8386 E8 COMPREHENSIVE REPAIR AND MAINT OF OTM INF BN I, II AND III AND MINOR UNITS INCL INTERNAL WIRING FITTING, REPAIR TO CEILING FAN, EXHAUST FANS, GEYSERS SUBMAIN WIRING, DBs JUNCTION BOX, SECURITY LIGHTS AT VARIOUS LOCATION AT MIL STN SHAHJAHANP

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.

M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L for 1mm thick JK Wall putty on wall all as specified and directed

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified

M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing Old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F aluminium anodised windows,ventiletators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid down

S&F pressed steel frames of size 125*60 for doors with one or more rebates including necessary fixing lugs,hinges,lock,strike plate,etc. complete as specified,with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid down

S&F pressed steel frames of size 165*60 for doors with one or more rebates including necessary fixing lugs,hinges,lock,strike plate,etc. complete as specified,with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid down

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S & F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass , gauze etc (without sash bars) , edges of framing plain , chamfered or rounded , fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) , supplied and fitted to chowkats.

Dismantling boarding any size and description fixed in any position with nails

S&F 20mm thick PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides.

S&F haps and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 150 mm long mild steel pressed handles oval type stove enamlled black

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down steel/wooden window of any size and description complete.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded.

S&F steel ventilator with top hang shutter including hinges steel pag stay,complete.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe410

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden/steel frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and direcetd.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete

M&L for preparation of sunken floor and making couvet filld at junstion of wall in CM 1:3 with water proofing compound(DURAKRIT) then apply acrylic(PMC) slurry as per mfg instruction as 1:2 on floors and wall upto floor level,and apply 2 coat after 4 hours.After that Ponding test will be carried out.After that plaster all surface with CM 1:4 20 mm thick with WPC(DURAKRIT)

Removing existing water proofing treatment including plaster & PCC bedding layer if any and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 10mm thick plaster in CM 1:4 with WPC on roof surfaces over 25mm thick PCC B0 1:2:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

M & L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in dado/skirting etc including 10 mm thick rendering in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick rendering in CM 1:4 complete complete all as specified and as directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm , set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and incl 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device

S&F in repair CP Health Faucet with 1 Meter Flexible tube & Hook (Make- L&K or equivalient) complete all as specified an directed.

S&F in repair toilet paper holder box type coloured of vitreous china fixed to wall with chromium plated (CP) brass screw complete as specified and directed

S&F in repairs 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repair Jet spray chromium plated with 1mtr heavy PVC hose butterfly type, with chromium plated nuts complete all as specified and directed.

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

Taking down old 110/75 mm bore PVC(SWR) pipes in any position

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75 mm bore. PVC (SWR) bends

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door

S&F 110 mm dia PVC (SWR) vent cowl.

S&F 110 mm PVC (SWR) bend any radius

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed

All as above herein before but 20 mm dia

S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

S&F, GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors.

S&F,20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store

S&F rotational moulded polethylene water tank of 500 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F rotational moulded polethylene water tank of 1000 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 142gms).

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed of 15mm dia pipe.

S&F in repairs floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floor , overall length of cover plate 150mm.

Welding in repairs exc 2.5 cm but n exc 5 cm in length , thickness of metal to be welded n exc 6mm for door,window,shutter etc. complete including taking down and efixing if required

Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F in repair PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S & F in repairs 300 mm size mild steel door springs including roller and roller plate complete.

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level)

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc.

M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 15mm thick rendering in CM 1:4 including rubbing and polishing complete

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 20mm thick screed bed in CM 1:6 complete..

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick rendering in CM 1:4.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

S&F 6 mm thickE-board ceiling laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 3 mm dia GI wire (upto 1200 mm in length) adjusting levels fixed to roof slabs/truss/purlin by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete.

