E1-4493-2025-08-Erode City Municipal Corporation

Amount

Dismantling the Existing damaged Pressed tiles & Weathering course including clearing materials away from the site and all labour charges etc complete.

Clean removal of cement plaster from walls surface including clearing materials away from the site and all labour charges etc complete.

Dismantling the existing damaged brick/stone masonry wall in cement mortor Up to 3M height including clearing away from the site and all labour charges etc complete .

Dismantling the existing damaged Reinorced cement concrete Up to 3M height including clearing away from the site and all labour charges etc complete .

Dismantling the existing damaged Plain cement concrete Up to 3M height including clearing away from the site and all labour charges etc complete .

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification .

Plain cement concrete 1:4:8 mix (One cement four sand and eight aggricate) using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc complete.

centering for sides and soffits of R.C.C.works such as lintels, slab that beams plain surface etc., complete excluding strutting upto 3.30 M height using mild steel sheet of size 90 c.m x 60 c.m and 10 gauge stifer with M.S. angles of size 25 mm x 25 mm x 3mm laid over silver w.c.wood joints of size 10 c.m. x 6 c.m. spaced at about 90 c.m. c/c and supported by casurins props of 10 c.m. to 13 c.m. dia spaced 75 c.m. centre to centre complying with as per standard specification

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Supplying and fabrication placing in position of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification - 1 Qtl

Brick work in cement mortar 1:5 (One cement and five sand) mix using country bricks 23cmx11cmx7cm of best quality including cost and conveyance of all materials and labour etc, complete.

Ceiling Plastering with cement mortar 1:3 (One cement and three sand) mix 10mm thick including cost of all materials and labour including curing charges complete as per standard specification

Plastering with cement mortar 1:5 (One cement and five sand) mix 12mm thick including cost of all materials and labour including curing charges complete as per standard specification

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Supplying and laying of Interlocking Paver Block Stone 60mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,

Providing and filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc., complete.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Solid PVC Door Shutters using 19 Gauge 19mm MSsquare tubes for styles and outer frames. 15mm MSsquare tubes for top, lock and bottom rails. The steeltubes shall be covered with 5mm thick solid PVCSheets. Shutter using 5mm thick solid PVC Sheets forpanelling shall rigidly fixed in position includingnecessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of toprail, lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm withsuitable rabate for housing the shutter

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Painting two coats with approved quality of plastic emulsion paint over the existing wall surface including cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed Sc Cu. Conductor of 1100 Vgrade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T.switch in flush with wall, covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (For electronic regulator) (SD-17)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point(SD-37)

Wiring with 2X 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable pipe on wall and ceiling with PVC accessories with 150mmX 100mm X 63mm TW switch box for 15 A 3 pin non interlocking wall socket with 15 A flush type switch with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.(SD-39)

Supply and run of 4 of 10 sqmm (101 / 0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25 mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains(SD-369)

Supply and run of 2 of 2.5 sq mm (28/0.3) PVC insulated SC unsheathed Cu.conductor of 1100v Grade in suitable PVC rigid pipe with continuous earth wire connection of 14 SWG TC wire and painting of suitable colour.(SD-336)

Supply and fixing of fan Step Regulator 100W - 2 Module of approved quality including std specifications etc complete.

Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(SD-449)

Supply and fixing of single box type 4'36W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting(SD-87)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1meter down rod on the existing clamp(SD-107)

Supply and fixing of 10 kA 6A-32A double pole MCB of approved quality including std specifications etc complete

Supply and fixing of 10 kA 40A four pole MCB of approved quality including std specifications etc complete

Supply and fixing of Sheet Steel Enclosure for MCB's of approved quality including std specifications etc complete

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB, 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.(SD-577)

Supply, fabrication, delivery and commissioning of plate earthing made of GI Flat and GI Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers

Supply, delivery, installation and commissioning of single phase in and single phase out UPS of capacity 3 KVA for a backup of 1 hour.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supply and delivery of PVC Pipe and G.I Pipes Specials approuved quality of departmental officers loading, unloading Cost and conveyance of all materials to Site etc., Complete.

4" PVC pipe

4" PVC Elbow

4" PVC Tee

4" PVC Aircowl

1" PVC pipe

1" PVC Elbow

1" PVC Tee

1"X3/4" PVC Reducer elbow

6" PVC pipe

6" PVC Door Elbow

8" PVC pipe

Laying and Jointing the following PVC Pipes and GI pipes and Specials with proper gradient and test for all labour charges etc., Complete.

4" PVC pipe

1" PVC pipe

6" PVC pipe

8" PVC pipe

VETRI CONSTRUCTIO (BID ID -1481792)