including cover fillets.

Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified directed.

Material and labour for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed. (Note:- Aluminium frame work s considerd under item no 9 above)

Supply and fixed Wall mixer with provision of overhead shower with 115mm long bend pipe on upper side, connceting legs & wall Flangness. Cart Part No CON- 273KNUPR Jaguar.

Supply and fixed Two Way Bib Cock with wall flange. Cart Part No CON-041KN Jaguar.

M&L for CP Health Faucet including all necessary fitting, complete all as spd and directed by the Engr-in-Charge

S&F in repair curtain rail,harrison rails, anoluminium alloy powder coated fency type with fixing brackets, stops, rollers etc.

Supply and fixed 15mm CPVC pipe for Hot & Cold water supply as per IS :15778 , SDR 11, pressure bearing capacity @230C is 28.12kg/cm2 and @820C 7.03kg/cm2

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site as directed.

Taking down UNSV sub main wiring of any size make, type and capacity and depositing at site as directed.

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC FRLS conduit (medium grade) Concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) incl Sunken Iron Boxes / pressed steel modular terminal boxes any size/module, concealed on walls and fixed by means of brass screws incl modular cover plates and cover frame any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories incl making good of wall surface by cementing / plastering, applying wall putty incl 02 coats of distempering in disturbed surface with existing colour all as specified and directed complete all as specified and directed at site for the following:- .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision)

(a) One light point / Fan point ,Bell point controlled by one, one-way switch,

(b) One switch socket outlet 3 pin 5 Amps, on Same board

(c) One switch socket outlet 2/3 pin 5 Amps, on Independent board.

All as per item No 80 above but with 4 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 4 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed.

Supply and fixing including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing including connection modular Switch socket combination 2 in 1,6 pin 16 amps 3 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing including connection modular Switch socket combination 2 in 1,5 pin 5 amps 3 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

S&F Ceiling rose surface bakelite 65x50mm two to three terminal complete all as specified and directed. Make : SSK/Havells/Plaza.

Material and Labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Supply and fixing modular Bell push 6A 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

S&F Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells.

Supply and fixing of Modular Fan regulator,120 watts as directed and specified by Engineer-in-charge. (Make : Crabtree/Cona/Havells)

Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with efficiency of 120 lm/W ,decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed.

S&F LED Batten Tube Light light fittings 10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed.Make: Bajaj/ CG/Havells

S&F of LED lamp 15 Watt including all connected fixing accessories complete all as specified and directed by Engr-in-charge.

S&F LED Building security light fitting 35 Watt, new generation, energy saving and environmental friendly, long life LED street light made up of pressure die-cast housing with prisma as tic polycarbonate modular secondary lense optic for city road lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08. 4KV inbuild surge protection of capacity LED including all accessories complete all as specified and as directed by Engr-in-charge. Make: Havells/ Bajaj/ Phillips/ Wipro.

M&L for Bracket made out of GI pipe 40 mm dia medium grade, 1.2 meter long bent to shape fixed with MS flat irom clamps made out of 40mm x 6 mm thick, nuts bolts complete all as specified and directed.

S&F Bedside wall mounted light fittings with 7 watt lamp (ISI marked) complete all as specified and directed. Make: Bajaj/ Havells/ CG or equivalent as approved by GE

Supply and Fixing load line DB Double door including dismantelling of existing panel of wall and fixing new load line box and doing the existing connection in new load line with SP ,SPN ,TPN ( SP ,SPN ,TPN measured and paid separetely) with plaster and necessary bricks, cement required at site and matching the existing surface with colour including in unit rate as specified and directed. Make: Havells/ L&T/ Legrand/Schnieder

S&F IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. Make: Havells/ L&T/ Legrand/ Schneider

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and Neutral (SPN) and current carrying capacity 32 Amp complete with connection testing and commissioning all as specified and directed by Engr-in-charge. Make: Havells/ L&T/ Legrand/ Schneider

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole (SP) and current carrying capacity 6-32 Amp complete with connection testing and commissioning all as specified and directed by Engr-in-charge. Make: Havells/ L&T/ Legrand/ Schneider

S&F Isolator TPN 415 Volt 63 Amps all as specified and directed. Make: Havells/ L&T/ Legrand/ Schneider

S&F GI tubing light grade for protection of cable fixed in wall or laid in trenches complete including taking down old unserviceable GI tubing of 80mm bore protection of cable all as specified and directed.

Disconnecting electrical wire from ceiling rose, taking down ceiling fan of any type/size and make, removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning (including replacement of worn-out / unserviceable like capacitor, connector, canopy, bearing, down road, PVC cable etc) assembling the repaired ceiling fan including painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint complete including testing hanging the ceiling fan as its own position, connection with point wiring complete all as directed by Engineer-in-Charge. (NOTE : Spare parts to be replaced shall be measured and paid separately as supply only items was labour element involes for replacement of spare parts shall deemed to be included in the unit rate quoted by the tenderer).

All as per item No. 102 here in before but for exhaust fan 300 mm/380 mm sweep.

Supply only ball bearing of any size and type suitable for any type / make / size of ceiling fan .

All as per item No.104 above but for exhaust fan of any type/make and size (300 /380 mm sweep) .

Supply only capacitor 230 Volts AC 50 HZ and rated capacity 2.5 MFD for ceiling fan.

Supply only capacitor 230V AC 50 HZ and rated capacity 3.15 MFD for exhaust fan.

S&F PVC insulated, sheathed twin twisted stranded copper conductor flexible cable of size 1.5 Sqmm for ceiling fan as specified and directed.

M&L for making opening/hole suitable for fixing exhaust fan 200/300mm sweep including wooden bedding for fixing of exhaust fan and plastering finishing and making good the existing surface complete all as directed.

Taking out geyser of any make and capacity for necessary maintenance/ repair/ replacement including refixing the same in original position after repair if necessary including one coat of white synthetic enamel paint and making good of distrubed surface with existing complete all as specified. (NOTE : spare parts shall be paid separately under supply only rate)

Supply only PVC connection pipes inner wiremesh type 15mm size of length 450mm hot and cold with both ended brass flare nuts for geyser connection. (Make:Prayag/Marc/Jaquar)

Supply only Thermostat with auto cut for setting temperature 0- 90C.

Supply only heating element thread/push type as per existing size & shape of capacity 1.5 KW complete all as specified and directed including taking out of unserviceable one .

Supply only geyser apparatus assembly for 25 ltrs capacity chromium coated as per existing size and shape including replacement of stud bolt, nut, washer etc. and rubber gasket complete all as directed.

Material and labour for concealed sub main wiring with two single core PVC-FRLSH insulated unsheathed stranded copper conductor cable of size 6 Sqmm fixed/ drawn through and including heavy duty PVC conduit with accessories with one single core PVC-FRLSH insulated unsheathed stranded copper conductor cable of size 6 Sqmm as a continuous earth wire complete all as specified and directed. Note: Two single core cables and one run of earth copper conductor/ conduit will be measured and paid as one unit length.

Description all as per item No 115 above but for 4 sqmm PVC FRLSH copper conductor cable

Description all as per item No 115 above but for 2.5 sqmm PVC FRLSH copper conductor cable

Description all as per item No 115 above but for 1.5 sqmm PVC FRLSH copper conductor cable

M&L for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991) all as specified and directed by Engr-in-Charge.

Manik Constructions (BID ID -3301275)

Sagar Constructions (BID ID -3307904)

R.R.Construction.Co (BID ID -3302075)