REPAIR TO PLASTERING, TILING, AND FLOORING AND OTHER MISC B/R WORKS IN OTM AND GARAGES IN E1 AND E2 AND COMPREHENSIVE MAINT

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F in repair for stainless steel wire cloth 0.25 to 0.36mm nominal dia of wire and avg width of aperture 1.4mm to 2mm and fixed complete all as specified and as directed.

S&F for stainless steel wire cloth 0.25 to 0.36mm nominal dia of wire and avg width of aperture 1.4mm to 2mm and fixed complete all as specified and as directed.

M&L for 30 mm thick flush shutter with solid core construction with block board core and plywood face panels , commercial type on both sides members of shutters, covered decorative on both face veneer with liping/frame to match as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkats complete all as specified and as directed.

S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Pressed steel frame for doors of size 125 X 60mm frabicated out & 1.25mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F Pressed steel frame for doors of size 105 X 60mm fabricated out & 1.25mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F 35mm thick factory made solid PVC moulded door shutter with particle board core with 5mm thick PVC prelaminated moulded sheet on the front face and 5 mm thick PVC plain colour sheet on back face complete all as specified directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drg in SSR Part II 2010 complete all as specified and as directed.

S&F 30mm thick factory made solid PVC moulded door shutter with particle board core with 5mm thick PVC moulded sheet on the front face and 5 mm thick PVC plain colour sheet on back face complete all as specified directed.

S & F in repairs powder coated aluminium window using 63mm x 38mm x 1.6mm chowkhats with 48mm x48mm x 1.6mm openable section as in shutter including ornamental aluminum grill of size 50x50mm with 0.36mm dia wirecloth/5.5mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100mm-02 Nos, tower bolts-100mm- 02 Nos Hooks and eyes -02 Nos 150mm Butt hinges 100mm 04 Nos etc complete all as specified and directed.

S&F power coated aluminium anodised door frame and shutter of section as under and providing 5.50mm thick tinted gass/stainless steel wire cloth 0.25 to 0.36mm nominal dia of wire and avg width of aperture 1.4mm to 2mmwith aluminium grill and incl all fittings such as aluminum butthinges 100mm-2Nos, Aluminum handles 150mm-02Nos, Alu frame bolts 150mm- 02Nos, rubber -bedding/socket, glazing clips and one lock fourlever with duplicate keys of make Godrej or equivalent and 01 Nos hydrolic door glass etc complete including Taking down old Aluminium door shutter with chaukhat. (a) Outer Frame - 100x50x1.20mm (b) Shutter - 90x50x1.20mm (c) Top, middle & Bottom rail 90x50x1.20mm etc

M&L for in repair to aluminium door/window of any size/any description , taking off from present position and refixing in the same position after tightening , easing/change the section as required , including fitting the rubber packing aluminium snap beading resetting floor/hydraulic door closer/spring etc complete all as specified and directed.

S&F in repairs powder coated aluminum partition using 95.6mmx 44.8mm x 1.00-1.2mm frame work with 12mm thick exterior grade veneered particle board with decorative veneers on both face/5.5mm thick frosted glass including aluminum beading for fixing board each panel n.exc 1.2 Sqm complete all as specified and directed.

S & F in repair door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and as directed.

S&F 150mm long stainless steel barrel tower bolts complete all as specified and directed.

S&F 150mm long stainless steel handle complete all as specified and directed.

S&F 300mm stainles steel sliding door bolts, bolt type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all asspd and directed.

S&F in repairs Aliminium anodised Door stoper 140mm long complete all as specified and directed.

S&F in repairs tower bolt Aluminum anodised of 125 mm long complete all as specified and as directed.

S&F in repairs tower bolt Aluminum anodised of 200 mm long complete all as specified and as directed.

S&F in in repair Aluminium sliding bolt of any description and type of size 300mm long complete all as specified and as directed.

S&F in repair Aluminium handles fabricated type anodised of size 125mm long complete all as specified and as directed.

S&F for CP curtain rods 20mm dia with fixing with decorative CP brackets, holders etc fixed complete all as specified and as directed.

S & F repair 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and as directed.

S&F for double action floor spring hydraulically regululated made up of minimum 1.25mm thick aluminum sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repairs peg set of three of stainless steel bright finished, fixed complete all as specified and as directed.

S&F mild steel door seal for doors upto 1000mm long and thickness not less then 1mm complete all as specified and directed.

