CA NO. CWE SGNR - 43 OF 2020-21 SPECIAL REPAIRS OF COOK HOUSE BUILDING NO. P-82/A/01, P-82/A/05 AND P-82/A/06 AT MILITARY STATION SRI GANGANAGAR (2ND CALL)

Amount

Dismatiling brick tiles or terracing tiles, single layer on roofs and mud phuska complete all as specified and directed by Engineer - in - Charge.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for wire brushing and cleaning top surface of roof or cement concrete and applying evenly a tack coat of industrial bitemen 85/25 at the rate of 1.20Kg per Sqm complete all as specified and directed by Engineer - in - Charge.

Material and Labour for polythene film, 150 micron thick, laid on a coat bitumen primer @ 0.30 to 0.50 Kg/Sqm complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 80mm thick lime concrete terracing as specified in roof complete all as specified in MES Sch Part-I and Part-II complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed by Engineer - in - Charge.

All as per Srl Item No 06 here-in-before but for except brick tiles complete all as specified and directed by Engineer - in - Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.

Material and Labour for non skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exc 0.36 sqm in floor laid in pattern with two or more coloured tiles combination and design as approved to match the wall ceramic tiles etc set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 finished and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Glazed ceramic tiles 450X 350X 7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

Material and Labour for machine cut Kota stone slab flooring 20 mm thick over 15 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing and polishing complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No.11 here in before but for on vertical surfaces over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Granite (of any type) work 20 mm thick (table rubbed and polished) in hand wash platforms over 15mm of screed bed in cement mortar 1:6.complete. including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer - in - Charge.

Demolation of Brick work or stone/ boulder masonry, built in lime mortar including all quoins, arches,pillars,etc, complete all as specified and directed by Engineer - in - Charge.

Material and Labour for brick work with sub class 'B' Bricks, well burnt straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 15 here in before but except bricks complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 15mm thick rendering in cement mortar 1:6 in fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 15mm thick rendering in cement mortar 1:4 in other faces of brick or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces on patches as on ceilings finished even and smooth complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying three coats of white wash on wall complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old decorated plaster surfaces and applying a coat of white wash on ceiling complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new plaster surfaces and applying two coats of cement base paint over a coat of white wash on new plastered surfaces complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of existing treated /painted old plaster surfaces and applying a coat of cement base paint complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation and complete removal of existing treated /painted old plaster surfaces and applying two coats of oil bound distemper complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of wall new plaster surfaces with wall putty and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old painted wood and wood base surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of old painted steel surfaces over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames(without taking off shutters from the frame) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames(without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down shutters of any description size exc 1.00 Sqm and n exc 2 Sqm complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames(without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and refixing the same opening complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for pressed steel door frame of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed by Engineer - in - Charge.

S&F for mild steel flat iron 25mmx 6mm as in hold fast conforming to FE-290 Gde E-165 complete all as specified and directed by Engineer-in-Chage.

Cutting holes in brick (n.exc half brick) in brick walls built in cement mortar inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engineer - in - Charge.

Dismentling mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer - in - Charge.

Supply and fix for steel windows with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.

Supply and fix for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 35 mm thick Factory made IInd class hard wood plain framed panelled shutters (any number of Panels ) with lock rails and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces the size of rail and stile as per IS :1003 (Part -I) Klin Seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and repared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for Aluminium window and ventilator shutters, side humg type without sash , aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer - in - Charge.

Supply & fix 100 mm long butt hinges cold rolled medium weight, fixed with steel screws complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium handles cast type anodised, 150 mm long complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium anodised barrel tower bolts of extruded section and fixed 125 mm size complete all as specified and directed by Engineer - in - Charge.

Supply and fix for 300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.

Supply and fix for aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repair Aluminium anodised hasp and staple 150mm , with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer - in - Charge.

Material and Labour for preparation of new steel surfaces over 10 cm width or girth, not otherwise described and applying two coats of applying synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty in each pane of size n exc 0.50 sqm complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 4 mm thick figured glass ordinary quality and glazing with oil putty in each pane of size n exc 0.50 sqm complete all as specified and directed by Engineer - in - Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed by Engineer - in - Charge.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 15mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 25mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 66 here-in-before but for re-fixing 15 mm bore any grade to walls and ceiling or laying in floors complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 20mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 68 here-in-before but for re-fixing 20 mm bore any grade to walls and ceiling or laying in floors complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for steel water tubing galvanised 25mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 70 here-in-before but for re-fixing 25 mm bore any grade to walls and ceiling or laying in floors complete all as specified and directed by Engineer - in - Charge.

Dismantling water tank capacity exceeding 500 Ltr and not exceeding 1000 ltr complete all as specified and directed by Engineer - in - Charge.

