Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 LAccepted-AOC A 63 ELDECO COUNTY PHASE II RAJGARH JHANSI U P 284135 | JHANSI | JHANSI | UTTAR PRADESH | 284135 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹29.3 L+₹2.0 L (7.21%)Rejected-Finance 01 NEAR GOVERMENT HOSPITAL KOTHI BAZAR ROAD KOTHI SATNA MADHYA PRADESH 485666 | SATNA | MADHYA PRADESH | 485666 | L2 | Rejected-Finance Not become lowest bidder | |
| 3 | L3₹29.9 L+₹2.6 L (9.67%)Rejected-Finance 840 1B MADHUR VIHAR COLONY CIVIL LINES JHANSI UP 284 001 | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-Finance Not become lowest bidder | |
| 4 | L4₹30.3 L+₹3.0 L (11.1%)Rejected-Finance BUNGLOW NO 75 CAVALRY ROAD JHANSI CANTT PIN 280001 | JHANSI | JHANSI | UTTAR PRADESH | 280001 | L4 | Rejected-Finance Not become lowest bidder | |
| 5 | L5₹30.8 L+₹3.5 L (12.9%)Rejected-Finance | L5 | Rejected-Finance Not become lowest bidder |
| Sl No | Description | Qty | Unit | Dhruv Enterprises L5 | M/s Sohanil Construction L6 | JAI BALAJI CONSTRUCTIONS L7 | ROHIT ENTERPRISES L1 | M/S Kumar Contractors L3 | m/s ramesh saran agarwal L4 | M/S BIGBEST CONSTRUCTION L8 | ADARSH ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Attending daily complaints of Jhansi Mil area by deputing adequate number of Skilled teams of qualified Electrician and helper round the clock for repair, maintenance and making the continuity of electric supply. After rectifying the defects of the electrical system by replacing the U/S items such as switches, sockets, distribution boards, MCB light/power , lamp holders-bracket/ pendent/ batten, bell/ buzzer , push button, ceiling rose, capacitors and other similar nature of works , light & power plug, ceiling fan and geyser including provisioning of small pieces of electrical cables PVC insulated copper multistranded conductor of sizes 1.5 Sqmm to 6 Sqmm single core and length not increasing 0.50 mtrs complete all as specified and directed by Engr-in-Charge. (Complaint slip shall be part of the bill) as per directed by Engr-in Charge.
Note:- (i) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge.
(ii) This item pertains to attending complaints of light/fan/power point, MCB DB including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge.
(iii) Items shall be measured and paid seperately under respective item of Sch 'A'
(iv) Electrician and helder report to E/M Yard on daily basis. | 4,500 | Each Job | 90 ₹4,05,000 | 85 ₹3,82,500 | 100 ₹4,50,000 | 65 ₹2,92,500 | 80 ₹3,60,000 | 50 ₹2,25,000 Lowest | 99 ₹4,45,500 | 80 ₹3,60,000 |
| 2.00 | Supply and fix in replacement fan capacitor 2.5 m.f.d for ceiling Fan, incl taking down old unserveable capacitor all as specified and directed. | 500 | Each | 40 ₹20,000 | 35 ₹17,500 | 40 ₹20,000 | 30 ₹15,000 | 15 ₹7,500 Lowest | 20 ₹10,000 | 35 ₹17,500 | 25 ₹12,500 |
| 3.00 | Supply and fix in replacement fan capacitor 4 m.f.d for Exhaust Fan,incl taking down old unserveable all as specified and directed. | 125 | Each | 60 ₹7,500 | 35 ₹4,375 | 50 ₹6,250 | 30 ₹3,750 | 18 ₹2,250 Lowest | 25 ₹3,125 | 40 ₹5,000 | 30 ₹3,750 |
| 4.00 | Taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete of any description wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. | 1,696 | Point | 20 ₹33,920 | 15 ₹25,440 | 5 ₹8,480 | 20 ₹33,920 | 5 ₹8,480 | 5 ₹8,480 | 150 ₹2,54,400 | 2 ₹3,392 Lowest |
| 5.00M&L for Point wiring with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of elctrogalvanised seel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed for the following points:- | |||||||||||