S&F in repairs stack clamps out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75mm bore pipes complete all as specified and as directed.

S&F in repairs stack clamps out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100mm bore pipes complete all as specified and as directed.

S&F for factory made window/ventilator steel rolled framed section of 1 to 1.25mm thick made of galvanized steel, box type hollow , Hollow P Sec incl grill made of 10mm Sq MS bars welded to 12mm x 6mm, MS flat @ 150mm c/c. Grill shall be welded to window frame. The complete unit Ref TD/2013/01 sheet 1/3 to 3/3 shall be a shop coat of zink chromate primer including the following :-. (a) Fly proof shutter shall provided with stainless steel 32mm gauge fly mesh of 304 Gde FE with 144 holes per square mesh. Glazed shutter and fixed glass portion shall be provided with glass of 4mm thick float glass. (b) Window frame shall be fixed to brick wall with by cutting holes and made good dismantled portion in PCC (1:2:4) type B1 four Nos hold fast block for each window/ventilator :- (i) Hold fast 150mm long of 20x3mm MS flat made to shape 4 Nos per window. (ii) Handle of Z Sec 20mm x 25mm, 100mm long – 1 No per leaf. (iii) Mild Steel tower bolt 150mm long - 02 Nos per leaf. (iv) Z Section 20mm x 25mm, 100mm long stopper - 1 No per leaf.

S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and as directed.

All as per item No. 33 above but without glazing bars

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in panes n.exc. 0.5 sqm each pane incl hacking out old glass panes complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in panes n.exc. 0.5 sqm each pane incl hacking out old glass panes complete all as specified and as directed.

S&F tinted glass 4.8 mm thick in glazing to aluminium door, window & partition including pad, gasket complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and as directed.

M&L Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,40 mm thick , as as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with bituminous compound grade 'A' complete all as specified and directed.

M&L PCC 75mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0(using 12.5 mm grd agg) in floors as sub base for floor finishing complete all as specified and as directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and as directed.

Dismantling of stone slab of any description of thickness in floors & aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Non skid Ceramic coloured joint free tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match incl and over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl and over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick of size 600X600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortor 1:6 for layiong floor finishes. complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 15mm thick plaster in cement mortar (1:4) complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.

M&L for vitrified tiles 10mm thick (Square/rectangular) polished area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match incl and over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for vitrified paving tiles (any colour) of size 30cm x 30cm x 10mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 15mm screed bedding in cement mortar (1:4) complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for Shelves (veneering to wall) incl 12mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over 20 mm thick screed bed in CM 1:3 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Kota stone slab 18-20mm thick ( One piece) in riser of steps, skirting, dado and pillar laid over 20mm thick backing coat in CM 1:4 cement screed base laid cement screed and jointed complete all as specified and as directed.

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks complete all as specified and as directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement external surface using water proofing compound complete all as specified and directed, height upto G+2 Story Bldg. Note: Qty for water proofing chemical will be measured saperately.

M & L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement.internal surface complete all as specified and directed.

M&L for Rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified.incl two coat cement base paint / Appex /white wash as required to match the existing surface complete all as specified and as directed. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor.

M&L rendering 5 mm thick on ceiling surfaces in CM 1:4 finished even and fair complete all as specified and as directed.

Supply only Liquid water proofing compound of complete all as specified and as directed.

Supplying and applying, SmartCare Damp Block 2K, two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster. complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .

S & F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. GI (up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long etc and Incl providing and fixing coloured designer Board (everest artescape) 4 mm thick in ceiling fixed with screw as per manufacturer's instructions complete all as spd and as directed.

S&F GI lay in metal ceiling system of 600 x 600mm module which includes provides and fixing 'C' wall angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm c/c , suspending the main main C carrier os size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34 mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm c/c with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm(both side inclusive, fixing with clip in tiles into spring T with :- (a) GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

(b) GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5 electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

S&F hollow corrugated shape PVC wall lining consisting of 5 mm thick decorative colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

Taking up or down steel tubing and connections ,15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified and directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F in repair for 15mm bib tap long body standard of PTMT any colour screwed for iron pipe and fixed.(minimum weight 90 gm) complete all as specified and as directed.

S & F in repair for 15mm angle/stop cock standard of PTMT any colour screwed for iron pipe and fixed.(minimum weight 90 gm) complete all as specified and as directed.

