Residential Quarters Padghe

Name of Package : Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track

Package No : CD01R

Specification No. : WR-I/C&M/SYE/I-2838:2023/NIT-xxx/Rfx- 500200xxxx

Completion Period 12 Months

: Attachments : General guidelines for filling up the Attachments "Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(QR), 4, 5, 6, 7, 8, 9, 9(IP), 10, 11, 12, 13, 14, 15, 16 and Bid Form for 1st Envelope are included here. Attach-15 is not applicable.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Proprietorship 1

Private Limited Company 2

Enter following details of the bidder Public Limited Company

Specify type of Bidder [Select from drop down menu]

Address of Registered Office

Specification No. :WR-I/C&M/SYE/I-2838:2023/NIT-xxx/Rfx- 500200xxxx Attachment-3(JV) CD01R CD01R

Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address (Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

Name(s) and Addresse(s) of other partner(s)

The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-3(QR)

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Qualifying Requirement Data

Bidder’s Name and Address (Bidder) :

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Dear Ladies and/or Gentlemen,

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & additional information required as per the Bidding Documents, we furnish herewith our QR data/details/documents etc., alongwith other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).

We are furnishing the following details/document in support of qualifying requirement for the subject package(s).

A Technical Experience

As enclosed in Qualifying Requirement document in the tender document at 1-3A-Annex A (BDS)-QR

A Bidder is Manufacturer

Authorised Dealer/Sub dealer

Name of Manufacturer Authorised Representative

Authorization of Manufacturer Submitted

Please submit relevent document Certificate of Authorized Dealership Submitted

B Technical Experience Authorization of Manufacturer Submitted

1 As per attached QR

Name of Manufacturer

2 Name of the Client

3 Address of Client

4 Contact Details of Client YES

5 Whether Client is having 400 kV or above Transmission System NO

Client should have 400 kV or above Transmission system

5 Documentary Evidence for above Uploaded Completion Certificate from Client

Please upload the Documentary Evidence Performance Report from Client

6 Purchase Order Details Acceptance of Final Bill by Client

Reference No. Certificate from CA

Date (dd-mm-yyyy) Any Other (Please Specify)

7 Make of Equipments supplied

7 Date of work done for AIS CB Equipped bays 220Kv or higher voltage (dd-mm-yyyy)

8 Proof of work done pertains to AIS CB Equipped bays 220Kv or higher voltage Uploaded Performance Report from Client

Please upload Proof of work done Any Other (Please Specify)

9 Document submitted as Proof of work done Specify document submitted as proof of Satisfactory Operation

10 Details of above Document

Date (dd-mm-yyyy)

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client

5 Work Order Details

6 Copy of Work order uploaded

7 Date of Completion of Work

8 Completed Amount of work (Rs)

please ent=IF(C41>=H49,IF(C74>=H49,"",IF(C74>=H50,"please enter 01 more work of 14 lakh and above","work insufficient")))er 01 more work of 14 lakh and above

7 Document submitted as Proof of Completion

8 Details of Document for Proof of Completion

11 Proof of Completion Uploaded

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client

5 Work Order Details

6 Copy of Work order uploaded

7 Date of Completion of Work

8 Completed Amount of work (Rs)

please ent=IF(C41>=H49,IF(C74>=H49,"",IF(C74>=H50,"please enter 01 more work of 14 lakh and above","work insufficient")))er 01 more work of 14 lakh and above

7 Document submitted as Proof of Completion

8 Details of Document for Proof of Completion

11 Proof of Completion Uploaded

B Financial Requirement - Performance Report from Client

As enclosed in Qualifying Requirement document in the tender document at 1-3A-Annex A (BDS)-QR Acceptance of Final Bill by Client

Certificate from CA

Any Other (Please Specify)

Sr. No. Financial Year Turnover (in Rs. Lakh) Copy of Balance Sheet & P/L Account Uploaded

Average Turnover for Best Three Years

C Statutory & General Requirements

PART-B : GENERAL (a) Following document shall be submitted by the bidder : ii) Copy of PAN Card iii) Copy of Partnership Deed/ Affidavit for Proprietorship/ Company MoA & AoA or Certificate of Incorporation, as applicable. iv) GSTIN Registration Certificate (b) POWERGRID, reserves the right to relax/waive of minor deviations with respect to QR as stipulated above, the decision of POWERGRID in this regard shall be final & binding on bidders. (c) POWERGRID reserves right to assess the capacity and capability of the bidder to successfully execute the contract, if felt necessary. This assessment may inter-alia include (i) document verification (ii) past experience and performance (iii) customer feedback (iv) bankers feedback (v) Litigation History YES

1 Copy of PAN Card Uploaded NO

Please upload Copy of PAN Card

2 Copy of Electrical contractor licence Uploaded

2 Status of the Bidder

3 Copy of GSTIN Registration Number

4 MOA & AOA/ Certificate of Incorporation Uploaded

5 Copy of Electrical Contractor License

Please upload Copy of Relavent document

Date : Printed Name :

Place : Designation :

Private Limited Company

Public Limited Company

Affidavit of Proprietorship Uploaded

Parnership Deed Uploaded

MOA & AOA/ Certificate of Incorporation Uploaded

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-4

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Form of Certificate of Origin and Eligibility

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

We hereby certify that equipment and materials to be supplied are produced in [Enter the name of country where from equipments & material shall be supplied] eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]

We hereby certify that our company is incorporated and registered in [Enter the name of country where from equipments & material shall be supplied] eligible source country.

Date : Printed Name :

Place : Designation :

country. country. [Enter the name of country where from equipments & material shall be supplied] [Enter the name of country where from equipments & material shall be supplied]

Specification No. :WR-I/C&M/SYE/I-2838:2023/NIT-xxx/Rfx- 500200xxxx Attachment-4(A) CD01R

Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

S.No. For Equipment Item Description Unit Quantity

Date : Printed Name :

Place : Designation :

Specification No. :WR-I/C&M/SYE/I-2838:2023/NIT-xxx/Rfx- 500200xxxx Attachment-4(B) CD01R

Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-4A

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Commentary on the Employer’s Technical Specifications

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Make of the Equipment Offered

Model of the Equipment Offered

The Bidder should comply with all the Technical Parameters mentioned in "Technical Specifications (Volume-II) of the bid documents and scanned copy of the same duly signed and stamped on all pages shall be uploaded by the bidder along with the bid.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-5

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-5

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : Printed Name :

Place : Designation :

Specification No. :WR-I/C&M/SYE/I-2838:2023/NIT-xxx/Rfx- 500200xxxx Attachment-8 CD01R

Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track

(Manufacturer's Authorization Form)

Contract Services

Power Grid Corporation of India Ltd.,

"Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001 Name of Manufecture Name/Description of Goods Factory Address Name & Address of Bidder package name alongwith project name

…(insert name of the Manufacturer) .. …(insert name and/or description of the goods) … ..(insert address of factory) .. Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at ..(insert address of factory) .., , , do hereby authorize , , , (hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track including the above plant & equipment or other goods produced by us.

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations.

We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract. ..(insert address of factory) .., , , do hereby authorize , , , (hereinafter, the “Bidder”) We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability).

For and on behalf of the …(insert name of the Manufacturer) .. to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track including the above plant & equipment or other goods produced by us. We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.

In the capacity of

Date : Printed Name :

Place : Designation :

Note :1 The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid.

2 Above undertaking shall be registered or notarized so as to be legally enforceable.

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-6

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Guarantee Declaration

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

We conform that the material offered shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-6B

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Declaration by the bidder for ‘Code of Integrity for Public procurement’

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

1.0 We have read the provisions of the bidding documents regarding abiding by the ‘Code of Integrity for Public Procurement’. Accordingly, we hereby declare that we shall abide by the ‘Code of Integrity for Public Procurement’ as mentioned under ITB Clause 36 of the Bidding Documents. The details of any previous transgressions of the code of integrity with any entity in any country during the last three years or of being debarred by any other Procuring Entity are as under: (a) (b) (c) 2.0 We also accept that in case of violation/transgression of this code by us in competing for or in executing the Contract, Employer has the right to take punitive measures as per the provisions of the Bidding Documents and/or POWERGRID’s policy and procedure.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-6 C

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Declaration regarding adherence to the POWERGRID Whistle Blower and Fraud Prevention Policy

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

We, hereby, declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the POWERGRID Whistle Blower and Fraud Prevention Policy. We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to our notice.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-7

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Information regarding Ex-employees of POWERGRID in our Organisation

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority.

Accordingle, We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

* In case the date of joining in the bidder's organization of such ex-employee is within 1 year from the date of retirement/ resignation from POWERGRID, No objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate / approval of the Competent Authority, as required, we understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard.

