SPL REPAIR TO BLDG NO P-20 THE MALL (DADS OFFICE) AT MEERUT, PROVN OF WATER STORAGE TANKS AND GARBAGE BINS FOR APS AT MEERUT AND ERECTION OF BOUNDARY PILLARS OF DEMARCATION OF IDENTIFIED SURPLUS LAND AT O.F. MURADNAGAR UNDER AGE B/R-III OF GE (SOUTH

Amount

Taking down old existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises. Complete all as specified and directed.

M&L 20mm thick screed bed in cement mortar 1:4 as in padding on roof surface mixed with water proofing compound @ 200ml per 50kg of cement consumed. Complete all as specified and directed. (Note- water proofing compound consumed under this item will be measured & paid separately under "Supply only Item").

Supply only integral water proofing compound liquid complete all as specified and directed.

FIVE Course Water Profing Treatment:- M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed by applying evenly a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane of weight not less than 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top with polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed. Note:- Water proofing treatment work shall be done with manufacteres authorised applicater only under strict supervisin of manufacturer technical representative.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. groove cutting for roof treatment, and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) (using 20 mm well graded crushed stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in cement mortar 1:4 with joints to match. Complete all as specified and directed.

Demolition of Precast cement concrete louvers and jallies incl coping etc including removal of debris to a distance not exceeding 500 mtr & clear the premises. Complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mouldings but excluding frame type B-0, 1:2:4 (using 12.50mm well graded crushed stone aggregate) and set in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surface on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for complete removal of exisitng treatment on external wall surfaces by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water and applying two coats of exterior grade weather proof acrylic emulsion paint over a coat of (water based) primer only after primer completly dried. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The acrylic paint shall be applied by mechanically airless paint sprayer machine only and throgh applicator.)

M&L for treatment on new plasterd surface wall on external surfaces by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water. Applying a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of exterior grade weather proof acrylic emulsion paint. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The acrylic paint shall be applied by mechanically airless paint sprayer machine only and throgh applicator.)

M&L preparation old plastered surfaces of wall and applying two coat of oil bound distemper Including 1 mm thick wall care putty. Complete all as specified and directed.

M&L preparation new plastered surfaces of wall and applying two coats of oil bound distemper Including 1 mm thick wall care putty. Complete all as specified and directed.

M&L preparation old plastered surfaces of ceiling and applying one coat of oil bound distemper Including 1 mm thick wall care putty. Complete all as specified and directed.

M&L preparation new plastered surfaces of ceiling and applying two coats of oil bound distemper Including 1 mm thick plaster of paris wall care putty. Complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F GI frame work for seamless ceiling suspension system comprising of GI perimeter channel including hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slabs fasteners 12.5mm dia, 40mm long complete all as specified Including12mm thick gyro boarding (gypsum board) of size 1800x1200mm impregnated with the water proofing paper. Fixed to the ceiling section with 25mm long self drilling & tapping screws having Phillips head with under head cutter at 200mm centre to centre including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fiber tape (Note: Design/pattern shall be approved by GE at the time of execution).

S&F welded steel wire fabric to wood or steel members nexc 4.00 kg /sqm. Complete all as specified and directed.

M&l for mild steel joist, channel , angle or tee section (fixed independently) as in framed work (for false ceiling), cladding, glazing and the like fixed with angle cleats and connectting plates having ends are fixed rigidhy in walls with PCC 1:2:4 type B0 (Using 12.5mm well graded crushed stone aggregate) and grouted in cement mortar 1:6. Complete all as specified and directed. Note:- Height of building is upto 10 meter and there is no conveyenance to reach the top. Contract should arrange the conveyance and shall accordingly quote the rate for this item.

Taking down shutter of size exceeding 1 sq. m and not exceeding 2 sq m each complete all as specified and directed.

S&F 40mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed.

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with alu.wire staples complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 100mm butt hinges, medium weight cold rold mild steel. Complete all as specified and directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing. Complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surface complete all as specified and directed.

Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surface complete all as specified and directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75mm thick PCC in 1:3:6 type C2 (using 40mm well graded crushed stone aggregate) as in plinth protection complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type A. Complete all as specified and directed.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with alu.wire staples. Complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty/wooden beadding in square not exceeding 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type of J-type or cranked hook bolts in lieu of screw in roof, wall etc complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc. Complete all as specified and directed.

Demolition for portion ordered to be dismantled of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

S&F box type Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl GI wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with staples, 3.0mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane, 12mm dia square bar for grill and Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome as per site requirement and direction.

S&F mild steel 300mm, ordinalry rat rail rod pattern springs including roller and roller plage. Complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L Cement concrete type C-2, 1:3:6 (using 40mm graded agg) as in foundations, filling and mass concrete complete all as specified and directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Supplied, hoisted and fixed inposition rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm dia GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm dia GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L providing precast cement concrete type B-1, 1:2:4 (using 20mm graded agg) as in CM 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L preparation of new plastered surfaces of wall including cornicer etc and applying two coats of cement base paint. Complete all as specified and directed.

M&L complete removal of existing treatment & preparation of old plastered surfaces of wall and applying two coat of cement base paint. Complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth, for foundation etc, or for shaft, well, cesspits, manhole, pier holes etc, n exc 10 Sqm on Plan and n exc 1.50 m in depth and getting out soft/loose soil, complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2, (using 40mm well graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified & directed.

Returning, filing in including spreading, levelling watering & well ramming in layers not exc 25 cm as in hard/dense soil. Complete all as specified and directed.

Removing excavated material to a distance not exc. 50m & depositing where directed at a level n exc 1.50m aboove starting point complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165. Complete all as specified and directed.

Surface excavation (not exceeding) 30cm deep and averaging 15cm deep and geeting out in soft/loose soil complete all as specified and directed.

M&L hardcore (broken stone or boulders) of gauge nexc 63mm, deposited, spread and levelled in layers nexc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) as in sub-base complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L Precast cement concrete 1:2:4 type B1 (using 20 mm well graded crushed stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, kerb stone, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 with joints to match complete all as specified and directed.

M&L PCC 1:4:8 type D-2, (using 40mm well graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per srl item No 77.00 here-before but 5mm dia and over upto and including 10mm dia as stirrups, spacers and binders complete all as specified and directed.

M&L providing reinforced cement concrete (design mix) M-20 (using 20mm graded agg) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L reinforced cement concrete, M-20 desing mix as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L providing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter as in rough finished flat surface of concrete complete all as specified and directed.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions as in rough finished flat surface of concrete complete all as specified and directed.

M&L for rendering 15mm thick cement mortor 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement. complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on concrete surfaces of any description, including preparation of new surface. Complete all as specified and directed.

M&L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm highcomplete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings, Security Light fittings, Ceiling Ligh fittings etc removing material from site to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable FRLS in and including PVC concealed conduit of not less than 20 mm dia or higher medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated solid copper conductor cable, FRLS, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 87.00 here-in-before, but one ceiling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per item No 87.00 here-in-before, but with 1.5 Sqmm nominal cross sectional area copper conductor cable FRLS for one 5 / 6 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 87.00 here-in-before, but one 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 87.00 here-in-before, but one bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 Sqmm.

All as per item No 87.00 here-in-before, but with 2.5 Sqmm nominal cross sectional area copper conductor cable FRLS for one 15 / 16 Amps socket outlet point on independent board.

S&F switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

S&F socket outlet 2 in 1, 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

S&F switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

S&F of socket outlet 2 in 1, 3 pin, 05 / 06 Amps and 15 / 16 Amps, flush type, 240 volts complete all as specified and directed.

S&F stepped type electronic fan regulator flush type , 230 volts, AC complete all as specified and directed.

S&F lamp holder (Angular / Straight), PCV/Polycarbonate insulated body, with back plate for batten fitting complete all as specified and directed.

S&F and bell push flush type, 5 amps, 240 volts, complete all as specified and directed.

S&F bell AC, 230 volts single pole:- Cona/Anchor complete all as specified and directed.

S&F LED lamp 9/10 watts, CDL, with Star rating complete all as specified and directed. Make :- Havells, Cat part No LHLDEUEBML8R009 or equivalent to Crompton/Wipro

S&F decorative integral LED Tube light fitting 1x10 Watt, 2' long, polycarbonate housing complete with all accessories and fixing material complete all as specified and directed. Cat Part No - LUMLINEBS9WLED865PCWH, Make : Havells or equivalent in cropton/Bajaj

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with flexible copper conductor cable of suitable size all as specified & directed. Model - HEXA 10W, Make - Havells or equivalent in Crompton/Wipro.

S&F Inegrated type LED lights fitting 1x 20W, 220V, AC polycarbonate housing with driver, connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Cat Part No - LCTLN-20-CDL, Make - Crompton or equivalent in Havells / Bajaj

S&F Decorative wall light fixture made up of Polycarbonate, suitable for 9/10 W LED lamp B22 base including 9/10 W LED lamp and including all accessories for fixing of fitting on wall all as specified and directed. Make Havells, Model-FLORET, ordering code LHFHCHE1TL1W020 or equivalent in Philips /Bajaj/ Surya.

S&F LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including provisson of 32 mm bore light grade GI tube mounting bracket 0.6 m long made to shape bend to 100 to 120 degree and fixed to wall by means of flat iron clamps and suitable nuts, bolts grouted in wall etc and provision of weather proof PVC insulated copper conductor cable 2.5 Sqmm 2 core as required for connection including taking down old security light fitting with bracket any type/size all as specified and directed.

S&F recess mounting LED 2'x2' luminaire 35/36 W CRCA powder coated housing with anti glare diffuser new deep back lit panel including driver, holders & LED lamp suitable for roof/Gypsum board ceiling including cutting in board of proper size for fixing the light fitting & connecting up with flexible copper conductor cases of suitable size complete all as specified and directed.

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.

M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor FRLS cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking down old subain wiring any type or size. Note:-One meter of 25mm dia non-metallic PVC conduit along with 2x6 sq mm wire and 01x6 sqmm earth wire shall be measured and paid as one unit length.

M&L for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor FRLS cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking down old subain wiring any type or size. Note:-One meter of 25mm dia non-metallic PVC conduit along with 2x4 sq mm wire and one 1x4 sqmm earth wire shall be measured and paid as one unit length.

Taking down carefully unserviceable distribution board/industrial type SPN enclosu of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed.

S&F industrial type SPN enclosure with a two pin and earth plug and socket complete with and including one single pole MCB 32 Amp, 240 Volts complete all as directed. Make - Legrand/ABB/Schneider

M&L Sheet metal enclosure for DB's double door 240 Volt with IP 43 protection 200 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties SPN 12 way complete all as specified and directed.

S&F Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed. Note : MCCB & MCBs to be fixed in this DB will be measured and paid separately under relevant items.

S&F MCB SP, AC, 240 volts of 06 to 32 Amps, C curve, 10 kA. complete with connection testing and commissioning complete all as specified and directed..

S&F MCB SPN, AC, 240 volts of 40 to 63 Amps, C curve, 10 kA. complete with connection testing and commissioning all as specified and directed.

S&F MCCB 4 Pole 100 Amps 16 KA, 415 volts, 50 Hz with adjustable thermal & magnetic release and suitable frame size as to be fixed in above VTPN DB, all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed. Note:-After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt.

Taking down ceiling fan/Exhaust Fan, ceiling cable end, dismantling blades and deposited to AGE E/M-II store yard complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Complete all as specified and directed. Note :- Length of down rods should not be less than 3 Mtrs and fixing arrangement for down rods from existing iron guarder to fan hanging height should be inclusive to this item.

S&F exhaust fan, steel body AC single Phase, 230V of size 30mm sweep, copper winding with, blades, and frame and louvers complete all as specified and directed. Model - Ventil Air DB, Make - Havells or quivalent in Crompton/ Usha/ Orient/ Bajaj.

Jay Ambay Enterprises

jitendra AND Co

R.D.Builders

AR Enterprises

M/S AGARWAL CONSTRUCTION CO.

High Tech Metal India

veer enterprises