S & F in repair 20mm dia PTMT ball valve high ressure with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.

S & F in repair 2 way 15mm bib cock standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair for 15mm angle cock standard of PTMT any colour screwed for iron pipe and fixed.(minimum weight 90 gm) complete all as specified and as directed.

S & F in repair for 15mm Pillar tap fancy type standard of PTMT any colour screwed for iron pipe and fixed.(minimum weight 110 gm) complete all as specified and as directed.

S & F in repair 15mm dia PTMT ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F in repair 20mm dia PTMT ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F in repair 15mm bore long body CP chromium plated bib tap cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fix complete.(minimum weight 350 gm) complete all as specified and as directed.

S&F 15mm bore in repair CP pillar taps Fancy type cast copper alloy along screwed down high pressure with hot & cold with long screwed shanks and fly nuts screwed for GI pipe. (minimum weight 350 gm) complete all as specified and as directed.

S&F in repair 2 way angle cock/stop cock 15mm CP fancy type 15 mm bore high pressure screwed for iron pipe complete.(minimum weight 350 gm) complete all as specified and as directed.

S&F in repair CP angle / stop cock fancy type 15 mm bore high pressure screwed for iron pipe complete.(minimum weight 350 gm) complete all as specified and as directed.

S&F in repair 15mm stop cock (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe (chromium plated) complete all as specified and as directed.

S&F in repair CP Jet spary butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.

S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.

S&F 15mm bore in repair CP pillar taps (swan neck with long shank) Fancy type cast copper alloy along screwed down high pressure with hot & cold with long screwed shanks and fly nuts screwed for GI pipe. (minimum weight 350 gm) complete all as specified and as directed.

S&F of washers/brass splindle in bib tap/Pillar tap/angle valve/stop cock/concealed cock of any pattern of size 15mm to 20mm bore complete all as specified and as directed.

S&F in repairs 32mm bore waste fittings chromium plated for sinks, basins with long shanks and fly nuts, flange and bedded in red cement and fixed complete all as specified and as directed.

S&F in repairs 40mm bore waste fittings chromium plated for sinks, basins with long shanks and fly nuts, flange and bedded in red cement and fixed complete all as specified and as directed.

S&F PVC waste pipe 32mm dia of length 0.8m to 0.9m fixed complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

M&L 100mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F for 100mm CI pipes soil, Bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.

All as per item No 100 above but with oval access doors

S&F for 100mm CI pipes soil,Branch pieces, single T (double), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

All as per item No 102 above but with oval access doors

M&L for Bands, straps, supports or stays, for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

M&L 75mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F for 75mm CI pipes soil, Bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.

All as per item No 106 above but with oval access doors

S&F for 75mm CI pipes soil,Branch pieces, single T (double), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

All as per item No 108 above but with oval access doors

S & F in repair of PVC connection pipe 15 mm size with nuts, washers of length 600 mm pipe complete all as specified and directed.

S & F in repair of PVC connection pipe 15 mm size with nuts, washers of length 450 mm pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including taps waste chain and plug but including bracket complete all as specified and directed.

S&F in repair stainless steel kitchen sink 1 mm thick kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

All as per item No. 113 above but with drain board of overall size 915 mm x460 mm bowl size 410 mm x330 mm x 160 mm.

S & F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket,complete all as specified and directed.

S & F in repair vitreous china was down, water closet pan (Orrisa pattern), long pan of size 580 x 440 mm white with 'P' or 'S' trap with integral foot rests, any pattern, including connection to trap and to flushing pipe, anti syphonage pipe including making good to floor ete complete all as specified and directed.

S & F in repair vitreous china was down, water closet pan (pedrestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F PVC EWC seat cover of any type & make for peddestal pan complete all as specified and directed.

S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 100 mm size complete all as specified and directed.

S&F in repairs vitreous china urinal, Half stall type, white incl CP spreader screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixinf discharge pipr, flush pipe, grating and union for discharge complete all as specified and directed.

S&F in repairs vitreous china urinal, bowl type, white incl CP spreader screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixinf discharge pipr, flush pipe, grating and union for discharge complete all as specified and directed.

S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long complete all as specified and directed.

S& F in repair 18 mm thick Alstone Hybrid Water Proofing Board in cupboard shutter with decorative on one side & other side balancing white fixed by drilling screws complete all as specified and directed.