Dismantling water tank capacity exceeding 250 Ltr and not exceeding 500 ltr complete all as specified and directed by Engineer - in - Charge.

Dismantling water tank capacity not exceeding 250 Ltr complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for rotational moulded polyethylene water storage tank 500 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for rotational moulded polyethylene water storage tank 250 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge.

Ssupply and fix in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excluding flushing cistern) including all joints and connection to trap, CI 'P' trap/S trap etc and making good to the floor complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Cement concrete 1:3:6 type C–1(20 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for Stop valves, 15 mm bore cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Stop valves, 25 mm bore cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Stop valves, 15 mm bore cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for Grating doom 100mm dia PTMT(minimum weight 25gms) complete all as specified and directed by Engineer - in - Charge.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or floors complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for 75 mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or floors complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed by Engineer - in - Charge.

Supply in fix in repairs 100mm C I branch pieces, doube (equal or unequal) ordinary or inverted (spigot or socket type) complete all as specified and directed by Engineer - in - Charge.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 75mm thick cement concrete type C-2, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by Engineer - in - Charge.

Material and labour for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 75mm thick Cement concrete 1:4:8 type B 2 40 mm graded aggregate in filling and mass concrete including necessary form work complete all as specified and directed by Engineer - in - Charge.

Material and Labour for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.

Material and labour for 25 mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Material and labour for providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4) complete with joints to match complete all as specified and directed by Engineer - in - Charge.

Material and labour for Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and pigment M-35 Grade 20mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engineer - in - Charge.

Demolition of Cement concrete(reinforeced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Reinforced Cement Concrete 1:2:4, Type B–1 using 20 mm graded stone aggregate for slabs supported on walls, beams, columns and in shelves, the like complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 105 here-in-before but for 5 mm dia and over upto and including 10 mm dia in stirrups, space and binders complete all as specified and directed by Engineer - in - Charge.

Supply and fix in in repairs vitreous China urinals,half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engineer - in - Charge.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer - in - Charge.

Material and Labour for 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed by Engineer - in - Charge.

Material and Labour for Concrete bed to for 150 mm drain pipes Cement concrete 1:3:6 type C2 40 mm graded stone aggregate including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class hard wood complete all as specified and directed by Engineer - in - Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (framed work) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Continuous( piano) hinges , mild steel , bright finish or electrogalvanised Width of flaps 30mm (when open) complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer - in - Charge.

Supply and fixing for hasp and staple, safety type stove enameled black, of mild steel 100mm size complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in Cement mortar 1:3 etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 119 here in before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No119 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No.119 here in before but for one socket outlet 3 pin 15 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Single pole and neutral enclosure with a two pin and earth plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer-in-Charge.

Supply and fix for ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs light fitting with LED batten with aluminum housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz, 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/2 mm upto ceiling rose/connector complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing Make : Havells Cat Part No : LUMILINEPLUSBS20WLED865SPCSS, Bajaj Cat Part No : BCLSBAL 20W CW, Crompton Cat Part No : CCS-100-20-65-HL2-DP-NWH or as approved by GE

Supply and fix in repairs security light fitting LED type 25 watt with all necessary accessories, clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 Hz AC & Supply and fixing to wall/on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore" light grade" brackets 2 mtr length bent to shape obtained required shape including clamps, nuts/bolts/washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing Make : Havells Cat Part No : ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj Cat Part No BRLEP25W LED WH, Crompton Cat Part No LSTS-25-CDL-M or as approved by GE

Supply and fix for angle holder insulated body with back plate for conduit fittings including LED bulb 9 W complete all as specified and directed by Engineer-in-Charge.

Supply and fix for LED lamp 9 W for angle holder complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing

Supply and fix in repairs compact and decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing

Supply and fix in repairs stepped type electronic fan regulator flush type for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in PVC conduict including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer-in-Charge. Note : PVC cable and PVC conduit shall be ISI marked

Supply and fix in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A , Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCCB TP&N 40 Amps with breaking capacity 16KA, Fixed TM and 415 Volts AC Supply ISI marked complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories including testing on completion complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading levelling watering and well remming in layers not exedding 25cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and Labour for sand cushioning with dry coarse sand to under ground cable below and around after laying the cable jently punning down complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

Supply and laying for cable protection well burnt bricks old size size bricks sub-class B type laid flat ,length of bricks across the route of under ground cable complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs jointing and testing and commissioning in replacement of 25 Sqmm x 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 33,172.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 31 & 32 (Schedule of Credit) of Tender document

M/S KARNI CONSTRUCTION COMPANY

KHANNA CONSTRUCTIONS

M/S BUDHRAM BISHNOI