| 5.01 | One light / ceiling fan / exhaust fan / call bell point controlled by one switch | 680 | Point | 300 ₹2,04,000 | 245 ₹1,66,600 Lowest | 350 ₹2,38,000 | 320 ₹2,17,600 | 350 ₹2,38,000 | 280 ₹1,90,400 | 350 ₹2,38,000 | 320 ₹2,17,600 |
| 5.02 | One 6A socket point controlled by one switch on independent board | 230 | Point | 200 ₹46,000 Lowest | 245 ₹56,350 | 350 ₹80,500 | 320 ₹73,600 | 360 ₹82,800 | 300 ₹69,000 | 350 ₹80,500 | 320 ₹73,600 |
| 5.03 | One 6A socket point controlled by one switch on same board | 180 | Point | 170 ₹30,600 | 125 ₹22,500 | 250 ₹45,000 | 130 ₹23,400 | 180 ₹32,400 | 180 ₹32,400 | 350 ₹63,000 | 100 ₹18,000 Lowest |
| 5.04 | All as per item No. 5.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. | 40 | Point | 400 ₹16,000 | 495 ₹19,800 | 600 ₹24,000 | 460 ₹18,400 | 400 ₹16,000 | 400 ₹16,000 | 350 ₹14,000 Lowest | 425 ₹17,000 |
| 5.05 | All as per srl item No 5 here-in-before but with 4 sq mm FRLSH copper wire with 4 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board. | 20 | Point | 450 ₹9,000 | 995 ₹19,900 | 800 ₹16,000 | 500 ₹10,000 | 430 ₹8,600 | 420 ₹8,400 | 350 ₹7,000 Lowest | 550 ₹11,000 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
2 Oct 2025, 6:00 pmClosed
Maj Rajesh Rathore
Garrison Engineer Jhansi
PETTY REPAIRS PERTAINS TO E/M WORKS IN ZONE C AND D UNDER AGE E/M AT GE JHANSI
2025_MES_729476_1
GE/JHA/TOK/72 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE Jhansi
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Jhansi
₹1 L
Yes
2 Dec 2025
4 Sept 2025
4 Oct 2025
4 Sept 2025
2 Oct 2025
18 Sept 2025
4 Sept 2025 - 17 Sept 2025
Amount
Attending daily complaints of Jhansi Mil area by deputing adequate number of Skilled teams of qualified Electrician and helper round the clock for repair, maintenance and making the continuity of electric supply. After rectifying the defects of the electrical system by replacing the U/S items such as switches, sockets, distribution boards, MCB light/power , lamp holders-bracket/ pendent/ batten, bell/ buzzer , push button, ceiling rose, capacitors and other similar nature of works , light & power plug, ceiling fan and geyser including provisioning of small pieces of electrical cables PVC insulated copper multistranded conductor of sizes 1.5 Sqmm to 6 Sqmm single core and length not increasing 0.50 mtrs complete all as specified and directed by Engr-in-Charge. (Complaint slip shall be part of the bill) as per directed by Engr-in Charge. Note:- (i) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge. (ii) This item pertains to attending complaints of light/fan/power point, MCB DB including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge. (iii) Items shall be measured and paid seperately under respective item of Sch 'A' (iv) Electrician and helder report to E/M Yard on daily basis.
Supply and fix in replacement fan capacitor 2.5 m.f.d for ceiling Fan, incl taking down old unserveable capacitor all as specified and directed.
Supply and fix in replacement fan capacitor 4 m.f.d for Exhaust Fan,incl taking down old unserveable all as specified and directed.
Taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete of any description wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.
M&L for Point wiring with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of elctrogalvanised seel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed for the following points:-
One light / ceiling fan / exhaust fan / call bell point controlled by one switch
One 6A socket point controlled by one switch on independent board
One 6A socket point controlled by one switch on same board
All as per item No. 5.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.