S&F in repair PVC Syphon kit assembly in existing flushtank complete all as specified and directed.

S&F PVC mirror cabinet size 350X450mm of standard size complete all as specified and directed.

S&F in repair Glass shelf 450mm long x 100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed.

S&F in repair corner glass shelf of size 300X300 mm including brackets fixed to wall with pvc sleeves and stainless steel screw complete all as specified and directed.

S&F in repair stainless steel grating 100mm bore size fixed with white cement complete all as specified and directed.

Labour only for disconnecting existing water tank, setting asides for repair after removing all scale and dirf etc from tanks and mouth and reconnecting and re-fixing in position of capacity exceeding 500 ltr and n.exc. 1000 ltrs in all necessary GI fittings for re-fixings as socket/tank nipple etc (including writing with white paint date of cleaning) complete all as specified and directed.

All as per item No. 129 above but exc 250 ltr n.exc 500 ltr.

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including dismantling water tank and remove to store of 500 Ltr capacity complete all as specified and directed.

All as per item No. 131 above but 750 Ltr capacity

All as per item No. 131 above but 1000 Ltr capacity

S&F in repair PVC cover for PVC Water tank 500/750/1000ltr cap with self locking arrangement fixed with 4 Nos GI nut and bolt complete all as specified and directed.

S&F in repair 110mm bore PVC SWR bends of any radius door complete all as specified and directed.

S&F in repair 75mm bore PVC SWR bends of any radius door complete all as specified and directed.

S&F in repair 110mm bore SWR junction, single T equal or unequal with access door complete all as specified and directed.

S&F in repair 75mm bore SWR junction, single T equal or unequal with access door complete all as specified and directed.

S&F in repair 110mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type pipe complete all as specified and directed.

S&F in repair 75mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type pipe complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of cement base paint , white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bond distemper white or tinted over preparatory to oil bound distempering Chalk whitening preparatory to oil bound distempering complete all as specified and directed.

M&L for three coats of white wash on ceiling including preparation of new plaster surface complete all as specified and directed.

M&L for preparation of old painted surface and applying one coat of exterior emulsion APEX of Dark Shade complete all as specified and directed.

M & L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of oil bound distemper oil emulsion white or tinted on walls including wall care putty to wall to achieve smoth finish to wall etc complete all as specified and as directed.

M & L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of cement based paint on walls etc complete all as specified and as directed.

M&L for applying two coat of synthetic enameled paint over a coat of red oxide primer of any girth including preparation of new steel complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of frames etc. complete all as specified and as directed.

Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders, pendants, sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and as directed.

M&L for point wiring for light/fan etc complete with 2.5sqmm single core FRLSH ISI marked PVC insulated cable with multi stranded copper conductor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for concealed conduit as directed at site including chase cutting for one light/fan point controlled by one switch including MS sheet sunken box concealed in wall duly painted inside with one coat of red oxide primer and two coats of black bituminous paint in out side with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 1.5 sqmm multi stranded FRLSH, PVC insulated copper cable as continuous earth connected to comman earth and earth dolly including making good the disturbed surfaces complete all as specified and directed.

All as per item No 150.00 above but for one light point controlled by two way switches.

All as per item No 150.00 above but for one 3 pin socket outlet 5amps point controlled by one push button on independent board.

All as per item No 150.00 above but for one 3 pin socket outlet 5amps point controlled by one switch on the same board with other switches.

M&L for point wiring for power/15 Amp socket with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.22 mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire connected to comen earth and earth dolly including making good the disturbed surfaces complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.

M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 4.0 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire connected to comen earth and earth dolly including making good the disturbed surfacescomplete for one socket 20 Amp socket outlet controlled by one switch on independent board complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 25mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring and making good disturbed surfaces complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit ISI marked 32mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring and making good the disturbed surfaces complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length complete all as specified and directed.

S&F in replacement of switch piano flush button single pole, one way 5 Amp 240 Volt complete all as specified and directed.

S&F in replacement of switch piano flush button single pole, one way 16 Amp 240 Volt complete all as specified and directed.

S&F in replacement of switch piano flush button single pole, two way 5 Amp 240 Volt complete all as specified and directed.

S&F in replacement of socket 5 amps 5 pin flush type , 230 volts complete all as specified and directed.

S&F in replacement of socket out let ,6 pin 5 and 15 amps multi purpose 2 in 1 flush type 230 volt complete all as specified and directed.

S&F in replacement of sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of any cap from 10 to 20 A all as required at site or directed complete all as specified and directed.

S&F in replacement of ceiling rose 63 x 30 mm three terminal, polycorbonate body complete all as specified and directed.

S&F in replacement of fan regulator electronic 5 stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically all as required complete all as specified and directed.

S&F in replacement of Angle/ battan holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

S&F in replacement of LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S&F in replacement of surface and wall mounted 20 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F in replacement of 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

S&F in replacement of surface and wall mounted 10 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F in repair building security light of 30Watt energy saving & environmental friendly long life LED steet light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having IP65 protection and impact resistance of IK07 and electronic driver and all other fixing accessories complete all as specified and directed.

S&F in replacement of LED of 36W Watt 6000K slim panel IP40 2' x 2' LED panel for recessed (armstrong/grid ceiling) dust-free installation with high brightness LEDs for glare-free homogenous illumination with driver and all other connected accessories complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement of MCB Triple pole & neutral, 240 Volts, 63 amps breaking capacity 10KA (type 'C') complete all as specified and directed.

S&F in replacement of MCB SPN 240 volts, 32 Amps 10KA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB SPN 240 volts, 63 Amps, 10KA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB single pole 240 volt any rating from 6 to 32 amps , B series with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.

Supply and fixing in replacement of burnt ceiling fans with BLDC fan, 1200 mm complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 220 Cum/min with service value not less than 8.4, five star rated with brushless direct current motor as specified and directed.

Supply and fixing in replacement of Exhaust fan metallic body of size 300 mm sweep, 50 Hz, AC 240Volt, 900 RPM, dynamically balanced impellers for smooth & vibration free operation, pre-lubricated double ball bearing for maintenance free running with aerodynamically designed & balanced blade, air delivery 1275 Cum/hr, noise level 40dB- 45dB and power consumption (50 W±10%) heavy duty single phase supply including mild steel louvers complete all as specified and directed.

S & F in replacement of worn out MCCB with MCCB 160 Amp 36 KA ,4 pole,Ics=100% Icu,thermal adjustable-0.8 to 1 In,Magnetc Adjustment 5 to 10 In,Adjustable sensitivity :0.03-0.3-1-3 A, Adjustable tripping: 0-0.3-1-3s.-02 Each complete all as specified and directed.

Supply & Fixing in replacement of worn out MCB 100 Amp 4 Pole with MCB 100 Amp 4 Pole Breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S & F in replacement of worn out fan capacitor with capacitor of capacity 2.5 MFD 440 volt complete all as specified and directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 4" x 4" including screws for fixing complete all as specified and directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 7" x 4" including screws for fixing complete all as specified and directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 8" x 10" including screws for fixing complete all as specified and directed.

S & F in replacement of worn out hylum sheet with Hylum sheet 3 mm thick of size 11" x 5" including screws for fixing complete all as specified and directed.

S & F in replacement of worn out sunkan box with Sunkan Box GI 1.22 mm thick of size 4" x 4" duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint including cutting chasing and PCC work, plastering and making good the disturbed surface and matching with existing by white wash/distemper complete all as specified and directed.

S & F in replacement of worn out sunkan box with Sunkan Box GI 1.22 mm thick of size 7" x 4" duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint including cutting chasing and PCC work, plastering and making good the disturbed surface and matching with existing by white wash/distemper complete all as specified and directed.

S & F in replacement of worn out sunkan box with Sunkan Box GI 1.22 mm thick of size 8" x 10" duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint including cutting chasing and PCC work, plastering and making good the disturbed surface and matching with existing by white wash/distemper complete all as specified and directed.

S & F in replacement of worn out flexible wire with twin core flexible wire of size 40/0.0076 complete all as specified and directed.

S & F in replacement of worn out flexible wire with twin core flexible wire of size 23/0.0076 complete all as specified and directed.

S & F in replacement of worn out copper cable with PVC insulated, FRLS, unsheathed single core, multistranded copper conductor industrial cable 1.5 Sqmm complete all as specified and directed.

S & F in replacement of worn out copper cable with PVC insulated, FRLS, unsheathed single core, multistranded copper conductor industrial cable 2.5 Sqmm complete all as specified and directed.

M/S MAMTA CONSTRUCTIONS

A N BUILDERS

AHMED CONSTRUCTIONS

B S ENTERPRISES