We further declare that any misrepresentation or submission of false / forged documents / information in this regard shall be dealt with as per the provisions of the Integrity Pact and / or the Bidding Documents and / or POWERGRID’s policy and procedures.

Date : Printed Name :

Place : Designation :

1) “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergridindia.com.

2) The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

3) In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-8

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Declaration regarding Social Accountability

Bidder’s Name and Address (Bidder) : To:

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-9

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Bidder’s Name and Address (Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Integrity Pact is annexed herewith this volume

Integrity Pact is Applicable

Date : Printed Name :

Place : Designation :

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Power Grid Corporation of India Limited

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as

having its Registered Office at

hereinafter referred to as

"The Bidder/Contractor"

Preamble POWERGRID intends to award, under laid-down organisational procedures, contract(s) for

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for "Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”" under Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 "Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 1 of 8

POWERGRID values full compliance with all relevant laws of the land, rules, regulations, economic use of resources, and of fairness/transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity, fairness and reason. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personal interest in the Companies/Agencies participating in the Bidding/Tendering process and all known prejudiced persons.

(2) If POWERGRID obtains information on the conduct of any of its employee which is a criminal offence under the IPC/PC Act, or if there be a substantive suspicion in this regard, POWERGRID will inform its Chief Vigilance Officer and in addition disciplinary actions can be initiated under POWERGRID's Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits itself to take all measures necessary to prevent corruption. The Bidder/Contractor commits itself to observe the following principles during his participation in the tender process and during the contract execution :

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 2 of 8

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal or undisclosed agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor shall not pass any information provided by POWERGRID as part of the business relationship to others and shall not commit any offence undre PC/IPC Act.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

g) The Bidder/Contractor shall ensure adoption of Integrity Pact by its sub-contractors and shall be responsible for the same.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures, ban/blacklist the Bidder/Contractor in line with POWERGRID's policy for " Blacklisting of Firms/Banning of Business" . The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The ban will be imposed for a maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID is entiltled for forfeiture of the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III or if POWERGRID is entltled to terminate the contract under Section III, POWERGRID shall be entltled to forfeit the Contract Performance Guarantee of this contract, in full or part thereof as may be decided, besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall disclose in its bid any itransgressions occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other company, in any country, that may impinge on the anti-corruption principle.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason and further action can be taken in line with POWERGRID's policies.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India. The names of IEMs has been indicated in the Bidding documents.

(2) The panel of IEMs shall review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. The panel of IEMs has right of access to all project documentation. The panel of IEMs may examine any complaint received by them and submit a report to Chairman-cum-Managing Director, POWERGRID, giving joint findings, at the earliest. The panel of IEMs may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He/She reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his/her request and demonstration of a valid interest, unrestricted and unconditional access to their documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract. The IEMs shall also sign declaration on 'Non-disclosure of Confidential Information" and of "Absence of Conflict of Interest". In case of any conflict of interest arising at a later date, the iEM shall inform Chairman-cum-Managing Director, POWERGRID and recuse himself/herself from that case.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he/she will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under PC/IPC Act, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 6 of 8

(9) While representing any matter in relation to the integrity pact inter-alia including its transgression to the panel of IEMs, POWERGRID and Bidder/contractor shall not approach the court of law and await the decision of the IEM in the matter.

(10) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing. Side agreements have not been made.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Issue like Warranty/Guarantees etc. shall be outsied the purview of IEMs.

(6) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation : …….. …… ………. …

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-10

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder’s Name and Address (Bidder) : To:

Power Grid Corporation of India Ltd.,

Name : Western Region -I Headquarters

Address : Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

I. We have read the provision in the Bidding Documents regarding furnishing the option for advance payment.

Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents,

we hereby confirm to opt the following:

Interest Bearing Initial Advance: Supply Portion

(Select from drop down list)

We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3 (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3 (b) Are you a MSE owned by SC/ST* enterpreuners in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order

3 (c) If 3(b) is 'Yes', please mention whether you are (Proprietory MSE/ Partenership MSE/ Private Limited Company) owned by SC/ST Enterpreneurs Yes Proprietory MSE

3 (d) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment/notification/order (Indicate Yes/No)

4. Permanent Account (PAN) No. No Partenership MSE

5 Work Contract Tax No. Private Limited Company

7 PF Registration No. of the Company

8 PF Regional Office covered (with Address)

9 Name of Contact Person

10 Telephone No(s)

11 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account:

Type of Account: Saving Account

12 9 digit MICR code printed at bottom in middle, next to cheque no.

13 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

* The definition of MSEs owned by SC/ST is as given under:

a. In case of Proprietory MSE, proprietor(s) shall be SC/ST.

b. In case of Partenership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited Companies, at least 51% share shall be held by SC/ST promoters.

Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-11

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Additional Information

Bidder’s Name and Address (Bidder) : To:

Power Grid Corporation of India Ltd.,

Name : Western Region -I Headquarters

Address : Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

In support of the additional information required as per ITB Sub-Clause 9.3(k) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

0.0 The Bidder shall furnish

0.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(k)(i)]

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

0.0 OTHER INFORMATION

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-12

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

Bidder’s Name and Address (Bidder) : To:

Power Grid Corporation of India Ltd.,

Name : Western Region -I Headquarters

Address : Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

I hereby declare that the documents submitted/uploaded by us to demonstrate the compliance to the specified Qualifying Requirement for this package are true, authentic and correct.

Further, we hereby confirm that except as mentioned in the Attachment -5 (Deviations) hereof , forming part of our First Envelope:

(i) there are no discrepencies/inconsistencies and deviations/omissions/reservations to the Bidding Documents, in the Second Envelope bid;

We also confirm that in case any discrepencies/inconsitencies and deviations/omissions/reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any finacial implication, whatsoever to POWERGRID. However, in case of any artithmetical errors, the same shall be governed as per the provisions of ITB Sub-clause 27.2 read in conjuction with BDS.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-13

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

(Declaration for tax exemptions, reductions, allowances or benefits)

Bidder’s Name and Address (Bidder) : To:

Power Grid Corporation of India Ltd.,

Name : Western Region -I Headquarters

Address : Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us

We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):"

Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any

(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-14

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

(Format for Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, 2017 and MoP Order December 2018, if applicable, to be provided on a non-judicial stamp paper of Rs. 100/-)

Bidder’s Name and Address (Bidder) : To:

Power Grid Corporation of India Ltd.,

Name : Western Region -I Headquarters

Address : Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Format for Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, 2017 if applicable, to be provided on a non-judicial stamp paper of Rs. 100/-. Date: -------------- I ________S/o, D/o, W/o, _____________________Resident of_________________________________________________________ hereby solemnly affirm and declare as under: That I will agree to abide by the terms and conditions of the Public Procurement (Preference to Make in India) Order, 2017 (hereinafter PPP-MII order) of Government of India issued vide Notification No:P-45021/2/2017 -BE-II dated 15/06/2017, its revision dated 28/05/2018, 'Public procurement (Preference to make in India) to provide for purchase preference (linked with local contenet) in respect of Transmission Power Sector Order dtd. 20.12.2018 issued by Ministry of Power (Hereinafter MoP Order December 2018) and any subsequent modifications/Amendments, if any and That the information furnished hereinafter is correct to the best of my knowledge and belief and I undertake to produce relevant records before the procuring entity/POWERGRID or any other Government authority for the purpose of assessing the local content of goods/services/works supplied by me for ……………………………………. (Enter the name of the package). That the local content for all inputs which constitute the said goods/services/works has been verified by me and I am responsible for the correctness of the claims made therein. That the goods/services/works supplied by me for ……………………………………. (Enter the name of the package) meet the ‘Minimum Local Content ‘as defined in the PPP-MII order and MoP Order December 2018 for FY 2018-19 and value of Minimum Local Contenet (In %) to be achieved 'Over the next five years in phased manner' as specified in the MoP Order December 2018. That the value addition for the purpose of meeting the ‘Minimum Local Content ‘has been made by me at ……………………… (Enter the details of the location(s) at which value addition is made).

