Construction of Chitranali-II Check Dam over Local Nalla Near village Gagua in Tileibani Block of Deogarh District under MATY Scheme.

Excavation,loading,unloading and carriage by mechnical means of all kind of soil excluding Distintigrated rock but including gravel etc.interspread with boulders up to 1/2 cum in size with all lifts and delifts including trimming of slopes and bed to design section and laying in layers not exceeding 0.3M in depth and as directed by EIC within all leads and lifts from the place of excavation etc complete excluding GST as directed by Engineer in charge. (Measurement will be taken on finished level section)

Filling foundation & plinth with excavated materilas including watering & ramming to all height with all leads & lifts with supply of all labour, all taxes as per norm and T&P required for the work etc complete in all respects as directed by the Engineer-in-charge.

Providing cement concrete M15 grade with 20mm size and down graded crusher broken hard granite ccoarse aggregate quarried & free fom weather skin surface and other deletorious materials,quarry debrish of approved quality clean and sharp sand of approved grading & quality conforming to design specification mixing by concrete mixture including hoisting lowering and laying the concrete in position to proper slope and level and compacting with vibratior in layers not exceeding 0.15m depth and finishing the exposed surface smooth including watering,curing for required period providing beads and grooves and cost,conveyance,royalty of all materials,labour,T&P Materials required for this item including hire and running charges of the machineries,workers welfare cess etc.complete excluding GST in all respect as directed by the engineer-in charge.

Providing Cement Concrete M20 grade for RCC works with crushed granite 20mm down graded crusher broken chips of approved quality free from skin materials mixing by concrete mixer including hoisting lowering and laying the concrete in position to proper slope and leve and compacting by vibrators in layers not exceeding 0.15m depth and finishing the exposed surface smooth including watering, curing for required period with cost, conveyance, hire and running charges of all machineries, royalty and cost of all labour, T&P , workers welfare cess etc. complete in all respect excluding GST as directed by the Engineer in charge.

Providing Straightening, cutting, bending, binding, fitting and placing uncoated HYSD Fe 500 D bar of (SAIL/TATA) make reinforcement and laying in position including cost of binding wire 18 to 20 gauge and fixing of reinforcement including lapping where necessary with all leads, lifts from bending yard to placement spot including cost ,conveyance & all taxes of reinforcement etc complete excluding GST as directed by the Engineer-in-charge.

Providing rigid and smooth centering, shuttering for R.C.C. work at all height / depths and for all location as per approved drawing and dismentaling then after casting including cost, conveyance & all other taxes of all materials with all labour T & P materials, Workers welfare cass and depositing the debris clear of the work site with all leads and lifts etc complete excluding GST in all respect as directed by the Engineer-in-charge

Rough stone dry packing in approns and revetments to all heights with hard stone of 30 cm and above size of approved quality including fillingthe interstices with small stones with including cost ,conveyance & royalty &other taxes of all materials required for the work etc; complete in all respect excluding GST as directed by EIC

Providing weep holes in plan / Reinforced concrete, wing wall/return wall with 100 mm dia cement concrete porous block cast in CC 1.15, extending through the full width of the structure with slope 1V : 20H towards draining face and in canal bed including cost, carriage, royalties and taxes of all materials, supply of all respect as per approved design, specificition and as per the direction of the Engineer-in-Charge.