All as per srl item No 5 here-in-before but with 4 sq mm FRLSH copper wire with 4 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.
All as per item No. 5.00 here-in-before but with 2.5 Sqmm one 16A socket point controlled by one 16A switch on independent board but just below / above the existing socket points / DBs up to one meter distance in the same vertical plane.
M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of modular electrogalvanised steel terminal boxes, cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLSH) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :-
One light / ceiling fan / exhaust fan / call bell point controlled by one switch
One 6A socket point controlled by one switch on independent board
One 6A socket point controlled by one switch on same board
All as per item No. 6.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.
All as per srl item No. 6.00 here-in-before but with 4 sq mm FRLSH copper wire with 4 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.
All as per item No. 6.00 here-in-before but with 2.5 Sqmm one 16A socket point controlled by one 16A switch on independent board but just below / above the existing socket points / DBs up to one meter distance in the same vertical plane.
M&L for sub main wiring along with earth wire with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete including taking down old sub main wiring of any description all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)
2 runs X 2.5 Sqmm + 1 run X 2.5 Sqmm.
2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)
2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)
2runs x 10 sqmm(Ph & N) + 1run x 10 sqmm(earth wire)
M&L for sub main wiring along with earth wire with FRLSH insulated copper conductor, single core cable drawn through in & incl PVC trunking of size not less than 32x12mm ISI marked ivory white and its all accessories complete incl taking down old submain wiring of any description all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)
2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)
2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)
Notes for item No. 5.00 to 8.02: (i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion.
S&F of Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.
S&F of Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.
S&F of electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed.
S&F of Socket 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.
S&F of Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed.
S&F of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.
S&F of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed.
S&F of Modular fan regulator step type in 5 steps, 240V, 50Hz complete all as specified and directed.
S&F of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.
S&F of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.
S&F of Modular blank plate 1 module complete all as specified and directed.
S&F of call bell ding dong, AC, 240V, 50Hz complete all as specified and directed.
S&F of Modular Bell Push , flush type, 6Amp, 1 module 50Hz complete all as specified and directed.
S&F of Bell Push , flush type, 5 Amp 50Hz complete all as specified and directed.
S&F of Lamp holder, angle type with metal ring, PVC/Polycarbonate body complete all as specified and directed.
S&F of Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.
Note for Item No. 10 to 25 If these items are required to be fixed in replacement the taking down element shall be deemed to be included in the quoted rates.
S&F of integrated LED batten 10 watt, 2 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.
S&F of integrated LED batten 20 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.
S&F of integrated LED batten 20 watt, 4 feet long, Tri light (cool white, warm white & Morning white) combination of these in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.
S&F of LED bulkhead luminaire 10W in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection complete all as specified and directed by Engineer-in-Charge.
S&F of LED street/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed.
S&F of LED street/security light fitting 45 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed.
S&F of LED post top lantern light fitting 20watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv and complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP65 degree of protection including provision of 25mm dia medium grade GI pipe of length 0.50m bent to required shape and fixing on ground/walls with pcc 1:2:4 using 20 mm size stone aggregate upto 30 cm and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed.
S&F of sleek round recessed cum surface mounting LED down light 12 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation complete all as specified and directed.
S&F of Decorative wall light fixture made up of Polycarbonate with and including 7W retrofit LED lamp, full white/ Warm white of approved model complete all as specified and directed.
S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type (Cool white & warm white) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling/grid ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge.
S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type (Cool white & warm white) gypsum ceiling with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge.
S&F of LED Step Bollard light having step profile placed on top ideal for architectural outdoor lighting typically giving off light from the sides suitable to illuminate walkways, steps or pathway with rated power 10 W cat ref LLGBL-10-W or eqivalent complete all as specified and directed.
S&F of Edge Recess round panel ultra slim recess -mounting round LED downlighter light 6 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation complete all as specified and directed.
