Construction of Electrical Panel room near SLN Nagar Pump House, NALCO DAMANJODI

Amount

2.6.Earthwork in Excavation by mechanical means (Hydralic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

2.6.1.All type of Soil

2.25.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

15.6.Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

2.27.Supplying and filling in plinth with sand under floors, including watering, ramming consolidating and dressing complete.

4.1.Providing and laying in position Cement Concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

4.1.8.1:4:8 (1 Cement : 4 coarse sand (Zone-III): 8 graded stone aggregate 40mm nominal size)

5.1.Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

5.1.2.All Works upto Plinth Level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.2.Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

5.2.2.All works above Plinth level upto Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22A.Steel Reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete

5.22A.6.Thermo-Mechanically Treated Bars of grade Fe-500D or more.

5.9.Centering and Shuttering including strutting, propping etc. and removal of form for:

5.9.1.Foundations, Footings, Bases of Columns, etc. for mass concrete

5.9.3.Suspended floors, roofs, landings, balconies and access platform

5.9.6.Columns, Pillars, Piers, Abutments, Posts and Struts

4.17.Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

50 mm thick of cement concrete 1:3:6

6.4.Brick Work with non modular Fly Ash Bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

6.4.2.Cement mortar 1:6 (1 cement : 6 coarse sand)

6.4.Brick Work with non modular Fly Ash Bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : (CEMENT & FLY ASH BRICK SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE)

6.4.2.Cement mortar 1:6 (1 cement : 6 coarse sand)

13.1.12 mm Cement Plaster of mix : (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

13.1.2.1:6 (1 cement: 6 fine sand)

13.16.6 mm Cement Plaster of mix : (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

13.16.1.1:3 (1 cement: 3 fine sand)

13.8.Providing and applying white Cement Based Putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.47.Finishing walls with Premium Acrylic Smooth Exterior Paint with Silicone additives of required shade

13.47.1.New Work (Two or more coats applied @ 1.43 ltr/10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

13.83.Wall Painting with Premium Acrylic Emulsion Paint of Interior Grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

13.83.2.Two coats

11.41.Providing and laying Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

11.41.2.Size of Tile 600x600 mm

9.2.Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

9.20.1.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

9.77.Providing and fixing bright finished brass 100 mm Mortice Latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

9.77.100 mm Mortice Latch

9.74.Providing and fixing bright finished brass Tower Bolts (barrel type) with necessary screws etc. complete :

9.74.1.size-200x10 mm

9.81.Providing and fixing bright finished brass Handles with Screws etc. complete:

9.82.Providing and fixing bright finished Brass Hanging type Floor Door Stopper with necessary screws, etc. complete.

. Brass Hanging type Floor Door Stopper

21.1.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately).

21.1.1.3.Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron).

21.1.2.For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

21.1.2.3.Polyester powder coated aluminium (minimum thickness of polyester powdercoating 50 micron).

21.3.Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item).

21.3.2.With float glass panes of 5.50 mm thickness.

9.48.Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.48.1.Fixed to steel windows by welding.

13.50.3.With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

13.61.Providing & Applying Painting with Synthetic Enamel Paint of approved brand and manufacture to give an even shade.

13.61.1.Two or more coats on new work

22.14.Grading roof for water proofing treatment with. Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).

22.14.1.Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

M/S BIJAYA KUMAR KHORA

RAMESH KUMAR BAGH

ANADI LAMTA

M/s D N PATRA

M/s D B MAJHI

M/S BHIMA MUDULI

M/S GHENU BISOI

M/s P.K.PATTNAIK

M/s RANJEET CONSTRUCTION