Loading
Loading…
Loading…
Tender Value
₹3.4 Cr
EMD Value
₹6.9 L
Closing Date
7 Sept 2026, 2:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
OA/3
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: Advance Correction Slip No. 1) Ref: 2022/ce- i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: Financial Eligibility Criteria: Advance Correction Slip No. 1) Ref: 2022/ce-i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: The tenderers shall submit requisite information as per Annexure-XIV (as per tender document & NIT), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work : Any civil engineering work
16 conditions · 4 needing a document upload
A . Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. 1. The details of the works completed by the tenderer during the last Seven years to be filled in Annexure-I. 2. The details of Plants and Machinery with the tenderer to be filled in Annexure- II. 3. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III. 4. Details of Works presently on hand of the Tenderer to be filled in Annexure- IV. 5. The details regarding Association of Railway Officer s with the tenderer to be filled in Annexure- V. 6. List of the Arbitration cases of the Tenderer during last Five years to be filled in Annexure-VI. 7. List of the Court cases of the Tenderer during last Five years to be filled in Annexure- VII. 8. NEFT MANDATE FORM. All Payments to the agency including the refund of the Earnest Money of the unsuccessful bidder preferably will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII. 9.Format for Certificate to be uploaded by Tenderer Along with the tender documents Annexure-IX and IX-A (As per GCC-2022 Annexure-V and V-A). 10. GST COMPLAINT INVOICE Annexure-X 11. LETTER OF CREDIT Annexure-XI, 12. Bid Capacity Declaration Annexure-XII.13. Bid Security declaration Annexure-XIII and 14. Annual Contractual Turnover Data Declaration Annexure-XIV (As per GCC-2022 Annexure-VI-B).
B . T h e tender offer complete in a l l respect and with all documents is t o b e submitted online by e-tendering process through the website www.ireps.gov.in before the closing time/date of this tender as mentioned in the NIT (Notice Inviting Tender). Tenderer can revise the bids any number of times till the closing time/date of the tender. No manual offers shall be accepted.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Provision of Track Machine siding (EI-1 no.) at PTAE & (PI-4 nos.) at GPAE,JIT, DTAE & NDAE under AEN/NDAE the Jurisdiction of Sr.DEN/3/HWH.
199_2026-27~ER
199_2026-27
Open
Works - General
10 Months
Howrah, West Bengal
₹0
₹6.9 L
14 Aug 2026
14 Aug 2026
24 Aug 2026
643 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 32,55,289.5 | ||
| — | 480.00 | — | — | ||
| Drilling holes for sinking of Tube well of 200 X 150 mm dia by reverse /direct rotary ring method in all shorts of soil except rock including supply of all tool and plants complete in all respect. | — | — | — | 6,33,744 | |
| — | 240.00 | — | — | ||
| S + F +F and Lowering 200 mm dia ERWMS 7 mm th. Plain ended pipe including welding of joints and painting with blank bituminous paint and also packing sides of pipe and bore hole with clay. | — | — | — | 8,43,664.8 | |
| — | 140.00 | — | — | ||
| S + F +F and Lowering 150 mm dia ERWMS 7 mm th. Plain ended pipe including welding of joints and painting with blank bituminous paint and also packing sides of pipe and bore hole | — | — | — | 2,98,214 | |
| — | 5.00 | — | — | ||
| S + F +F and lowering 200 X 150 mm dia reducer . | — | — | — | 7,803.2 | |
| — | 120.00 | — | — | ||
| Supplying and laying of 150 mm nominal dia fibreglass reinforced epoxy resin strainer of 6 mm thick wall thickness . | — | — | — | 4,89,574.8 | |
| — | 38.00 | — | — | ||
| 6 mm th. Gravel paking in the annular space in between the bore hole and the tubewell assembling including suppling of washed pea sized gravel should conform to IS : 4097-1967 . | — | — | — | 64,619.76 | |