S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
S&F of modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed.
Supply and fix MCB distribution board, SPN, 12 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including taking out old MCB DB, cutting the wall surfaces for flush mounting of DB all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely.
All as per item No. 42 here-in-before but SPN, 8 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.
All as per item No. 42 here-in-before but SPN, 4way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.
S&F of MCB 63A, 10 KA, TPN, 415 V, 50 Hz complete all as specified and directed.
S&F of MCB 40A, 10 KA, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed.
S&F of MCB 6 - 32A, 10 KA, single Pole, 'C' curve, 240 V, 50 Hz complete all as specified and directed.
Supply and fixing in repairs of ventilating fan with plastic body with louvers, 200mm sweep, single phase, 230 volts, 50 Hz. Complete all as specified and directed.
Supply and fixing in repairs of ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. Complete all as specified and directed.
S&F in replacement of 3mm thick phenolic laminated hylam sheet of size 9" X 11" including necessary cutting, drilling holes for fixing of switches, sockets & fan regulators etc and fixing the hylam sheet on existing metal flush box with brass/GI screws with washers complete all as specified and directed. Note: S&F of switches, sockets & regulators shall be measured and paid separately.
S&F in replacement of 3mm thick phenolic laminated hylam sheet of size 8" X 5" including necessary cutting and drilling holes for fixing of switches, sockets & fan regulators etc as per site requirement and fixing the hylam sheet on existing metal flush box with new brass/GI screws with washers complete all as specified and directed. Note: S&F of switches, sockets & regulators shall be measured and paid separately.
Supply and fix in replacement of 3mm thick phenolic laminated hylam sheet of size 5" X 5" including necessary cutting and drilling holes for fixing of switches, sockets & fan regulators etc as per site requirement and fixing the hylam sheet on existing metal flush box with new brass/GI screws with washers complete all as specified and directed by Engineer-in-Charge. Note: S&F of switches, sockets & regulators shall be measured and paid separately.
Supply and fix of 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor twin core, 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections including connecting on LT OH line / energy meter / DB etc complete including taking out old cable of any description all as specified and directed.
Supply and fixing in replacement PVC conduit including fitting such as tee,elbow,bend etc 20mm dia ISI (MMS)grade, incl taking down old unserviceable conduit all as specified and directed.
Supply and fixing in replacement PVC cassing Capping tee,elbow,bend etc 20/25 mm dia ISI ISI (MMS) incl taking down old unservecable cassing capping all as specified and directed.
Supply and fixing in replacement modular cover plate with frame 4 module type for fixing of modular switch socket, regulators, blank plates etc incl dismantling old unserviceable cover plate complete all as specified and directed.
Supply and fixing in replacement modular cover plate with frame 8 module type for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed.
Supply and fixing in replacement PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit incl taking down old UNSV cable, complete all as specified and directed.
Supply and fixing in replacement PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed.
Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed.
Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 6.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable. complete all as specified and directed.
S & F Street light bracket made out of medium grade GI Pipe, bent to shape including GI Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting and taking down old UNSV GI Bracket all as specified and directed by Engr-in Charge.
M & L in replacement GLS Coloured Lamp Red,Green,Milky,0-60 Watt Make Philps/Havells/WIPRO
S & F in replacement LED Bulb threaded types in holders 0 to 15 Watts as per existing sample given by department Make Havells/Wipro/Legarnd
Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store for repair and refixing in same position including connector from ceiling rose to fan connector complete.
Taking down exhaust fan and refixing and connecting up including provision of cable from ceiling rose to connector to fan
ADARSH ENTERPRISES (BID ID -3433888)
M/S Kumar Contractors (BID ID -3440871)
m/s ramesh saran agarwal (BID ID -3441060)
Dhruv Enterprises (BID ID -3430922)
M/s Sohanil Construction (BID ID -3433287)
JAI BALAJI CONSTRUCTIONS (BID ID -3435694)
M/S BIGBEST CONSTRUCTION (BID ID -3435092)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .