REPAIR/REPLACEMENT OF OLD RUSTED LT DISTRIBUTION PANELS AND FEEDER PILLAR BOX INCLUDING OTHER CONNECTED WORKS AT AF STN BKT

Amount

Taking down Old existing LT panel board/ LT feeder pillar box complete with MCCB & switch fuse unit of any capacity and size including bus bars, ammeters, voltmeters etc after disconnecting all cable connection complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate 600 x 600 x 6mm thick buired directly in ground (earth pit not less that 2.25mtr deep below ground level ) with top edge of the plate not less than 1.5mr below normal ground level connected to galvanised iron strip of size 25 x 3mm by means GI welding after tightening of bolts, nuts, check nuts and washers from earth pit to test point with protection GI pipe of size 40mm dia light grade and providing masonry enclosure and watering pipe of dia 40mm medium grade including wiremesh steel funnel, including watering arrangement 200 ltrs for each earth pit including necessary earth work for earthing pit, disposal of surplus soil to a distance not exc 50 meter complete as specifed and directed. Make of GI Pipe:- TATA/JINDAL/ZENITH (ISI Marked). (Note : GI strip and G.I pipe 40 mm protection pipe 7.5 mtr length from earth pit to test point watering pipe & earth work is included in the quoted rate)

Excavation in trenches in any type of soil n.exc 1.5m wide and not exc 1.5m in depth and getting out for cable etc all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25cm in thickness in any type of soil all as specified and directed.

Removing of excavated surplus material (SOIL) to a distance not exc 50m and depositing where directed at a level n. exc 1.5m above starting point complete all as specified and directed.

Supply & Laying brick covering as mechanical protection to cables with well burnt sub class ‘B’ old size bricks all as specified and directed.

M&L for dry sand cushioning to underground cable provided with a layer of 8cm deep before laying the cable and 15cm deep after laying the cable and stretching the cable all as specified and directed. Note:- Punned thickness of sand after compaction shall be measured for the purpose of payment.

M&L for XLPE insulated , armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade cross sectional area 120 sqmm ,3.5 core , laying on surface of wall / trenches / pipes all as per site requirement complete with connecting acessories all as specified and directed.Make:- Grandlay/Finolex/RPG (Asian)/RR Kable.

M&L for XLPE insulated , armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade cross sectional area 240 sqmm ,3.5 core , laying on surface of wall / trenches / pipes all as per site requirement complete with connecting acessories all as specified and directed.Make:- Grandlay/Finolex/RPG (Asian)/RR Kable.

Industrial Traders

SB Singh and co.

Unnati Engineers