PROVN OF ALUMINIUM SHUTTERS FOR CORRIDOR OF ADMIN BUILDING AND SHEET AT OPEN TERRACE OF TECH SECTION AND TELEPHONE EXCHANGE ROOM AT ICGS AND STAINLESS STEEL RAILING AND ROOFING OF OFFICERS MESS AT ICGAS RATNAGIRI UNDER GE I CG RATNAGIRI

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers not exceeding 25cm, watering, & removing surplus soil to a distance not exceeding 50m & making good surface in soft/disintegrated rock all as specified and as directed.

Cutting chases, pining in Stone, concrete block or slab walls not exc 10 cm girth, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc all as specified and directed.

M&L for PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate all as specified and as directed.

M&L for Machine cut Laterite stone masonry exceeding 10 cm in width square rubble, regular coursed, well bonded, bedded and solidity hearted ,built in cement mortar 1:6 of approx size 38x23x20 cm laterite stone blocks all as specified and directed.

S & F anodised aluminium powder coating (minimum thickness of powder coating 50micron) frame for doors windows,ventilators and partition section with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coating door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F Anodised aluminium powder coating window and ventilator shutters,fixed /sliding type without sash bars, including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed

M&L for 5.5 mm thick plain sheet glass seleted quality in squares exceeding 0.5 Sqm each pane and fixed in anodised aluminium frame work including necessary joining cleats, glasing clips, rubber neoprene pack in etc. all as specified and directed

M&L for 4mm thick plain sheet glass ordinary quality and glazing, with oil putty in squares, not exceeding 0.5 sqm in each pane all as specified and directed

M&L for 4mm thick plain sheet glass ordinary quality and glazing with oil putty in squares, exceeding 0.5 Sqm in each pane all as specified and directed.

M&L Rendering 15mm thick in cement mortor 1:6 on laterite stone masonary finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brickwork in cement mortar 1:6 m finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering(10mm+5 mm) thick on fair faces of latrite stone masnory or concrete surfaces in CM 1:4 in two layers, first layer 10 mm thick backing coat in CM 1:4 and 5mm thick finishing coat in CM 1:4 using integral water proofing compound finished even and fair all as specified and as directed. Note : WPC will be measured and paid seprately under relevant item of Sch 'A'.

M&L for Preparing new surfaces of walls applying two coat of Oil Bound Distemper over a priming coat complete all as specified and directed.

M&L for Preparing new plaster surface of wall of any description and apply two coats of water proof acrylic emulsion anti fungal (Exterior grade) over a coat of primer complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates, confirming to Fe 410-W (Gde E-250) quality b all as specified and directed.

S&F for mild steel of square/round shape Steel work in tubular trusses including special shaped washer, cleats etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 all as specified and as directed.

S&F for rolled mild steel plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment of Gde Fe 410-W (Gde -E-250) quality A all as specified and as directed.

S&F roof trusses (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle channel or flat sections) including distance pieces, cleats etc confirming Fe 410-W (Gde-E-250) quality-A all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc fixed with self tapping screws all as specified and as directed.

S&F Fibre glass reinforced transulent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof , wall etc all as specified and directed

S&F PVC (SWR) pipes of 110 mm dia bore single socketed in any length with rubber ring joints complete fixed to walls all as specified and directed.

M&L for stainless steel round pipes of grade 304, any dia up to 50mm dia for railings, posts etc including cutting to size, erecting in position and welding/brazing all as specified and directed.

Supply only integral water proofing compound ISI marked all as specified and directed

m/s Pravin s Bhosale

M/S V C SHETH