REPAIR TO BARBED WIRE REPLACEMENT OF RCC FENCING POST AND ALLIED WORK AT ZONE A AREA AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Dismantling ,posts or struts (wood, steel or RCC) any section , including taking out embedded portion in natural ground and making good disturbed ground, complete all as specified and as directed.

Dismantling ,posts or struts (wood, steel or RCC) any section , including taking out embedded portion in Concrete, brick work, ground masonry, etc. and making good disturbed ground, complete all as specified and as directed.

S&F MS angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165,complete all as specified and as directed.

Excavation of soft/loose soil in post holes (or similar holes) each n exc 0.5 Cum getting out returning ,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25cm,watering, complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete or for fixing of RCC/ angle post,complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 5 to 10mm, complete all as specified and as directed.

Supply and fixing 10mm dia mild steel round bars dia cut to length , bent to hook at ends for fixing as line wires to chain link fencing all as directed at site complete all as specified and directed.(Fe-290(GdeE-165),complete all as specified and as directed.

Dismantling fencing wire mesh, any type,complete all as specified and as directed.

Supply only chain link MS galvanised fencing wire mesh of 100 mm x 100mm size made with 3.40mm dia GI wire, complete all as specified and as directed.

Fixing only chain link MS galvanised fencing of size 100 x100 mm mesh and 3.4 mm dia wire including line wires, to any type of standards, rails, straining bolts, etc. including provision of binding wire,complete all as specified and as directed.

S&F in repair for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line to be wire measured),complete all as specified and as directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops,complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clip and confirming to grade Fe-410-W(Gde-250),complete all as specified and as directed.

All as per item no. 13 but 5mm dia and over upto and incl. 10mm dia in stirrups spacers and binders.

Demolition of Stone slabs and tiles laid, bedded and pointed in any mortar any description or thickness in floors, aprons etc,complete all as specified and as directed.

M&L for liquior finish/glossy finish chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors using white cement and pigments including 15mm thick screed bed in CM 1:6etc (as in patches and as per site condition) as per design/pattern approved by AGE(I) etc, complete all as specified and directed by Engr-in-Charge..

M&L for liquior finish/glossy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35grade over and including 50 thick sand cushion etc, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area, complete all as specified and as directed

M&L for 50mm thick cement concrete M-15(1:2:4) type B-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete,complete all as specified and as diredted.

M&L PCC 1:4:8 Type D-2 ( using 40mm graded agg.) as in foundation , filling and mass concrete,complete all as specified and as diredted.

M&L for PCC 1:2:4(Nominal mix)(using 20mm gradded aggregate) type B1 using stone aggregate as in coping benching,complete all as specified and as directed by Engr-in-Charge.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required,complete all as specified and as diredted.

Demolition of reinforced cement concrete in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance 50m at low lying area,complete all as specified and as diredted.

M&L for pre-cast RCC 1:2:4 Type B1 using 20mm gradded stone aggregate as in manhole cover/Drain cover slab and setting in CM (1:6),complete all as specified and as diredted.

M&L for RCC (nominal mix) Type B1(1:2:4) (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc,complete all as specified and as diredted.

M&L for RCC (nominal mix) Type B1(1:2:4) (using 20mm gradded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete,complete all as specified and as diredted.

M&L for RCC (nominal mix) Type B1(1:2:4) (using 20mm gradded stone aggregate) as in Columns, pillars, piers, posts and struts,complete all as specified and as diredted.

M&L for Formwork to side and soffits of floor or roof beams,lintels etc flat for fair finished surfaces,complete all as specified and as diredted.

M&L for Formwork to sides of concrete foundations, footing ,bases of colums, plinth beams rough finished surfaces and similar work,complete all as specified and as diredted.

M&L for Formwork to side of columns, fair finished surfaces of concrete square, rectangular and similar work,complete all as specified and as diredted.

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles,complete all as specified and as diredted.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6),complete all as specified and as diredted.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as diredted.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed.

M&L for preparation of new surface and and applying two coats of cement base paint over a coat of white cement primer on walls,complete all as specified and as diredted.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.

M/S Subhadip Enterprise (BID ID -3328436)

LALAN SHARMA (BID ID -3332601)

P .BANERJEE AND CO (BID ID -3327250)

M/S MBS TRADING CO (BID ID -3327246)

M/S New Builders Corporation (BID ID -3328393)

M/S AMARNATH AGARWALLA (BID ID -3335703)

M/S ASHA ENTERPRISE (BID ID -3328844)