That in the event of the local content of the goods/services/works mentioned herein is found to be incorrect and not meeting the prescribed Minimum Local Content criteria, based on the assessment of procuring agency (ies)/POWERGRID/Government Authorities for the purpose of assessing the local content, action shall be taken against me in line with the PPP-MII order, MoP Order December 2018 and provisions of the Integrity pact/ Bidding Documents. I agree to maintain the following information in the Company's record for a period of 8 years and shall make this available for verification to any statutory authority. i Name and details of the Local Supplier (Registered Office, Manufacturing unit location, nature of legal entity) ii. Date on which this certificate is issued iii. Goods/services/works for which the certificate is produced iv. Procuring entity to whom the certificate is furnished v. Percentage of local content claimed and whether it meets the Minimum Local Content prescribed vi. Name and contact details of the unit of the Local Supplier (s) vii. Sale Price of the product viii Ex-Factory Price of the product ix. Freight, insurance and handling x. Total Bill of Material

xi List and total cost value of input used to manufacture the Goods/to provide services/in construction of works xii. List and total cost of input which are domestically sourced. Value addition certificates from suppliers, if the input is not in-house to eb attached xiii. List and cost of inputs which are imported, directly or indirectly For and on behalf of……………………………………………… (Name of firm/entity) Authorized signatory (To be duly authorized by the Board of Directors) <Insert Name, Designation and Contact No.>

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-15

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

(Certificate from statutory auditor or cost auditor of the company )

(NOT APPLICABLE)

Bidder’s Name and Address (Bidder) : To:

Power Grid Corporation of India Ltd.,

Name : Western Region -I Headquarters

Address : Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable [to be submitted on the letter head of the issuer.] Dear Sir, We have read and understood the provisions of “Public Procurement (Preference to Make in India) Order, 2017” dated 15/06/2017, its revision dated 28/05/2018 and any subsequent modifications/Amendments, if any [hereinafter, “PPP-MII Order”] issued by Department of Industrial Policy and Promotion (DIPP), Ministry of Commerce and Industry, Government of India. In line with the provisions of the PPP-MII Order, M/s. ………[Enter the name of the Bidder] [hereinafter, “Local Supplier”] have submitted an Affidavit of self-certification to M/s. Power Grid Corporation of India Limited [hereinafter, POWERGRID] regarding Local Content in Goods/Services/Works to be supplied by the Local Supplier for ……………… [Enter the name of the package], wherein they have agreed to abide by the terms and conditions of the PPP-MII Order.

Further, in line with the PPP-MII Order, the statutory auditor or cost auditor of the company (in the case of companies) or a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) shall provide a certificate giving the percentage of Local Content in the Goods/Service/Works to be supplied by the Local Supplier for ……………… [Enter the name of the package]. Accordingly, we, the Statutory Auditor(s) / Cost auditor (applicable in the case of companies) of the Local Supplier / a practicing cost accountant or practicing chartered accountant (applicable in respect of suppliers other than companies), certify that the Local Content as defined under the PPP-MII, in the Goods/Service/Works to be supplied by the Local Supplier for ……………… [Enter the name of the package] is ……….. percentage [specify the percentage of Local content ]. For and on behalf of, Date: <<Statutory Auditor’s/ Cost auditor’s/ Cost accountant’s/ Chartered accountant’s attestation>> Firm Reg No. Membership No. Note: This is a guiding format. In case the bidder submits the certificate in a format different from the above, the same may be considered provided it meets the intent and purpose, as may be ascertained by POWERGRID.

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Attachment-16

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”"

(Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA)

Bidder’s Name and Address (Bidder) : To:

Power Grid Corporation of India Ltd.,

Name : Western Region -I Headquarters

Address : Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No. 5 five 5 th 5 May

Date : 6 six 6 th 6 June

7 seven 7 th 7 July

To: 8 eight 8 th 8 August

Power Grid Corporation of India Ltd., 9 nine 9 th 9 September

Western Region -I Headquarters 10 ten 10 th 10 October

Sampriti Nagar, Nari Ring Road 11 eleven 11 th 11 November

PO: Uppalwadi, Nagpur (MS) -440026 12 twelve 12 th 12 December

13 thirteen 13 th

14 fourteen 14 th

Name of Contract : "Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”" 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

0.0 Having examined the Bidding Documents, including Amendment Nos. NIL dated NA the receipt of which is hereby acknowledged, we the undersigned, offer to execute the work under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). NIL NA the receipt of which is hereby acknowledged, we the undersigned, offer to execute the work under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th

0.0 Attachments to the Bid Form (First Envelope) (Attachment-15 not applicable) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if amount B17of bid security is less than 2263000, your bid may be rejected Bank Guarantee (0) 21 st

(c) Attachment 3 The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th

Applicable 23 th

Not Applicable 24 th

(d) Attachment 4 The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. 25 th

(e) Attachment 5 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 26 th

(f) Attachment 6 A Guarantee Declaration 27 th

B Declaration by the bidder for ‘Code of Integrity for Public procurement’

C Declaration regarding adherence to the POWERGRID Whistle Blower and Fraud Prevention Policy

(g) Attachment 7 Information regarding ex-employees of Employer in Bidder’s firm 28 th

(h) Attachment 8 Declaration regarding Social Accountability 29 th

(i) Attachment 9 Integrity Pact - 30 th

(j) Attachment 10 Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise) 31 st

(k) Attachment 11 Additional Information

(l) Attachment 12 Declaration

(m) Attachment 13 Declaration for tax exemptions, reductions, allowances or benefits

(n) Attachment 14 Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, if applicable

(o) Attachment 15 Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable----NOT APPLICABLE

(p) Attachment 16 eRA

0.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

0.0 We declare that as specified in Clause 11.10, Section –II:ITB, Vol.-I of the Bidding Documents, the RATES of all the Goods to be supplied under this contract shall remain FIRM during the currency of the contract and no price adjustment shall be applicable..

0.0 Construction of the Contract

0.9 We declare that we have studied relevant clausesrelating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services.

0.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) ITB 13 Bid Security

(b) GCC 8.0 Terms of Payment

(c) GCC 24.0 Performance Security

(d) GCC 10.0 Taxes and Duties

(e) GCC 21.0 Completion Time Guarantee

(f) GCC 22 Defect Liability

(g) GCC 25 Patent Indemnity

(h) GCC 38 Settlement of Disputes

(i) GCC 39 Arbitration

0.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification/Letter of Award to us, and to achieve the completion of works and related services within the time stated in the Bidding Documents.

0.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

0.0 We agree to abide by this bid for a period of 180 days from the date initially stipulated for opening of bids (first envelope) as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

0.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

0.0 We understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : Printed Name :

Place : Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Note: If there are the statement of declerations shall be accepated and submitted. In case Decleration statement is blank/not submitted same construed as accepated/submitted without deviations. In case bidder does not upload the Attachment and Bid Form/declerations on the website, it shall be construed to be accepated declerations.

ElectronicForms™

View - Template of ElectronicForm™

To close this Screen, click on the [Close] button located on the bar above, or at the bottom of the Screen

Template of ElectronicForm™

Relevant Bid-Part Techical

ElectronicForm™ Template ID 7PG-2010-FT000010

Template Reference TECHNO-COMMERICIAL (First Envelope)

Template Description Tower Package CD01R Specification No. : WR-I/C&M/SYE/I-2838:2023/NIT-xxx/Rfx- 500200xxxx

Supply of Insulator, E/W & OPGW including Hardware & accessories and Execution of erection works for diversion / shifting works of existing 765 KV D/C Durg - Wardha TL -1, 400 kV D/C (Twin) Raipur - Bhadrawati TL- 2 & 3, 400 kV D/C Bhilai/Raipur Bhadrawati TL- 1 Transmission Lines for construction / development of Wadsa-Gadchiroli new Broad gauge Railway track

Section-2 (Outline of Requirements)

* 1 Integrity Pact Details

Submitted (Doc. Code No. DC-9008-April-2009-Rev-0) Yes

* 2 BID SECURITY DETAILS

2 (a) Submitted Yes

* 2 (b) Bid Security No.

* 2 (c) Issued by (Name of Bank)

* 2 (d) Bid Security Amount

* 2 (e) Valid upto

* 1. AUTHORIZED SIGNATORY (Sole Bidder / Lead Partner of JV)

1 (b) Designation

2. AUTHORIZED SIGNATORY (Other Partner of JV)

(If Bidder is JV)

2 (b) Designation

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

23 twenty three

27 twenty seven

28 twenty eight

33 thirty three

37 thirty seven

38 thirty eight

73 seventy three

74 seventy four

75 seventy five

77 seventy seven

78 seventy eight

79 seventy nine

83 eighty three

87 eighty seven

88 eighty eight

93 ninety three

97 ninety seven

98 ninety eight

Enter basic data here

[Fill up data only in the relevent open area]

1 Name of Package

2 Specification No.

4 Item Description ACSR ZEBRA Conductor

5 Quantity in km. 6615

6 Type Tests Tests to be conducted Nos of tests

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757

1 Fill up only green shaded cells in Sch-1, Sch-2, Sch-3 & Discount.

2 All the cells in Sch-5 are auto filled, therefore no cell is required to be filled up there.

3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.

