34/EUDC(RB)/LESA/2025-26

Amount

Safe carriage loading unloading with proper stacking of following material from ESC Daliganj to JE dump store.

11/0.4 kv 250 KVA New Transformer

11 mtr long ST pole

11 kv pin insulator polymeric type

LT ABC (all Size)

11 kv disc insulator polymeric type

LT pvc cable 1x400 sqmm

PCC pole 8.5 mter long

3 phase LT Distribution Box with Clamp

LT XLPE CABLE 3.5x400/240 SQMM

11kv 3x185/120/70 sqmm xlpe cable

11 KV End Termination O/Door & I/Door 3x185/120/70 sqmm

11 KV ST/TH C/J KIT 3x185/120/70 sqmm

Top Channel

Dropper Channel

S/S Base angle

T-off Channel

Safe carriage loading unloading with proper stacking of following material from JE dump store to work site.

11/0.4 kv 250 KVA New Transformer

11 mtr long ST pole

11 kv pin insulator polymeric type

LT ABC (all Size)

1 kv disc insulator polymeric type

LT pvc cable 1x400 sqmm

PCC pole 8.5 mter long

3 phase LT Distribution Box with Clamp

LT XLPE CABLE 3.5x400/240 SQMM

11kv 3x185/120/70 sqmm xlpe cable

11 KV End Termination O/Door & I/Door 3x185/120/70 sqmm

11 KV ST/TH C/J KIT 3x185/120/70 sqmm

Top Channel

Dropper Channel

S/S Base angle

T-off Channel

Concreting of PCC/ST pole

providing and fixing 11 kv DO fuse set (pin insulator provided by deptt)

providing and fixing MS Channel

providing and fixing MS Angle

Erection of LT ABC (all type)

providing and fixing of syntex type fuse unit (i/c-01,o/g-02)

fixing of 3 phase LT Distribution Box

providing and fixing of copper L/piece For 250/400 kva tf

providing and fixing of GI clamp of different type for PCC/ST pole

providing and fixing of alu lug size of 240 sqmm

plinth for syntex type fuse unit with proper size

Fabrication & erection of S/S type double pole for 11KV line on 11 M long ST pole or 8.5 mtr PCC pole with fixing of necessary clamps & other acessories like 1 no. top channel 100×50 mm,2 no.MS angle 65x65x6mm,danger board,number plate,barbed wire,TPMO set & D.O.fuse set

Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cemend sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed.Rest wall should be 0.23 mtr thick.brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be fiilled from the ground level up to 15 centimeter below from the top of wall,Cement,sand & brick Ballasts should be filled up to 15 centimeter.Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The t/fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor .)

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 400 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required matrial for above job shall be provided by contractor except T/Fs)

Construction of retaining wall, fabrication & erection of Wire mesh fencing around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

single Cable laying in HDPE pipe 4" dia (All the material required for laying will be supplied by the contractor except Cable)

11kv 3x185/120/70 sqmm xlpe Double ckt Cable laying in normal soil by digging of trench 900 mm deep, 500 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/neutral earthing (Earthing rod & earthing strip arranged by contractor).

Fixing of earth rod (2500x20mm) as per norms. For earthing support of old existing poles of LT lines including 6 SWG GI/Earth wire . (All Materials provided by contractor)

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moistur retaining capacity. (Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

hoisting , winding and jumpering of LT cable 3.5x400/240 or 1x630/400/240 sqmm

hoisting of 11 kv xlpe cable 3x185/120/70 sqmm

Making of 11 kv Cable Stand For 250 kva Transformer

11 KV End Termination O/Door & I/Door 3x185/120/70 sqmm

All taxess as applicable shall be paid time to time extra

S.M.ENTERPRISES (BID ID -5530945)

P.S. ENTERPRISES (BID ID -5531043)