Providing and Fixing of Chain Link Fencing, Sign Boards (4 Nos) and Const. of Chowkidar Quarter of New Industrial Estate at Village Salwah, Tehsil Mendhar Distt.Poonch.

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared

Earth work in bulk excavation by manual means over areas (exceeding 30cmin depth,1.5m in width as well as 10m2 on plan) including disposal of excavated earth as directed by Engineer in-charge.All kinds of soil

Earth work in excavation in pot holes all kinds of soils

Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering curing and all carriages complete. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 crushed stone aggregate 40 mm nominal size) complete job

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 crushed stone aggregate 20 mm nominal size) including all carriages complete job

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing M.S galvanised steel mesh including jointing and bolting complete mesh size 50mm X 50mm in panel sizes 2.50 mtr x 1.80 mtr as directed by the Engineer in Charge

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing MS steel 14 guage sheet including welding complete

Painting with synthetic enamel paint including providing and fixing of refractor computerized work on sign boards complete job as directed by I/c Engineer

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto floor level 1 with: 1:1½:3 (1 cement :1½ coarse sand: 3 crushed stone aggregate 20 mm nominal size) including all carriages complete job

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 crushed stone aggregate 20 mm nominal size) including all carriages complete job

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages complete job

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 including curing in : Cement mortar 1:3 ( 1 cement : 3 coarse sand) including all carriages complete job

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown all carriages complete job

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 ( miniumum thickness 5 mm ) of approved make in all colours, shades except begundy, bottle green, black of any size skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 and jointing with grey cement slurry including all carriages complete job

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm including all carriages complete job

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level TMT Bars

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) including all carriages complete job

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) including all carriages complete job

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) including all carriages complete job

Colour washing such as green blue or buff to give an even shade washing with lime

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 kg/10sqm)

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including all carriages complete job

Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation With machine moulded Common burnt clay (Non modular) brick tiles of class designation 12.5 conforming to IS: 2690

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings 1/C fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Concealed work including cutting chases and making good the walls etc.)

15mm nominal outer dia pipes.

20mm nominal outer dia pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license] C.P. BRASS FITTINGS

Providing and fixing PVC rain water pipes including all fittings complete job 110 mm dia

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design inside size 60 x60 cm and 45 cm deep including CI cover with frame complete job

Providing and fixing PVC floor trap complete job

Providing and fixing of following CP fittings complete job (Jaquar / Hindware / Kerovit)

CP bras bib cock

CP brass angle valve

Towel Ring

Soap dish holder

Tank Nipple Change over

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C.I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipaldesign complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend (Jaquar / Hindware / Kerovit)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively (Jaquar / Hindware / Kerovit)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (Jaquar / Hindware / Kerovit)

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length (ISI)

Providing and fixing of looking mirror of size 450mm x 600mm

Providing and fixing kitchen sink with C. I. brackets, C.P brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm (ISI)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. (ISI)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required(Make: Anchor/Havells/KEI/Vguard) (ISI)

2 x 2.5 sq. mm Metre

2 x 4 sq. mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (Havells/Anchor/crabtree) (ISI)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (Havells/Anchor/legrand/orient) (ISI)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (ISI)

Supplying and fixing PVC batten/ angle holder including connections etc. as required (ISI).

Supply, Installation ,Testing and Commissioning of 09 watt LED Bulb in existing angle holder including pvc round sheets.(Make: Panasonic/ Havells/Crompton) (ISI)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remainingaccessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Make: Orient/Panasonic/Havells/Crompton) (ISI)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (ISI)

Single pole

Double pole

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Make: Anchor/ Havells/ Crabtree /legrand) (ISI)

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)(Make: Anchor/ Hipower/ Havells) (ISI)

Supply of pre-wired Wall /Ceiling Mounted 4 ft. integrated LED Light Fitting(20W) including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and earthing, etc as required.( Make: Panasonic/ Crompton/ havells) (ISI)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (ISI)

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 400mm sweep (ISI)

Supply of exhaust fan- with louvers in the existing opening, including making good the damage, connection, etc. as required. Upto 400mm sweep(Make: Usha/Crompton/Havells) (ISI)

M/S MOHD IQBAL SHAH

M/S Masood Ahmed

SHIV RATTAN SINGH