ANNUAL MAINTENANCE PROGRAMME OF B/R FOR FY 2024-25 FOR LEKHA NAGAR JABALPUR (MAINT WORKS AT MD ACCN LEKHA NAGAR JABALPUR) UNDER AGE B/R-I OF GE (EAST) JABALPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. Note- The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. Note- The size of tiles (except thickness) may be varied during execution without any price adjustment.

All as per item No 3 herein before as in skirting / dado & including 10 mm thick rendering or backing coat in CM 1:4 complete all as specified and directed.

M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in CM 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform & other similar situations complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25 mm thick over & including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, dado & pillar over & including rendering 10 mm thick in CM 1:4, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for 25 mm thick cement concrete Type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub base flooring surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair, Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed.

S&F in repair, Vitreous china wash hand basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed.

S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed.

S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed.

S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair, internal fitting for 10 ltrs capacity PVC valveless, syphonic action type flushing cistern complete all as specified and directed.

S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair, Brass Chromium Plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed.

S&F in repair, 75 mm diameter of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repair, Soap Dish Holder any type fixed to plug with chromium plated brass screw complete all as specified and directed.

S&F in repair, Corner Glass Shelf with brackets complete all as specified and directed.

S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair, Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair, Door Seal with aluminium beading and 50 mm wide rubber seal, fixed to Aluminium/Wooden doors complete all as specified and directed.

S&F in repair, Floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm, with hard drawn steel spring, fixed in door complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc complete all as specified and directed.

Taking down PVC Water Pipe of any size or pattern including all fittings complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair, 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair, 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.50 sqm but not exc. 4 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed.

Taking down Shutters of any description area exceeding 1 sqm & not exceeding 2 sqm each and removing to store complete all as specified and directed.

S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded stone aggregate) for filling of hollow pressed steel frame complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F 35 mm thick, Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick, second class hardwood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coats of synthetic enamel paint (ordinary tint) over and including one coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth & applying two coats of Synthetic enamel paint (ordinary tint) over and including a coat of pink primer complete all as specified and directed.

M&L mild steel flat iron as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hooks and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L for Cutting holes in brick walls exc. half brick but not exc. one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, dovetailed or welded complete all as specified and directed.

S&F (factory made) steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilators with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete all as specified and directed.

S&F factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail: pannellingf of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drgs complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed. complete all as specified and directed.

S&F in repair, 18/19 mm thick, high density PVC/WPC solid fibre board with prelaminated PVC sheet as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm complete all as specified and directed.

S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed.

S&F ball valves for 20 mm bore of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F ball valves for 25 mm bore of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed.

S&F in repair ball valves for 20 mm bore of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repair ball valves for 25 mm bore of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed.

S&F in repair PVC Tank cover for Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore pipe complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore pipe complete all as specified and directed.

Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 20 mm bore of pipe complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 500 ltr & not exc 1000 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 using WPC and finished even and smooth (without using extra cement) complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparation of newly plastered or unplastered brick work or concrete surfaces and applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces and applying three coats of white wash on prepared brick work or concrete surfaces complete all as specified and directed.

M&L preparation of newly plastered or unplastered brick work or concrete surfaces and applying two coats of cement based paint over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

M&L preparation of old painted brick work or concrete surfaces and applying one coat of white wash on brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces and applying one coat of cement based paint on brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces and applying one coat of oil bound distemper on brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75 mm thick cement concrete Type C2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection etc and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L hardcore of broken stone or boulders of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered & rammed to a true surface complete all as specified and directed.

S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down bib tap/wash hand basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.

Taking down bib tap/wash hand basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.

S&F in repair, Brass chromium plated Wall Mixer 3-in-1 system with provision for bath hand shower & overhead Shower complete with 115 mm long bend pipe, connecting legs & wall flanges (without Hand & Over Head Shower) for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar Cat Part No.CON-281KN or as specified in Appx.

S&F in repair, Brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar Cat Part No.CON-319KNB or as specified in Appx.

S&F in repair, Chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, Chromium plated Two-way Bib Cock for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, 15 mm bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash hand basins with inlet & outlet screwed for pipe or connections including necessary packing, union and cap & fixed complete all as specified and directed.

S&F in repair, 32 mm bore, PVC waste pipe for Wash hand Basin/Kitchen Sink etc complete all as specified and directed.

S&F in repair, 32 mm dia of discharge pipe, waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms) etc complete all as specified and directed.

S&F in repair, 32 mm dia , waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair, chromium plated grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed.

S&F in repair, 300 mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Schedule of credit amount of Rs. 108204.02 to be deducted during AOC.

ISHWAR CONSTRUCTION COMPANY (BID ID -3280177)

MAA SHARDA CONSTRUCTION (BID ID -3277797)

M/S BHARTI ENTERPRISES (BID ID -3276169)

Chetna Enterprises (BID ID -3277809)