4 The price quoted in respect of all items shall be excluding GST applicable on transaction between the Employer and the Contractor

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Manufacturer 1

Authorized Dealer/ Sub-dealer of Manufacturer 2

Enter following details of the bidder Authorized Representative of Manufacturer

Specify type of Bidder [Select from drop down menu] #REF!

Name of Manufacturer

PhoneNo/ Mobile No.

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

(SCHEDULE OF RATES AND PRICES : - Scheduled Items ) PART A

Bidder’s Name and Address To:

Bidder as Contract & Material

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

All values are in Indian Rupees.

SI. No. Item No. Item Description Unit Qty. Rate Amount

PART - B - SCHEDULE ITEMS: (As per DSR 2023)

GROUP - EARTHWORK -

1 1.1 Carriage of material by mechanical transport including loading, unloading and stacking ,within a lead of 1km.

1.1.4 Excavated Rock Cum 129.00 0.00

2 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. 0.00

2.6.1 All kinds of soil Cu.m. 694.00 0.00

3 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. 0.00

2.7.1 Ordinary rock Cu.m. 50.00 0.00

4 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 0.00

2.8.1 All kinds of soil. Cu.m. 795.00 0.00

5 2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 0.00

2.9.1 Ordinary rock Cu.m. 50.00 0.00

6 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 0.00

2.10.1 All kinds of soil. 0.00

2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 392.00 0.00

7 2.13 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : 0.00

2.13.1 Ordinary rock : 0.00

2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia metre 20.00 0.00

8 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cu.m. 913.00 0.00

9 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. 0.00

2.26.1 All kinds of Soil Cu.m. 130.00 0.00

2.26.2 Ordinary or hard rock Cu.m. 73.00 0.00

10 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. 0.00

2.34.1 Chlorpyriphos - Lindane emulsifiable concentrate of 20% Litres 2020.00 0.00

11 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 0.00

2.35.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 0.00

2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration meter 445.00 0.00

12 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 0.00

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration Sq.m. 832.00 0.00

GROUP - CONCRETE WORK - 0.00

13 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 0.00

13.1 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). Cu.m. 10.00 0.00

13.2 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) Cu.m. 213.00 0.00

14 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 0.00

4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Cu.m. 10.00 0.00

15 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 0.00

4.3.1 Foundations, footings, bases for columns . Sq.m. 100.00 0.00

16 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). Sq.m. 222.00 0.00

17 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. per 50kg cement 76.00 0.00

18 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm. 222.00 0.00

GROUP - RCC WORK 0.00

19 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 0.00

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). Cu.m. 730.00 0.00

20 5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 0.00

5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). Cu.m. 61.00 0.00

21 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). Cum 335.00 0.00

22 5.8 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). Cu.m. 2.00 0.00

23 5.9 Centering and shuttering including strutting, propping etc. and removal of form for : 0.00

23.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sq.m. 685.00 0.00

23.2 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sq.m. 334.00 0.00

23.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform Sq.m. 1575.00 0.00

23.4 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers Sq.m. 2025.00 0.00

23.5 5.9.6 Columns, pillars, piers abutments posts & struts Sq.m. 1145 0.00

23.6 5.9.7 Stairs ,excluding landings, except spiral staircases. Sq.m. 7.00 0.00

23.7 5.9.13 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. Sq.m. 105.00 0.00

23.8 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like Sq.m. 125.00 0.00

23.9 5.9.19 Weather shade, chajjas, corbels etc. including edges. Sq.m. 140.00 0.00

24 5.18 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 0.00

25 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 0.00

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kilogram 59305.00 0.00

26 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 0.00

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kilogram 30286.00 0.00

27 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. meter 535.00 0.00

28 5.47 Providing and fixing in position factory made precast RCC M-40 doors and windows frames having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. (The cost of hold fast and cc block of 1:3:6 mix is also included in the item.) The frame shall be measured in running meter correct to two places of decimal. 0.00

28.1 5.47.1 Door frame 125 mmx 60 mm metre 380.00 0.00

28.2 5.47.2 Door frame 100 mmx 60 mm metre 661.00 0.00

29 6.15 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. Sq.m. 1360.00 0.00

GROUP - MARBLE WORK - GRANITE WORK 0.00

30 8.2 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Note : window sill also included in this item) 0.00

8.2.2 Granite of any colour and shade 0.00

30.1 8.2.2.1 Area of slab upto 0.50 Sq. m. Sq.m. 97.00 0.00

30.2 8.2.2.2 Area of slab over 0.50 Sq. m. Sq.m. 111.00 0.00

31 8.3 Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 0.00

8.3.2 Granite work meter 750.00 0.00

32 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. metre 118.00 0.00

33 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 28.00 0.00

GROUP - WOOD WORK 0.00

34 9.7 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 0.00

9.7.7 Float glass panes 0.00

34.1 9.7.7.1 4 mm thick glass pane Sq.m 171.00 0.00

34.2 9.7.7.2 5.5 mm thick glass panes Sq.m 201.00 0.00

35 9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 0.00

9.21.1 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws. Sq.m 286.00 0.00

36 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Sq.m 286.00 0.00

37 9.46 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 0.00

38 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete. 0.00

9.48.2 Fixed to openings/wooden frames with rawl plugs screws etc. Kg. 3600.00 0.00

39 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised ,anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with nuts and screws etc. complete: 0.00

40 9.97 Providing and fixing aluminium tower bolts ISI marked anodised ,anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with necessary screws etc. complete: 0.00

41 9.100 Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with necessary screws etc. complete. 0.00

42 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 0.00

9.101.2 Twin rubber stopper Each 145.00 0.00

43 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer’s specification and direction of Engineer-in-charge. 0.00

9.142.1 Non decorative finish (matt finish) Sq.m. 111.00 0.00

44 9.147A Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds 0.00

9.147A 1.2 Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto1.8m). Sq.m. 212.00 0.00

9.147A 4.2 Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). Sq.m. 112.00 0.00

9.147C 2.2 Fixed window / ventilator with mullion / transom. Using R2 series with frame (39 mm & above ) x (39 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre) Sq.m. 49.00 0.00

9.147F1.1 Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre). Sq.m. 12.00 0.00

47 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 0.00

10.16.1 Hot finished welded type tubes kg 100.00 0.00

48 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Each 117.00 0.00

49 10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 0.00

10.25.2 In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. Kgs. 1070.00 0.00

50 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. 0.00

51 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg 400.00 0.00

GROUP - FLOORING WORK 0.00

52 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 0.00

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 100.00 0.00

53 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 0.00

54 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. sqm 115.00 0.00

55 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. metre 255.00 0.00

56 11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre sqm 115.00 0.00

57 11.37A Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.m. 1200.00 0.00

58 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Sq.m. 357.00 0.00

59 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 0.00

11.41.2 Size of Tile 600x600 mm Sq.m. 1239.00 0.00

60 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. 0.00

11.46.2 Size of Tile 600x600 mm Sq.m. 146.00 0.00

GROUP - ROOFING WORK 0.00

61 12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sq.m. 388.00 0.00

62 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 0.00

12.21.1 In 75x75 mm deep chase metre 552.00 0.00

63 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 39.00 0.00

GROUP - FINISHING WORK 0.00

64 13.4 12 mm cement plaster of mix 0.00

13.4.2 1:6 (1 cement - 6 coarse sand) Sq.m. 2143.00 0.00

65 13.5 15 mm cement plaster on rough side of single or half brick masonry wall of mix: 0.00

13.5.2 1:6 (1 Cement:6 coarse sand) Sq.m. 5125.00 0.00

66 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix : 0.00

13.7.2 1:4 (1 cement: 4 fine sand) Sq.m. 30.00 0.00

67 13.11 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1Cement:5 Coarse sand) finished with top layer 6mm thick cement plaster 1:6 (1 Cement:6 Fine sand). Sq.m. 3605.00 0.00

68 13.16 6mm cement plaster of mix. 0.00

13.16.1 1:3 (1 cement : 3 fine sand) Sq.m. 3115.00 0.00

69 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Per bag of 50 kg cement used in the mix 290.00 0.00

70 13.24 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 0.00

13.24.1 In one coat Sq.m. 124.00 0.00

71 13.26 Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete Sq.m. 10385.00 0.00

72 13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 0.00

13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre Sq.m. 10385.00 0.00

73 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 0.00

13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre Sq.m. 10385.00 0.00

74 13.45 Finishing walls with textured exterior paint of required shade : 0.00

13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Sq.m. 50.00 0.00

75 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 0.00

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Sq.m. 3605.00 0.00

76 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 0.00

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sq.m. 907.00 0.00

77 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.m. 4005.00 0.00

78 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 0.00

13.83.2 Two coats Sq.m. 1210.00 0.00

79 16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Sq.m. 161.00 0.00

80 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 0.00

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Each 25.00 0.00

81 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 0.00

17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. Each 16.00 0.00

17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 30.00 0.00

82 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 0.00

17.10.1 Kitchen sink with drain board 0.00

17.10.1.3 510x1040 mm bowl depth 200 mm Each 21.00 0.00

83 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 0.00

17.28.1 Semi rigid pipe 0.00

84 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 46.00 0.00

85 17.35 Providing and fixing soil, waste and vent pipes: 0.00

17.35.1.2 Centrifugally cast -Spun, iron Socketed pipe as per IS - 3989 Mtrs. 530.00 0.00

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989. Mtrs. 360.00 0.00

86 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 0.00

17.37.1 For 100 mm dia pipe Each 110.00 0.00

17.37.2 For 75 mm dia pipe Each 80.00 0.00

87 17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 0.00

17.38.1.2 Sand Cast Iron S&S pipe as per IS- 3989 Each 36.00 0.00

17.38.2.2 Sand Cast Iron S&S pipe as per IS- 3989 Each 34.00 0.00

88 17.39 Providing and fixing plain bend of required degree 0.00

17.39.1.2 Sand Cast Iron S&S pipe as per IS- 3989 Each 32.00 0.00

17.39.2.2 Sand Cast Iron S&S pipe as per IS- 3989 Each 30.00 0.00

89 17.40 Providing & fixing heel rest sanitary bend - 0.00

17.40.1.2 Sand Cast Iron S&S pipe as per IS- 3989 Each 36.00 0.00

17.40.2.2 Sand Cast Iron S&S pipe as per IS- 3989 Each 34.00 0.00 #REF!

90 17.43 Providing & fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick bolts and nuts complete. 0.00

17.43.1.2 Sand Cast iron S&S pipe as per IS-3989 Each 38.00 0.00

17.43.2.2 Sand Cast iron S&S pipe as per IS-3989 Each 36.00 0.00

91 17.56 Providing and fixing terminal guard 0.00

17.56.1.2 Sand Cast iron S&S pipe - as per IS-3989 Each 42.00 0.00

17.56.2.2 Sand Cast iron S&S pipe - as per IS-3989 Each 34.00 0.00

92 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 0.00

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 400.00 0.00

17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket Each 230.00 0.00

93 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 0.00

17.60.2 100 mm inlet and 75 mm outlet 0.00

17.60.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 35.00 0.00

94 17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 0.00

17.65.1 100 mm dia. Pipe Mtrs. 530.00 0.00

17.65.2 75 mm dia. Pipe Mtrs. 300.00 0.00

95 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 0.00

17.70.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Each 53.00 0.00

17.70.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. Each 21.00 0.00

97 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 0.00

17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Each 30.00 0.00

98 17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. Each 16.00 0.00

99 17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 25.00 0.00

GROUP: Water Supply 0.00

100 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 0.00

18.7.3 25 mm nominal outer dia Pipes Meter 70.00 0.00

18.7.4 32 mm nominal outer dia Pipes Meter 260.00 0.00

101 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 0.00

18.8.2 20 mm nominal outer dia Pipes Meter 157.00 0.00

18.8.3 25 mm nominal outer dia Pipes Meter 327.00 0.00

102 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 0.00

18.9.3 25 mm nominal outer dia Pipes Meter 160.00 0.00

18.9.4 32 mm nominal outer dia Pipes Meter 220.00 0.00

18.9.6 50 mm nominal outer dia Pipes Meter 380.00 0.00

18.9.8 80 mm nominal inner dia Pipes Meter 380.00 0.00

103 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 0.00

18.17.1 25 mm nominal bore Each 52.00 0.00

18.17.2 32 mm nominal bore. Each 13.00 0.00

18.17.4 50 mm nominal bore Each 5.00 0.00

18.17.6 80 mm nominal bore Each 4.00 0.00

104 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 0.00

18.18.3 25 mm diameter nominal bore Each 37.00 0.00

105 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 0.00

18.19.4.1 Horizontal 50 mm nominal bore Each 3.00 0.00

18.19.6.1 Horizontal 80 mm nominal bore Each 3.00 0.00

106 18.20 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 0.00

18.20.3 25 mm nominal bore Each 6.00 0.00

107 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 0.00

18.21.2 45 cm length 0.00

18.21.2.1 15 mm nominal bore Each 260.00 0.00

108 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 0.00

18.22.2 150 mm diameter Each 52.00 0.00

109 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 0.00

18.46.3 25 mm nominal bore Each 32.00 0.00

18.46.4 32 mm nominal bore Each 32.00 0.00

18.46.6 50 mm nominal bore Each 32.00 0.00

18.46.8 80 mm nominal bore Each 6.00 0.00

110 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 0.00

18.48A Circular tank per litre 24000.00 0.00

111 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 0.00

18.49.1 15 mm nominal bore Each 52.00 0.00

112 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 0.00

18.51.1 15 mm nominal bore Each 134.00 0.00

113 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 0.00

18.52.1 15 mm nominal bore Each 134.00 0.00

114 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 0.00

18.53.1 15 mm nominal bore Each 134.00 0.00

115 18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 0.00

GROUP: ROAD AND DRAINAGE 0.00

116 16.1 Preparation and consolidation of sub grade with power road roller of 8 to12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. sqm 550.00 0.00

117 16.3 Supplying and stacking at site. 0.00

16.3.1 90 mm to 45 mm Size stone aggregate cum 137.00 0.00

16.3.2 63 mm to 45 mm size stone aggregate cum 52.00 0.00

16.3.6 Stone Screenings 13.2mm nominal size (type A) cum 38.00 0.00

16.3.10 Moorum cum 15.00 0.00

118 16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . cum 152.00 0.00

119 16.45 Providing and fixing in position pre-moulded joint filler in expansion joints. per cm depth per cm width per m length 1270.00 0.00

120 16.46 Providing and laying in position bitumen hot sealing compound for expansion joints etc. 0.00

16.46.1 Using grade 'A' sealing compound per cm depth per cm width per m length 425.00 0.00

121 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge. 0.00

16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. sqm 180.00 0.00

122 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 0.00

19.6.2 150 mm dia. R.C.C. pipe meter 18.00 0.00

GROUP: SEWERAGE -DRAINAGE, 0.00

123 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00

19.1.1 100 mm diameter Meter 79.00 0.00

19.1.2 150 mm diameter Meter 391.00 0.00

124 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 0.00

19.2.1 100 mm diam. S.W pipe Meter 79.00 0.00

19.2.2 150 mm diam. RCC pipe Meter 391.00 0.00

125 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 0.00

19.6.4 300 mm dia RCC pipes. Meter 20.00 0.00

126 19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 0.00

19.15.1 With 20x20 mm square bar Each 65.00 0.00

127 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 0.00

21.8.1 Upto 5mm depth and 5 mm width metre 1140.00 0.00

128 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 0.00

21.1.1 For fixed portion 0.00

21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 50.00 0.00

129 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Sq.m. 404.00 0.00

130 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 0.00

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sq.m. 1412.00 0.00

131 23.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. cum 200.00 0.00

GROUP: DEMOLISHING AND DISMANTLING WORK 0.00

132 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. cum 10.00 0.00

133 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar cum 15.00 0.00

134 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 1.00 0.00

15.12.2 Of area beyond 3 sq. metres each 1.00 0.00

135 15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore metre 30.00 0.00

15.44.2 Above 40 mm nominal bore meter 10.00 0.00

136 14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. each 2.00 0.00

137 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. sqm 5.00 0.00

138 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. sqm 5.00 0.00

139 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum 30.00 0.00

Total for PART-A-Schedule items (Excluding GST) : 0.00

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Schedule - 2

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

SCHEDULE OF RATES AND PRICES : PART-B- Non Scheduled Items

Bidder’s Name and Address To:

Bidder as Contract & Material

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

All values are in Indian Rupees.

SI. No. Item no. Item Description Unit Qty. Rate Amount

PART-B: Non Scheduled Items

PART-B NON-SCHEDULE ITEMS 0.00

1 NS-1 Masonry work with Fly Ash bricks of average compressive strength of 50Kg/cm2 in foundation and plinth level in cement mortar 1:6 (1 cement :6coarse sand). Cu.m. 50.00 0.00

2 NS-2 Masonry work with Fly Ash bricks of average compressive strength of 50 Kg/cm2 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement:6coarse sand). Cu.m. 693.00 0.00

3 NS-3 Half brick masonary with Fly Ash bricks of average compressive strength of 50 Kg/cm2 in super structure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand) Sq.m. 1349.00 0.00

4 NS-4 Providing and fixing wooden moulded beading to doors and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete. 0.00

2nd Class teak wood 0.00

5 NS-5 Providing & fixing stainless steel jali (grating) with or without hole for waste pipe for floor/Nahani trap instead of SCI/CI grating as per trap item 100 mm dia weight not less than 100 gms. each 123.00 0.00

6 NS-6 Providing and fixing wire gauge shutters using Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50 mm dia wire for doors, windows and clerestory windows with hinges and necessary screws: - 0.00

35 mm thick shutters. 0.00

With ISI marked stainless steel butt hinges of required size. 0.00

Second class teak wood. Sq.m. 135.00 0.00

7 NS-7 Providing & laying in sunken floor upto floor V level lime concrete with graded brick aggregate 40 mm nominal size and 50 % mortar comprising of 1 lime putty:2 surkhi. Cu.m. 51.00 0.00

8 NS-8 Providing & fixing rubber shock absorbers of minimum 25 mm dia and 40 mm length to be fixed on back side of door including screws etc. all complete. No. 187.00 0.00

9 NS-9 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) with RCC top slab with 1:2:4 mix (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement morter 1:3(1 cement :3coarse sand) finished with a floating coat of neat cement and makig channel in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design of CPWD. (Excavation and External Plaster shall be paid separately) 0.00

(A) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455mm x 610 mm internal dimensions total wt. of cover and frame to be not less than 38 kg. (wt. of the cover 23 kg and wt. of the frame 15 kg.)- With Fly Ash bricks of average compressive strength of 50 Kg/cm2 Each 31.00 0.00

(B) Inside size 120X90 cm and 90cm deep including C.I. Cover with frame (medium duly) 500mm internal dimensions, total weight of cover and frame to be not less than 116 Kg (weight of cover 58 Kg and and weight of frame 58 Kg) - With Fly Ash bricks of average compressive strength of 50 Kg/cm2 Each 16.00 0.00

10 NS-10 Extra for depth for manholes 0.00

(A) Size 90cm x 80 cm with Fly Ash bricks of average compressive strength of 50Kg/cm2. Meter 9.00 0.00

(B) Size 120cm x 90 cm with Fly Ash bricks of average compressive strength of 50Kg/cm2. Meter 8.00 0.00

11 NS-11 Constructing masonry chamber 30 x 30 x 50 cm inside with 50 class designation brick work in cement mortar 1:5 (1 cement: 5fine sand), for stop cock with CI surface box 100 mm x 100 mm x 75 mm (inside) with hinged cover fixed in RCC top slab 1:2:4 (1 cement :2 couse sand : graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10(1 cement :2 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement morter 1:3 (1 cement :3 course sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design of CPWD. (Excavation and External Plaster shall be paid separately) 0.00

With Fly Ash bricks of average compressive strength of 50 Kg/ cm2 Each 8.00 0.00

12 NS-12 Providing & fixing square - mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside). The weight of cover to be not less than 4.50 kg & frame to be not less than 2.70 kg as per standerd design of CPWD. (Excavation shall be paid separately) 0.00

180 x 150 mm size P type 0.00

With Fly Ash bricks of average compressive strength of 50 Kg/cm2 Each 33.00 0.00

13 NS-13 Providing and fixing under counter storage in kitchen about 500 to 600mm deep with drawers on top with telescopic channels and openable shutters below made out of 18 mm. thk BWP ply board at end verticals, top, bottom, shutters, partition etc complete as per approved drawing. The rear side of the unit shall be made with 6mm thk Commercial ply board,which shall have synthetic enamel paint over primer coat on the rear face. Inner surface of the storage cabinet shall be finished with 0.8mm thk approved laminate. The exterior face of the storage unit shall be finished with 1 mm thk laminate as approved by Engineer-in- charge. All handles shall be 125mm of brass. 0.00

The unit shall have necessary fittings such as tower bolts, magnetic catcher etc. wherever required etc complete. All wood-work, BWP ply board & frames to have coat of anti termite of approved make before lamination / veneering. Rates include teak wood lipping, moulding, lamination, all hardware etc required for complete execution of work. Nothing extra shall be payable on this account. (Front face shall be measured for payment) Sqm 66.00 0.00

14 NS-14 Providing and fixing over head storage in kitchen about 350 to 400mm deep and 600mm high with openable shutters and partitions made out of 18 mm. thk BWP ply board at end verticals, top, bottom, shutters, partition etc complete. The rear side of the unit shall be made with 6mm thk Commercial ply board ,which shall have synthetic enamel paint over primer coat on the rear face. Inner surface of the storage cabinet shall be finished with 0.8mm thk approved laminate. The exterior face of the storage unit shall be finished with 1 mm thk laminate as approved by Engineer-in-charge. All handles shall be 125mm of brass. 0.00

The unit shall have necessary fittings such as tower bolts, magnetic catcher etc. wherever required etc complete. All wood-work, BWP ply board & frames to have coat of anti termite of approved make before lamination / veneering. Rates include teak wood lipping, moulding, lamination, all hardware etc required for complete execution of work. Nothing extra shall be payable on this account. (Front face shall be measured for payment) Sqm 60.00 0.00

15 NS-15 Providing and fixing wardrobes about 600 mm deep as per approved drawing is made out of 18 mm. thk Commercial board at end verticals, top and bottom, shutters, partition etc complete. The rear side of the unit shall be made with 6mm thk commercial ply , which shall have synthetic enamel paint over primer coat on rear face. Inner surface of the wardrobes shall be finished with 0.8mm thk approved laminate. The horizontal partition shall be of removable type fixed with necessary SS fittings and hardware. The exterior face of the cupboard shall be finished with 1 mm approved laminates. Each shutters shall have full height SS piano type hinges. The handles shall be 125mm of powder coated brass. The unit shall have necessary fittings such as tower bolts, 4 lever CB locks, SS hanger rod, magnetic catchers etc complete. All wood-work, commercial boards/ply to have coat of anti termite of approved make before lamination. Rate is inclusive of all materials, teak wood lippings, T&P, taxes etc. complete. Wardrobes shall be provided with 125 micron polythene sheets on surface touching to wall surfaces.(Front face shall be measured for payment) Sqm 198.00 0.00

16 NS-16 Installation & Commissioning of FRP tank of Package Sewage Treatment Plant & Treated Water Storage tank Scope of work includes installation,testing and commissioning of 20 KLD FRP tank and 10 KL treated Water Storage Tank (supplied under Item No: 20 & 21) as per the drawing and size of the tank. The Tank should be laid at an adequate depth below the sewage pipe at the site. The tank shall be installed exactly as per the approved installation drawing issued by the FRP Tank manufacturer. (Excavation & Construction of 3-4 manhole chambers above the tank shall be paid extra through other items). Rate to include installation as per manufacturer drawing complete job. Scope also includes providing and fixing of required no. of FRP straps, Turn Buckles, MS Wire rope, Eye bolts, adequate no. of Concrete dead man as per installation requirement. Scope of work includes providing and fixing 2" PVC Air vent nozzle as per requirement and manufacturer supplied Manhole covers. Scope also includes the pump electrical connections and piping uptil an advised point outside the tank. Each 1.00 0.00

17 NS-17 Providing and Fixing wooden flooring of 8mm thick AC 4 Pergo- Living Expression premium range or equivalent with laminated texture finish of approved shade including pergo make sub base of 2mm thick made up of ufoam. Installation complete in all respect including door profile, skirting sqm 60.00 0.00

18 NS-18 Supplying and filling in foundation, plinth and floors with good quality moorum in layers of 20 cm each including watering, cmpaction and its transportation by mechanical/manual means with all leads and lifts ttc complete. (Compacted volume of murum shall be measured and paid) Cu.m. 391.00 0.00

19 NS-19 Providing and fixing polythene sheet of 125 micron below RCC as directed by Engineer-in-charge. Sqm. 550.00 0.00

20 NS-20 FRP base Packaged Sewage Treatment Plant of Capacity 20 KLD- Supply of Package Sewage Treatment Plant System of Capacity 20 KLD including all electrical work. (Electrical cable upto 10 mtr. And extra piping etc upto 10.0 mtr. length as per site condition is also included in the rates). Complete package of 20 KLD STP shall be in three zones housed in one FRP tanks (a) Septic tank / Solid Seperation Zone (b) Fixed film aeration zone and (c) Sedimentation zone, all zones separated through FRP wall. The tank should be of size: length ranging from 6.0m - 7.0 m & Diameter ranging from 2.3m to 2.6 m. The FRP tank should be manufactured from Isothelic unsaturated polyester resin and glass fibre and should be of min wall thickness of 6.3mm. The tank should not buckle or rupture/deform with a minimum Load 2.25 meters of wet soil cover. Scope of item includes supply of 1 no. Sludge Removal Submersible pump of Kirloskar / GLS / AMU/ Equivalent approved make of capacity - 9.0 cum/hr & 1 HP. Rate further to include providing of 2 nos twin lobe blowers of 2 HP capacity motor (USHA/ EVEREST/Airvak Equivalent make) for working pressure of 0.3 kg/cm2, job includes providing 3" blower pipe to connect the blower to the aeration zone. Job also includes supply of 2 no 1 HP submersible pump (Kirloskar / GLS/AMU/Equivalent ) for pumping treated water. Supply of weather proof control panel of adequate size and gauge as per manufacturer/ EIC approved specification to operate pumps and blowers. The entire STP system to be guaranteed for a period of 12 month from the date of commissioning. Each 1.00 0.00

21 NS-21 Treated Water Storage Tank- 10 KL Supplying of FRP base treated water storage tank shall be provided for the storage of final treated water. The tank should be of size: length ranging from 4.0m - 5.0 m & Diameter ranging from 1.8 m to 2.0 m. The FRP tank should be manufactured from Isothelic unsaturated polyester resin and glass fibre and should be of min wall thickness of 6.3mm. The tank should not buckle or rupture/deform with a minimum Load 2.25 meters of wet soil cover. Each 1.00 0.00

Total (PART-B) - Non Scheduled Items (Excluding GST) 0.00

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

(SCHEDULE OF RATES AND PRICES : PART-III (SEWERAGE SYSTEM), PART-A- SCHEDULED ITEMS AS PER DSR-2014)

Bidder’s Name and Address To:

Bidder as Contract & Material

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

All values are in Indian Rupees.

SI. No. ITEM NO. Item Description Unit Qty. Rate Amount

PART-III Construction of SEWERAGE SYSTEM for Residential Qtr

PART-A - (SCHEDULE ITEMS AS PER DSR - 2016)

1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil Cu.m. 60.00

2 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia. Metre 1000.00

3 2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). Metre 50.00

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cu. M 20.00

5 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cu. M 50.00

6 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for :

4.3.1 Foundations, footings, bases for columns Sq.m. 80.00

7 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 metre 10.00

8 18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :

18.27.3 150 mm dia pipe metre 50.00

9 18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :

18.28.3 150 mm diameter pipe each 20.00

10 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

19.1.2 150mm diameter Metre 1000.00

11 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :

19.2.2 150 mm diameter S.W. pipe Metre 1000.00

12 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

19.6.4 300 mm dia RCC pipes. metre 30.00

13 19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :

19.15.1 With 20x20 mm square bar Each 30.00

Sum of Items as per DSR-2016

Percentage quoted above (+) / below(-) DSR-2016 0.00

Total for PART-III (PART-A) -(Schedule Items) 0.00

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Schedule - 2

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

(SCHEDULE OF RATES AND PRICES : PART-III (SEWERAGE SYSTEM), PART-B- NON SCHEDULED ITEMS)

Bidder’s Name and Address To:

Bidder as Contract & Material

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

All values are in Indian Rupees.

SI. No. Item no. Item Description Unit Qty. Rate Amount

PART-II Construction of SEWERAGE SYSTEM for Residential Qtr

PART-B NON-SCHEDULE ITEMS

1 NS-1 Construction brick masonary manholes in cement mortar 1:4 - 1 cement : 4 coarse sand- R.C.C. top slab with 1:2:4 mix -1 cement : 2 coarse sand : 4 approved graded stone aggregate 20mm nominal size- foundation concrete 1:4:8 mix -1 cement : 4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastring 12mm thick with cement morter 1:3(1 cement:3 Coarse sand) finished with a floating coat of neat cement and making channel in cementconcrete 1:2:4 (1 cement:2 coarse sand:graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design of CPWD.

Inside size 90X80 cm and 45cm deep including C.I. Cover with frame (light duly) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 Kg (weight of cover 23 Kg and and weight of frame 15 Kg)

a With Fly Ash Bricks Each 40.00

2 NS-2 Extra for depth for manholes

With Fly Ash Bricks of average compressive strength of 50 Kg/cm2 Meter 35.00

Total PART-III ( PART-B) - (Non-Schedule Items)

Date : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Schedule - 3

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”." As per Lum-sum

(SCHEDULE OF RATES AND PRICES : PART-C- ELECTRICAL ITEMS) AS per Percent

As per lum-sum on Sch-3

Bidder’s Name and Address To: As per Percent on Sch-3

Bidder as Contract & Material Multipackage lum-sum

Name : Power Grid Corporation of India Ltd., Multipackage on Percent

Address : Western Region -I Headquarters Total Discount

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

All values are in Indian Rupees.

Item. No Activity Number Group Description of Item Unit Qty. Rate Amount

PART-C Electrical Items

Internal Electrification Works of D-Type -01, C- Type -04 nos, B3 Type - 04 nos and B2-12 nos quarter at Padghe substation Township

A MAIN CIRCUIT WIRING: From MDB Panel / Meter Panel To SDBs (Ground Floor)

Supply, laying, installation towards main circuit wiring from Meter Panel / MDB to respective SDBs as per the drawing, interior layout, site conditions in concealed / recessed medium gauge PVC conduit (ISI approved) including supply of conduits and its accessories, FR type wires (ISI approved) and other required materials as per technical specification and as per direction of Engg-in-charge (Conduits to be laid in columns, beams, slabs before concreting in walls and before or after the walls are raised as required by structural restraint) complete for the following :-

1 4X6 sq.mm + 2 X 4 sq. mm(green) PVC insulated Copper Conductor Multistrand wire, Mains wiring For Meter panel as per the direction of engg-in-charge Mtrs 126 0.00

2 2X6 sq.mm + 1 X 4 sq. mm(green) PVC insulated Copper Conductor Multistrand wire, Mains wiring from Meter panel to RCCB of SDB as per single line drawing, site condition and Direction of engg-in-charge Mtrs 798 0.00

B SUB CIRCUIT WIRING - from SDBs to Switchboards ; 6A power sockets ; 16A & 25A Power sockets & Weather proof power sockets :- 0.00

Supply, laying, installation towards sub circuit wiring from SDBs(Ground floor ) to Switchboards; 6A; 16A & 25A Power sockets as per the drawing, interior layout, site condition in separate individual concealed / recessed medium gauge PVC conduit (ISI approved) including supply of conduits and its accessories, FR type wires (ISI approved) and other required materials as per technical specification and as per direction of Engg-in-charge (Conduits to be laid in columns, beams, slabs before concreting in walls and before or after the walls are raised as required by structural restraint) complete for the following :- 0.00

1 SDB to Switch Board to AC Switch Sockets Point and Power Points :- Mtrs 4000 0.00

Main with 2x4 Sq.mm and earth wire 2.5 sq.mm FR PVC Copper conductor Multistrand wires in PVC Conduit as per the technical specification. 0.00

2 SDB to Switchboards and Switchboard to Switchboard :- Mtrs 5534 0.00

Main with 2x 2.5 Sq.mm and earth wire 1.5 sq.mm FR PVC Copper conductor Multistrand wires in PVC Conduit as per the technical specification. 0.00

C POINT WIRING :- (From switchboard to individual light points / street light point / ceiling fan point / Ex-fan points):- 0.00

Supply, laying and installation towards point wiring with 1.5sq.mm (for phase, neutral & earth ) 1100V PVC insulated copper conductor multistrand FR type wires (ISI approved) in recessed medium gauge PVC conduit (ISI approved) as per the drawing, interior layout, site condition including supply of conduit, associated conduit accessories, wires and other materials required as per technical specification and as per direction of engg-in-charge (Conduits to be laid in columns, beams, slabs before concreting in walls and before or after the walls are raised as required by structural restraint) complete for the following :- 0.00

1 From Switchboard to Light point / Ceiling fan / Exhaust fan / Bell Point / 6 A Switch Sockets :- Mtrs 9043 0.00

Main with 2x1.5 Sq.mm and earth wire 1.5 sq.mm FR PVC Copper conductor Multistrand wires in PVC Conduit as per the technical specification. 0.00

