S/R to RD road to Rudrapur road for the year 2025-26 in the Dist. of Jajpur

Clearing and Grubbing road land incl. uprooting rank vegetation,grass,bushes,shrubs,sapling and tree girth upto 300 mm,removal of stumps of trees cut earlier and disposal of unserviciable materials and stacking of servicable material to be used or auctioned,upto a lead of 1000 metres incl. removal disosal of top organic soil not exceeding 150mm in thickness etc. complete and as per direction of Engineer-In-Charge

Flank dressing to proper camber etc. Complete and as per direction of Engineer-In-Charge

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material with in all lifts and lead upto 1000 meters

Providing,laying,spreading and compacting graded stone aggregate to wet mix macadam specification incl. premixing the material with water at OMC in mechanical mix plant,carriage of mixed material by tipper to site,laying in uniform layers with pavers in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MoSRT&H specification for Road & Bridge works.

Providing and applying primer coat using Bitumen emulsion at the rate of 0.60 kg per sqm on the prepared granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing and applying tack coat using 60/70 grade of Bitumen at the rate of 0.20 kg per sqm on the prepared old BT surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) etc. Complete and as per direction of Engineer-In-Charge

Poviding and laying semi dense bituminous concete with batch type hot mix lplant using cushed aggegate of specified gading pemixed with bituminous binder of 60/70 penitration gade of bitumen tanspoting yhe hot mix to wok site laying with hydostatic paver finishe with sensor control to the equied gade level and alignment rolling with smooth wheeled vibratory and tandom rolles to achieve the desied compction as per clause 508 of MORD specification for road and bidge wok(4th Revision)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works(4th Revision)