REPAIRS TO ROOF PATH WALL FLOORING CEILING JOINERY and MISC BR WORKS AT LRDE CAIR MES COMPLEX UNDER AGE B R I R and D WEST BENGALURU

Amount

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and directed.

Material and labour for roof treatment are as follows: (a) M&L Chip out the existing loosed bitumen / bitumen membrane completely reach up mother slab, clean the surface throughly to make it smooth and free of any foreign material, repairs the concrete wherever damaged using PMM HS repair, repairing of construction joints/cracks by chasing with cutting machine and fill the same with polymerized mortar in HS repairs, covering of 75 x 75 mm should be made at the junction of wall and raft slab using polymerized cement 1:4 admixed with advanced latex plus.(b) Applying one coat of 50% diluted self primimg PU roof coat. Allow to dry bond coat for 4-6 hours before applying PU coat and surface to be cleaned before applying PU coat.(c) Applying two coats of single component, cold applied, water based polyurethane modified acrylic dispersion with hi9ghly elastic and UV resistant water proofing treatment to the roof with HS PU Roofkoat of Berger or equivalent at 0.6 Kg/sqm for each coat without dilution confirming to ASTM D 6083-97a (standard specification for liquid applied acrylic coating used in roofing) Each coat should allow to dry 4-6 hours. The component shall have a density of 1.25 to 1.3 kg/litre, having tensile strength of 1.5 N/mm2, having elongation of 350% with solid content not less than 60% in 2 coats. SRI value should be more than 100. The quoted rate shall include surface preparation, repair the crack in mother slab by chasing with cutting machine and fill the same with polymerized mortar in CM 1:4 admixed with latex agent of reputed manufacture, making coving at junction, bore packing, treatment of construction joints completely as per manufacturer's specification and direction of the Engineer-in-charge.Make: Berger or equivalent. Note: (a) The above treatment shall be got carried out by the authorized applicator of the manufacturer approved by the GE. (b) Padding concrete for maintaining slope will be measured and paid separately under respective item. (c) Screed bed of 15 mm thick in CM 1:4 mixed with water proofing compound over concrete padding are measured and paid under respective item. (d) Supply only water prrofing compound will be measured and paid for separately under respective item.

Material and labour, for plain cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate) as in padding concrete / leveling course over slabs, finished fair to receive screed bed and water proofing treatment, complete all as specified and directed.

M&L for 15 mm thick screed bed in CM (1:4) finished surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work etc complete all as specified and directed.

Material and labour for false ceiling at any height using integral densified calcium silicate, reinforced with fibre and natural filler false ceiling tiles of size 595 mm x 595 mm of approved texture, design and patterns having NRC (Noise reduction co-efficient) of minimum 0.5 as per IS 8225 : 1987, Light reflectance of minmum 85%, non-combustible as per BS : 476 (Part - 4), fire performane as per BS : 476 (Part 6 & 7), humidity resistance of 100%, thermal conductivity < 0.05 W/m K as per ASTM 518 : 1991, fixed in true horizontal level, suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanised @ 120 grams per square metre on both sides), comprising of main - T runner of size 24 mm x 38 mm of length 3 m, cross - T of size 24 mm x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, Grid suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per square metre) i.e., 50 mm long, 8 mm outer diamter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mm x 25 mm x 25 mm x 2 mm. Galvanized iron perimiter wall angle of size 24 mm x 24 mm x 0.4 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre, 40 mm long dry wall stainless steel screws complete all as directed by Engineer-in-Charge including taking down old false ceiling and grid. Note : Ceiling Tile shall be of 15 mm thick densified tegular edged light weight calcium silicate of Make Aerolite or techno commercial equivalent.

Supplying only liquid water proofing compound

Cutting of tree branches of girth not less 10 cm falling over the building roof top upto a height of 15m from ground floor and cleaning the roof surface viz., leaves, tree branches etc incl removing of branches, leaves out of MD land all as specified and as directed by Engr-in-charge.

Cleaning of foliage on accessible / non accessible upto six storeyed roof top, mud cakes, rain water pipe outlets to ensure to pass the water through RWP with out any stagnation, etc including proper arrangement of ladder, scaffolding if required and cleaning with water and removal of debris out of MD land complete all as specified and as directed by Engr-in-charge

Removing vegetation growth / plants of any size at the junction of SWR pipe and wall, parapets up to roots and making good disturbed the surface in CM 1:3 up to height of 16 m all as specified and directed.

M&L for 25mm thick PCC type B-0, (1:2:4) using 12.5 mm graded stone aggregate finsihed rough as in leveling course to receive top flooring setc compete all as specified and directed.

S&F for light shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:4) complete all as specified and as directed.

S&F for Dark shade / double charged Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:4) complete all as specified and directed.

S&F for coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:4) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F for glazed ceramic coloured tiles of size 350 x 250 x 7mm/ 450 x 350 x 7mm to 8mm in vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:4 all as specified and directed.

Dismantling of aluminium partition / windows of any size and any description complete all as specified and directed

S&F for powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed..

S&F for powder coated aluminium window and ventilator shutters, side hung / sliding type without sash bar, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc..complete all as specified and directed.

S&F for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm each in each pane all as specified and directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land all as specified and directed.

M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

Demolition of concrete block walling, RR masonary in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specifed and directed.

M&L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in two coats, 5mm thick in CM (1:4) including mixing of water proofing compound as a second coat over first coat of 10mm thick in CM (1:6) finished even and smooth complete all as specified and directed. Note: WPC shall be measured and paid seperately

M&L for 1mm thick wall care putty on ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of white wash on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts etc. and applying one coat of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper on walls complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper on ceilings complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkat or frames with shutters (with out taking off syhutters from the frame) n. exc 1.50 sqm each and removing from site all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified and directed.

S&F for 40 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, two faces covered with decorative face veneer with lipping / frame to match complete all as specified and directed.

S&F for 35 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides etc complete all as specified and directed.

S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification.complete all as specified and directed.

S&F for stainless steel hinges medium weight of size 100 mm complete all as specified and directed.

S&F for Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and directed.

S&F for Aluminium anodised cast type handles 150mm long all as specified and directed.

S&F in repair for aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and directed.

S&F in repair floor door stopper of rubber and aluminium alloy body, 100 mm size all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wooden surfaces exc 10 cm in width or girth complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 250 Ltrs but not exc 500 Ltrs all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 500 Ltrs but not exc 1000 Ltrs all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 1000 Ltrs but not exc 2000 Ltrs all as specified and directed.

S&F in repair 150 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws /fixed in repairs.

S&F in repair for 30mm width of flaps (when open) continuous (piano) hinges, mild steel bright finish or electroganised fiwed to wooden or angle iron frame complete.

S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 500 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 2000 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed.

S&F for Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and directed. Make: Vista or equivalent

Ravees Enterprises

Sai Ram Builders

MSA Constructions

MAYDINI CONSTRUCTION CO

Lucky Enterprises

M S K CONSTRUCTION

Solar Electricals and Electronics

MAJ CONSTRUCTIONS

ABHISHEK CONSTRUCTIONS

TANCARE HYGIENE AND HEALTH CARE