S&F in repair fancy type curtain rod MS conduit rod PVC coated including fancy nob and ms bracket for hangging curtain rod complete all as specified and directed

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer

S&F in repair Aluminium Mortice lock 4 lever , size 75mm as all specified and directed

S&F in repair double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

Taking down and cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes,etc of capacity exc 500 & n exc 1000 litres and refixing the tank.

Taking down and cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes,etc of capacity exc 250 & n exc 500 litres and refixing the tank.

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.)/galvalume sheets in roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

M&L 6mm thick Asbestos Cement, one piece plain angular ridge in roof fixed with L Type or J type or crancked hook bolt etc

M&L 6mm thick Asbestos Cement, Corrugated or Semi corrugated sheets in roof, wall fixed with L Type or J type or crancked hook bolt etc

S&F 8 mm thick hollow type with stiffener inside & top/bottom layer of PVC sheet 0.5 mm thick any colour fixed to wall on solid PVC sheet 5 mm thick 50 mm wide @ 1 m c/c complete all as specified and dir

Taking down aluminium door/windows of any size and description and repair/replacement of parts such as beading, rubber gasket , floor spring , mortice lock etc and refixing in the same opening all as specified and directed.

Attending plumbing complaints only fixing item in repair and rectify defects i.e. flushing leakage from down pipe, flush handle , PVC connection, stop valves, leakage of bib taps, wall mixer, basin mixer, stop/angle cock, pipe line leakages, float valve, tank replacement etc including provision of all types of washers , thread , rubber cone, M-Seal, Spindle for Bib tap/Stop cock with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed .

Attending carpenter complaints only fixing item in repairs and rectify defects i.e. tightening of loose door/window/cupboard hinges and refixing of loose sliding bolts/tower bolts/handles, refixing of loose pelmet & curtain rod /brackets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plants and made functional to entire satisfaction complete all as specified and directed .

Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc.

M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in and including non metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings such as Bends Teess reducers etc and galvanized iron sheet steel terminal boxes/modular flush boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete.

All as per Item Ser no 137 above but for One light / Fan point controlled by one way switch complete all as specified and directed.

All as per Item Ser no 137above but for One Bell /Buzzer point controlled by one way switch complete all as specified and directed.

All as per Item Ser no 137 above but for One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.

All as per Item Ser no 137 above but for One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed.

All as per Item Ser no 137 above but for one light point controlled by two way switches complete all as specified and directed.

All as per item Ser No.137here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in existing conduit and galvanized iron sheet steel terminal boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete all as specified and directed.

All as per Item Ser no 138 above but forOne light / Fan point controlled by one way switch complete all as specified and directed.

All as per Item Ser no 138 above but for One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.

All as per Item Ser no 138 above but for One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed.

All as per item Ser No.138 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in Surface conduit/ Casing caping and gang box of 5A/15A including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete all as specified and directed.

All as per Item Ser no 143 above but forOne light / Fan point controlled by one way switch complete all as specified and directed.

All as per Item Ser no 143 above but for One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.

All as per Item Ser no 143 above but for One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed.

All as per item Ser No.143 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and fixing in replacement switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fixing in replacement socket out let sefty shutter 5 pin 5 Ampsflus type all as specified and directed.

Supply and fix in replacement bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing in replacement switch piano flush type one way 15 Amps SP complete all as specified.

Supply and fixing in replacement socket outlet polycarbonate 2 in 1 , 3 pin 5 / 15 Amps flush type complete all as specified and directed.

S& F in replacement swicth flush type 5 Amps single pole two way all as specified and directed.

S&F in replacement switch modular flush button single pole one way 15 Amp complete.

S&F socket in replacement out let 3 pin 5/15 Amp multipurpose, modular flush type 240 volt complete.

M & L for replacement of Step fan regulator modular type for ceiling fan of any sweep complete all as specified and directed by Engr-in-Charge.

S&F in replacement for lamp holder insulated body of PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed.

Supply and fixing in replacement bell ding-dong musical AC 230 Volts single pole complete all as specified and directed.

S & F in replacement high range up to 40 mtr , cordless call bell with wireless remote including batteries complete all as specified and as directed.

S&F in replacement Stepped type electronics fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and replace the Industrial laminated hylam sheet of 3 mm thick ISI marked (a) 250 mmx 200 mm

(b) 350 mm x 250 mm (As per Item No 162)

(c) 175 mm x 100 mm (As per Item No 162)

(d) 100 mmx 100 mm (As per Item No 162)

Supply and replace iron rectangular block for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick (a) 100 mm x 100 mm and 50 mm deep

(b) 175 mm x 100 mm and 50 mm deep (As per Item No 166)

(c) 250 mm x 200 mm and 50 mm deep (As per Item No 166)

(d) 350 mm x 250 mm and 50 mm deep (As per Item No 166)

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp/ offwhite suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable sizecomplete

Supply and fixing round shape 12 watt watt 220 volts ACrecessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling includingconnecting up with three core flexible copperconductor cable of suitable size complete.

Supply and fixing Square shape 300mm x 300mm 15 watt watt 220 volts AC recessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete.

Supply and fixing 12 watt luna LED ceiling light square colour cool white 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete.

Supply and fixing 175mm x 175mm ceiling light panel square white 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling includingconnecting up with three core flexible copperconductor cable of suitable size complete.

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holderconnecting up with three core flexible copperconductor cable of suitable size.

Supply and fix Modular White cover plates with frame 8 Module

Supply and fix Modular White cover plates with frame 6 Module

Supply and fix Modular White cover plates with frame 4 Module

Supply and fix Modular White cover plates with frame 3 Module

Supply and fix Modular White cover plates with frame 2 Module

Supply and fix recess mounting LED driver luminar suitable for 36 to 100 watts complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC 4 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete all as specified by Engr-In-Charge.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete.

Supply and fix in replacement wall mounted light fitting LED 10 watts with accessories including 01x10/9 watt LED bulb complete all as specified and as directed.

Suppply and fixing submain wiring with using two single core 6.0 SQmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI MArked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption buiolt in ccement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed .(Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit).

All as per item Ser No.26 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

All as per item Ser No.26 here in before but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

S&F PVC rectangular gang box multi purpose 5/15 Amps including making connections complete all as specified.

Supply and replace Rigid PVC casing & capping 20/25 mm wide

S&F PVC rectangular gang box multi purpose 5 Amps including making connections complete all as specified.

S&F socket out let 3 pin 5 amp multipurpose modular flash type.

S&F switch 6 Amp modular flush type 240 volt one way complete.

Taking down old unsv buildig security light fitting, Supply and fixing new energy saving LED light fitting 35 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by E-In-C.

M & L for GI Bracket made out of 25 mm GI Pipe light grade 1.20 m length bend to shape including clamps, nuts bolt and washer and fixing to wall/ floor complete as directed by Engr - in - Charge.

S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB TPN 100 Amps breaking capacity 10 KA 'B' series 415 volts 50 Hz complete all as specified and directed.

S&F MCB distribution board double door sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 4 Ways complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 12 Ways complete all as specified and directed.

S&F vertical three phase distribution board including MCCB 4 pole 100 Amps as incomer with three phase and single phase TP/SP as outgoing complete with insulated bus bar arrangement IP 43 protection with metal double door 4 way complete all as specified and as directed by Engr-In-Charge

Taking down the Geyser of capacity 25 / 50 Ltr including disconnecting of electric / water supply connections from building for repair / replacement of defective components and overhauling / checking, servicing , overhauling of inner tank , geyser element, checking of geyser assembly and setting of thermostat range complete and refixing the same after repair and testing including making electectric and water supply connection complete all as specified and directed by Engineer-in-charge. Note:- a) All safety precautions for the safety precautions for persons working during removal/fixing back of the Geyser shall be ensured by the contractor . Rates are inclusive of brazing of inner tank of copper for prevention of leakage and replacement of clamps nut bolts gasket set complete . b) Replacement of defective components, painting,etc., which shall be measured and paid for separately.

Supply and Fixing Heating element of capacity 2 kW (cap type / triangular / threaded type), ISI marked, suitable for geyser of capacity 25/50 Ltr complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in Replacement of neon Indicator lamp of red and green colour lamps suitable for geyser of capacity 25/ 50 Ltr of any type / make complete all as specified and directed by Engineer – in – charge

Supply and Fixing in Replacement of Thermostat assembly 16 A,240 AC, ISI marked, suitable for geyser of capacity 25/ 50Ltr of any type / make complete all as specified and directed by Engineer- in- charge .

Supply and Fixing in Replacement of PVC Helical (Hot / Cold) water connection pipe of size 450 mm x 15mm dia with two no of brass nut on each side for geyser complete all as specified and directed by Engineer – in – charge .

Supply and Fixing in Replacment of bottom plate of geyser in two pices including painting of approved colour suitable for 25/50 ltr capacity geyser as per original pattern and as approved by Engineer in charge complet all as specified and directed by Engineer – in – charge

Supply and Fixing in Replacment of (4 nos) ,16 mm dia nuts bolts of suitable length duly grouted in walls in cement mortar for fixing of geyser of any capacity complet all as specified and directed by Engineer – in – charge .

M & L for disconnecting the assembly from geyser and cleaning, repairing of defective parts and fixing the same complete all as specified and directed.

Supply and fixing replacement of old burnt geyser 25 Ltr complete with latest star rating(ISI Marked) PVC connection and complete fittings all as specified and directed by Engr-in-charge

Supply and fixing replacement of the geyser assembly 25 Ltr complete all as specified and directed.

Supply and fixing, Life savior plug 16 A (Plug top) with inbuilt RCD , Auto trip and visual indication of power, built in test and reset button complete all as specified and directed

Taking out damage glass wool from the geyser and supply fix glass wool all around the inner tank of geyser for maintaining the required temperature complet all as specified and directed by Engineer – in – charge

Taking down ceiling fans 48”/56” sweep, cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed .

Supply and fix in repairs 2.50 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs 4.00 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs ball bearing suitable for exsiting ceiling fans on site complete all as specified and as directed.

Supply and fix in repair ‘U’ clamps complete with nut, bolts & split pins Heavy duty suitable for existing ceiling fan complete all as specified and as directed.

Supply and fix in repair M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete all as specified and as directed.

Material and labour for rewinding of burnt fan motor with super enameled copper wire of suitable size 1200/1400mm sweep ceiling fan of any make, type, model including transporation (inclusive of material & labour) complete all as specified and as directed

S&F in replacement of old burnt fan1200 MM sweep with super enameled whitr colour copper binding of motor suitable size 1200mm sweep ceiling fan of any make, type, complete all as specified and as directed

M & L Painting of ceiling fans1200 mm /1400mm & Exhaust fans 250/300/450mm complete, in situwith synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Supply and fix Ball bearings suitable for existing exhaust fans as per site.

Supply and fix copper alloy Bush suitable for existing exhaust fans as per site.

Material and Labour for rewinding of exhaust fans 250/300 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed.

Supply & Fix in replacement switch and socket box type 15 Amp single pole two way (ISI marked) complete.

Supply and fix in replacement of Exhaust fan . Steel body ac single phase 230 volt of size 300mm sweep with blades and frame and louvers. Complete all as specified and directed

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

Supply and replace wire of Flexible cord with copper conductor multistanded of twin core 23/0.198

Supply and replace PVC copper wire of 2.5 sq mm complete all as specified and directed.

Supply only plug top 16 Amps ,3 Pin,230 Volts complete all as specified and directed.

Supply only plug top 6 Amps ,3 Pin,230 Volts complete all as specified and directed.

Supply and replace PVC copper wire of 1.5 sq mm complete all as specified and directed.

M/S CHAUHAN ELECTRIC WORKS (BID ID -3219804)

m/s udit constructions (BID ID -3225963)