| — | 5.00 | — | — | ||
| S + F + F all accessories , Tap cap bottom plug cetre guide etc. | — | — | — | 71,405.75 | |
| — | 38.00 | — | — | ||
| Development of yeild test of tube well by using heavy duty turbine pump . | — | — | — | 2,09,567.34 | |
| — | 5.00 | — | — | ||
| Test boring with 40mm dia pipe up to the depth as per instruction of Engineer at site complete | — | — | — | 1,88,181.15 | |
| — | 75.00 | — | — | ||
| — | 3565.00 | — | — | ||
| Filling of ballast, sand, stone dust into cement bag and placing spreading the same as per direction of site in charge. The rate includes all lead, lift, descend, ascend etc complete in all respect. | — | — | — | 82,993.2 | |
| — | — | — | 74,92,714.4 | ||
| — | 123.00 | — | — | ||
| Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site using 20mm graded crushed stone aggregate and coarse sand of approved quality in jacketing of piers and abutments from bottom of foundation up to a height of 10m for designed thickness of jacketing including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be paid extra under relevant item. 2. Plasticizer shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticisers at the stage of Mix Design and in that case deduction shall be made as per relevant item. | — | — | — | 6,14,639.61 | |
| — | 147.00 | — | — | ||
| Dewatering of natural or accumulated water from any location. Payment to be done for Horse power of pump multiplied by pumping hours. | — | — | — | 6,610.59 | |
| — | 30.00 | — | — | ||
| Providing and laying Pitching with Stone Boulders, weighing not less than 35kg each with voids filled with spalls on slopes, laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical Specifications (filter media to be paid separately under the relevant item). | — | — | — | 55,930.2 | |
| — | 30.00 | — | — | ||
| Supply and laying of coarse sand including consolidation with all labour, lead, lift, tools, plants, crossing of tracks as per drawing and technical specification as directed by the Engineer in charge in case loose slush is encountered at site of foundation before casting the foundation or laying the filtering media. | — | — | — | 31,232.4 | |
| — | 30.00 | — | — | ||
| Providing and laying Filter Material as per RDSO Specifications underneath pitching in slopes complete as per drawing and Technical Specification. | — | — | — | 84,857.4 | |
| — | 155.00 | — | — | ||
| Providing and inserting nipples of size 12 to 20 mm dia. with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary after completion of grouting. | — | — | — | 11,663.75 | |
| — | 155.00 | — | — | ||
| Grouting of masonry/concrete by injection process duly Sealing of cracks, through nipples complete as per Technical Specification and procedure given in IRBM Para No 209 including necessary admixture. Payment shall be as per use of cement by weight in case of neat cement/cement mortar grouting and weight of Epoxy in case of Epoxy Grouting. (Cement will be paid extra). Neat Cement Grout with 20% anti shrinkage compound w.r.t. cement. | — | — | — | 62,144.15 | |
| — | 60.00 | — | — | ||
| Supply and using Cement at Worksite Ordinary Portland Cement 53 grade of approved brands/makes | — | — | — | 4,61,170.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Modified-GCC2026March_compressed1.pdf
ATTACHMENT
AnnexureV-GCC1.pdf
ATTACHMENT
specialconditionsiding27.pdf
ATTACHMENT
JPOSTCables_1.pdf
ATTACHMENT
LetterregardingrecommendedlistofBrands_makeofmaterialsdated03.09.2025.pdf
ATTACHMENT
Updatedtenderdocument_151.pdf
ATTACHMENT
GCCACS14.07.2022-compressed.pdf
ATTACHMENT
CheckList_3.pdf
ATTACHMENT
Annexure-X2.pdf
ATTACHMENT
NewAnnexure-IX-merged.pdf
ATTACHMENT
Annexure-XII_.pdf
ATTACHMENT
ColouredFinal_GCC_April-22_pdf_27.04.22_1.pdf
ATTACHMENT
Annexure-XI_11_2.pdf
ATTACHMENT
Annexure-XIV_1.pdf
ATTACHMENT
Annexure-IIIIII_3.pdf
ATTACHMENT
Annexure-IVVVIVIIVIII_2.pdf
ATTACHMENT
Annexure-XIII_1.pdf
ATTACHMENT
2ndcorrectionslip.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].