REPAIRS TO ROOF SHEET, FLOORING, PLASTERING, PLUMBING WORKS, STEEL CB AND OTHER ASSOCIATED WORKS IN OTM AND MD ACCN IN AREA-III AT KAMPTEE

Amount

Taking down door frame with shutter (without taking of shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door frame with shutter (without taking of shutter from the frame) area exc 1.5 sqm but not exceeding 4 sqm complete all as specified and directed.

S&F 0.63mm thick mild steel, plain black sheet covering to door chowkats (frames); cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified and directed.

S&F 0.80mm thick mild steel, plain black sheet covering to door chowkats (frames); cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified and directed.

S&F 1.00mm thick mild steel, plain black sheet covering to door chowkats (frames); cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified and directed.

S&F mild steel TMT round bars 10mm dia and over, cut to length bent to shape as required, including cranking, bending spirally for locking arrangement of door conforming to Fe- 410-W (Gde E-250) or Fe-290 ( Gde E-165) ll complete all as specified and directed.

S&F 75mm long butt hinges, medium weight, cold rolled mild steel and fixed/ welded to frame complete all as specified and directed.

S&F mild steel mortice lock 4 levers, vertical type, size 75mm complete all as specified and directed.

S&F mild steel drawer handles flush drop (5 to 75mm grip) on 4 screw plate, including letting in complete all as specified and directed.

M&L for preaparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding, but not backing complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface of size 300x 450x 6-7mm thick, set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick, area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed or bedding layers of cement mortar 1:6 for laying of floor finishes complete all as specified and directed.

All as per item No 14 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, cooking platforms etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick laid over and including 15mm thick cement screed bed or bedding layer in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No 17 above but as in risers, steps, skirting, dado and pillar including 10mm thick backing coat in CM 1:3 etc complete all as specified and directed.

M&L for machine cut cudappa stone slab 20-25mm thick over 15mm thick cement screed base laid in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the likes in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repair pillar taps of 15mm dia, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut, screwed for iron pipes complete all as specified and directed.

S&F in repairs stop valve/ angle cock of 15mm dia, cast copper alloy, chromium plated, fancy type, high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specified and directed.

All as per item No 22 above but concealed type complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan Orissa pattern 580 x 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc including making good to floor complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white, including coupling, waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F in repairs chromium plated shower rose, with or without swivel joints of 75mm dia including fixing to 15mm bore pipe complete all as specified and directed. Make:- Prayag Cat No 481 or equivalent.

S&F in repair health faucet of 15mm bore, brass, chromium plated including PVC pipe to connection GI tubing of 15mm bore complete all as specified and directed. Make:- Prayag Cat No BEA-90 or equivalent.

S&F in repair towel rail of brass, chromium plated with glossy finish complete all as specified and directed. Make:- Prayag Cat No BA-01 or equivalent.

S&F in repairs bib tap 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs bib tap 15mm dia, cast copper alloy, chromium plated with crutch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia bib tap of PTMT, any colour, high pressure, screwed for iron pipe (Minimum weight 15mm - 90 gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure, screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair corrugated waste pipe of size 40x 800mm for kitchen sink and wash basin etc complete all as specified and directed. Make:- Prayag Cat No 328 or equivalent.

S&F in repairs soap dish, PTMT, fixed to plugs with chromium plated brass screws complete all as specified and directed. Make:- Prayag Cat No 195 or equivalent.

S&F in repairs drapery rod Harrison rails with internal dia 25mm, mild steel, chromium plated with fancy type fixing brackets, stops rollers etc complete all as specified and as directed.

S&F 15mm bore GI tubing, medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F 20mm bore GI tubing, medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 ltr capacity, hoisted and fixed in position including PTMT ball valve 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltr capacity, hoisted and fixed in position including PTMT ball valve 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 ltr capacity, hoisted and fixed in position including PTMT ball valve 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

S&F in repairs 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210 Gms) complete all as specified and directed.

All as per item No 46 above but 25mm bore complete all as specified and directed.

S&F sinks with drainage board made of stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm including waste pipe of 32mm dia complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of over all size 780 x 600 x 250mm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen complete all as specified and directed. Make:- Prayag cat part No P-340 or equivalent in Bluestar.

S&F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window / ventilators shutters complete all as specified and directed.

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridges, velly gutter, cladding to wall, etc made to shape as required and fixed with J hooks or screwed complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ blankets of any thickness, including cover fillets complete all as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595 x 595 x 4mm fixed or laid/inserted to GI frame work with screws/clips as in ceiling, laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.3mm thick of size 24x24mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.3mm thick with height 32mm and cross approx 1200mm centre to centre with GI cleat and steel expansion fasterners, including drilling holes for 4mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations complete all as specified and directed. Notes:- (i) Ceiling baords shall be measured separately. (ii) The grid system shall be as per specification of make as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillar but excluding ashalar facing etc complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster including roots of trees and trees of any girth, desription on brick or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:6, finished fair and even complete all as specified and directed.

M&L for preparation of plastered surfaces of wall & applying three coats of white wash complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.28,220.00]

M/s T.S.JOHAR

M/s B S Jain

NORTH INDIA PEST CONTROL

M/S J.A CHAWHAN

M/s DS Khekde

M/s M.G. Hargunani

Bidder Name

M/S J.A CHAWHAN

M/s T.S.JOHAR

M/s B S Jain

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL