UPGRADATION OF FORECOURT AREA AND PARKING AREA AT ITIMAD-UD-DAULLA TOMB, AGRA

Amount

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. (Rate including G.S.T.)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (Rate including G.S.T.)

Demolishing Lakhauri brick work in lime mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (Rate including G.S.T.)

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (Rate including G.S.T.)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (Rate including G.S.T.)

Provision for Shifting of Materials such as brick ballast and Red sand stone member etc. by Mechanical Transport including loading, unloading and stacking as per suitable site. (Rate including G.S.T.)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (Rate including G.S.T.)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) (Rate including G.S.T.)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) (Rate including G.S.T.)

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Rate including G.S.T.)

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in Superstructure with Cement mortar 1:4 (1 cement : 4coarse sand) (Rate including G.S.T.)

Providing and laying 75 mm thick Red Sand stone flooring chiseled dressed on top over 20mm. thick lime mortar (1 Lime, 1 Coarse Sand, 1 Surkhi). Matching to the Stone Shade, Pointing with same mortar and including supply of all materials, labour, T&P etc. required for proper completion of work. (including Pointing). (Rate including G.S.T.)

Providing and laying 80mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction ofEngineer-in-charge. (Rate including G.S.T.)

Providing & fixing of M.S. Grating over drain for cover near entrance Gate of required M.S. Angle iron for frames (65x65x6)mm size, & Panel frame (55x55x5 MM) having 40x40x5 mm M.S. Square Tube Pipe c/c distance 75 mm every Panel, and nut bolts, kabje including cutting fabricating welding and applying a priming coat of approved steel primer using structural steel etc. complete. (Rate including G.S.T.)

Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade: Red Sand Stone Member's Such as Bollards', circular type Kunda (bracket) for fixing of Mughal Pattern door. (Rate including G.S.T.)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) . (Rate including G.S.T.)

Providing & laying of 100 mm thick Red Sand Stone Slab for cover the drain including center position hole 75 mm dia in red sand stone slab for supply of water through of hole including supply of all materials, labour, T&P etc. required for proper completion of work. (Rate including G.S.T.)

18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. (Rate including G.S.T.)

Providing & Fixing Sliding Gate for Entrance of M.S. Square hollow tube Pipe of required pattern both side post size 80x80x6 mm thick supported with M.S. Plate Sheet 12 mm thick fixed with M.S. Bolt, Sliding frame size 60x60x5 mm including between vertical position c/c distance 1.00 mtr., having M.S. Square Pipe in vertical position size 40x40x5 mm c/c distance 10 cm between sliding frame gate, Sliding M.S. channel size 75x40 mm thick, and nut bolt, locking arragement etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (Rate including G.S.T.)

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 300 mm dia. (Rate including G.S.T.)

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia . (Rate including G.S.T.)

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. (Rate including G.S.T.)

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.(Rate including G.S.T.)

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. (Rate including G.S.T.)

Providing and fixing percolated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer in-charge. Thesheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purloins, rafters and trusses and includingcutting to size and shape wherever required.(Rate including G.S.T.)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Rate including G.S.T.)

Providing & fixing of M.S. Gate for Store Room Door of required pattern with M.S. Angle iron for Chaukhat frames (50x50x6)mm size, & door frame (40x40x6 MM) having 12 mm thick M.S. Square Bar c/c 10 cm and covered with iron mesh Jalie including supported for M.S. Flat 40x40x6 mm c/c 30 cm in horizontal position every door, and nut bolts including cutting fabricating welding and applying a priming coat of approved steel primer using structural steel etc. complete. (Rate including G.S.T.)

Providing and Laying of 75 mm thick Red Sand Stone Edging fine dresssed with fixed in cement concrete ratio 1:3:6 (1 Cement : 3 coarse sand (zone-III) with jointing cement mortar 1:5 (1 cement, 5 Coarse Sand). including supply of all materials, labour, T&P etc. required for proper completion of work. (Note:- the cost of cement concrete has been taken saparetly) (Rate including G.S.T.)

Lakhauri brick masonry/underpinning work in wall of required size matching to the site in lime mortar 1:1:1 (1 Lime, 1 Surkhi, 1 Coarse sand ) matching to the original including Materials, Labour's, Scaffolding & T&P etc. complete. ( Lakhuri bricks use 40 % collected against item no3, new 60%) (Rate including G.S.T.)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Rate including G.S.T.)

M/S HARISH SHARMA

M/s PAPPAN ELECTRIC AND GAS WELDING WORKS