D MODULAR SWITCHES, BOXES, COVER PLATES FOR LIGHT, CEILING FAN, BELL POINTS, BELL STATION, 6A SWITCH SOCKET & 15A POWER SOCKETS. 0.00

Supply, installation, testing and commissioning of wiring accessories of approved ISI/CE certified make modular range such as modular switches, switch socket outlets, power sockets, etc. for the following with suitable mounting plates & boxes (modular range) in the required configuration as per the interior layout and direction of engg-in-charge 0.00

1 10A single pole, 1way switch for light and for 6A power points of ISI mark approved make. Nos. 873 0.00

2 10A single pole, 2 way switch for ceiling fan and light of ISI mark approved make. Nos 51 0.00

3 6A, Multipin 5/6 Socket of ISI mark approved make. Nos. 213 0.00

4 16 & 6A ,6 pin heavy duty Socket with independent switch along with indicator of ISI mark approved make. Nos. 122 0.00

5 20 A , Single pole, 1 way switch of ISI mark approved make for with Indicator for Geysers and Heater. Nos 25 0.00

6 16 A , Multipin 5/6 pin Socket of ISI mark approved make for with Indicator for Geysers and Heater. Nos 25 0.00

7 32A Switch and 20 A Socket for AC unit of ISI mark approved make. Nos. 79 0.00

8 Electronic regulator (Step type) for ceiling fan / Wall mounting fan of ISI mark approved make. Nos. 132 0.00

9 T.V socket single outlet of ISI mark approved make. Nos 98 0.00

10 10A one way bell push with indicator of ISI mark approved make. Nos 21 0.00

11 Musical door bell of ISI mark approved make. Nos 21 0.00

12 Concealed type modular switch box with double mounting plate for 1/2 module of ISI mark approved make. Nos. 313 0.00

13 Concealed type modular switch box with double mounting plate for 3 module of ISI mark approved make. Nos. 225 0.00

14 Concealed type modular switch box with double mounting plate for 4 module of ISI mark approved make. Nos. 99 0.00

15 Concealed type modular switch box with double mounting plate for 6 module of ISI mark approved make. Nos. 135 0.00

16 Concealed type modular switch box with double mounting plate for 8 module of ISI mark approved make. Nos. 45 0.00

17 Concealed type modular switch box with double mounting plate for 12 module of ISI mark approved make. Nos. 89 0.00

E WIRING,SOCKET AND J. BOX FOR TELEPHONE POINT :- 0.00

Supply, laying & installation towards telephone point wiring including supply of medium gauge PVC conduit (ISI approved), PVC insulated 2 pair of 0.55 mm dia. electrolytic tinned copper wire in a separate PVC conduit from the telephone tag block(EPABX) to individual( telephone outlet point as per the drawing, site condition including its associated accessories and others of the following :- 0.00

1 Supply and Erection of 20 MM Conduits with required associated accessories. Mtrs 966 0.00

2 Supply and Erection of Telephone cable 2 pair with 0.5 mm dia of ISI mark approved make. Mtrs 1073 0.00

3 Telephone socket one gang with safety shutter of ISI mark approved make. Nos. 99 0.00

4 Supply, Erection and Commissing of Junction Box suitable for 20 Pair tag blocks in 2 nos of 10 pair krone, disconnector type, complete with metal enclosure powder coated, krone tag block mounting arrangement of ITI approved make or eqvt. make. Set 7 0.00

F CONDUIT, WIRING,SOCKET & BOX FOR TV AMPLIFIER OF TV POINTS :- 0.00

Supply, laying and installation of RG coaxial cable including supply of medium gauge (MMS) PVC conduit from Junction box to individual T.V. socket as per the interior layout and direction of engg-in-charge for the following:- 0.00

1 Supply, Laying and Erecting of 20 MM Conduits with required associated accessories. Mtrs 966 0.00

2 Supply and Installation of RG - 6 /11 coaxial cable (Finolex make, Or eqvt. make ) Mtrs 1073 0.00

G Main Incoming Panel 0.00

1 Supply, erection, testing and commissioning of Main Incoming Panel made of CRCA sheet of 14 gauge of size 1.2 m(H) x 1m(W) x 0.4m (D) with double door provision having hinged front door of suitable size including cutting, bending, welding,drilling, rivetting,etc and painted with one coat of red lead paint and two coats of white glossy enamel paint inside and light green enamel paint of approved colour on outside with suitable mounting arrangement mounted on angle iron frame of size 35x35x5 mm to be mounted in staircase area at ground floor at suitable location as per site condition and direction of engg-in-charge. The front door shall have self locking arrangement with weather & water proof neoprene good quality gasket and the MDB should have the provision of suitable dia holes for incoming and outgoing cables complete as required as per technical specification :- Set 5 0.00

a) 1 No. Triple metal / Iron clad switch & fuse with neutral link 415 V, 200 Amp with standard electrical accessories like rotary handle, vary depth with required padlock support for operating handle,required spreader links etc. as required and ON/OFF/TRIP indicators . 0.00

b) Required 4 Nos Al Busbar having 200 A rating . busbar mounted in support insulator as per technical specification, single line diagram inside the Main incomer panel with suitable mounting arrangement. 0.00

c) 3 nos. of LED type R, Y & B phase Indication lamp in incomer side of L&T make or eqvnt. Make. 0.00

d) Provision for 4 Nos Single Phase Energy Meter 0.00

e) 4 Nos, 4 Pole, 63 Amp, MCB, place after busbar. 0.00

f) 4 nos. 3 Ph Change over switch for switching of phases in case of any phase failure of 415/500V, 63 A rating Rotary switch 0.00

g) Complete with necessary inter connection between TPN SFU, incoming cable, Required size busbar, Phase change over switch, all mounted inside the Main incoming panel in phase segregated manner ,duly wired and tested as per the Single line diagram with required size of PVC copper wires, required terminal connectors etc., as per the site condition and direction of engg-in-charge complete in all respect. 0.00

2 Supply, erection, testing & commissioning of AC Static Watt-hour meter of 10-40A range suitable for measurement of energy (KWH) in 1 - phase, 2 wire. load conforming to IS:13779 of latest edition; CBIP publication and as per technical specification complete erected / mounted inside the above provided Meter box panel with suitable mounting accessories including wiring with required size wire and duly tested for class I accuracy as per direction of engg-in-charge. Nos 20 0.00

(Note :- The meter should be of Enercon / Actaris-Schlumberger / L&T / Havells / Emco / L&G / HPL / Elymer make, Respective Type test certificate / Calibration certificate to be submitted which is prerequisite.) 0.00

3 Supply, erection, testing & commissioning of AC Static Watt-hour meter of 10-40A range suitable for measurement of energy (KWH) in 3 - phase, 4 wire. load conforming to IS:13779 of latest edition; CBIP publication and as per technical specification complete erected / mounted inside the above provided Meter box panel with suitable mounting accessories including wiring wire and duly tested for class I accuracy as per direction of engg-in-charge. Nos 1 0.00

(Note :- The meter should be of Enercon / Actaris-Schlumberger / L&T / Havells / Emco / L&G / HPL / Elymer make, Respective Type test certificate / Calibration certificate to be submitted which is prerequisite.) 0.00

H Sub Distribution Board-SDB (Single phase distribution board with RCCB as Incomer & Single pole MCB as Outgoing ) :- 0.00

Supply, erecting, testing & commissioning of Single pole and neutral totally enclosed Distribution Board (Double door glazed type) RCCB / MCB for Power & lighting Sub distribution conforming to IS:8623 and IEC standard of IP42 flush mounted at location indicated in the drawing complete as required and made from 18 gauge sheet steel / C.R.C.A. with stove enamell paint/powder coated suitable for installation in recess of approved make complete with required busbar per phase , brass neutral link of required current carrying capacity, required capacity brass earth bar erected on angle iron frame complete. No fabricated DBs shall be allowed. Only DBs of specified make as per technical specification and as per direction of engg-in-charge shall be used. (horizontal / vertical busbar type) including lugging wiring connection etc. for the following :- 0.00

1 DP SDB (SUB DISTRIBUTION BOARD) with 2 Pole, 40 Amp Isolator as incomer-1 no.and outgoings suitable for accommodating the following of 6A,10A & 20A, 1 pole MCBs, 10 KA short circuit rating capacity which is to be installed as per the direction of engg-in-charge. In the outgoing circuit in the phase segregated design with all accessories like bus bars, lugs, leads,FLUSH MOUNTED with double door complete, suitable size cable entry space for incoming / outgoing cables, CONCEALED IN WALLS/ erected on suitable angle iron frame (if applicable) of L&T (HAGER) Cat.no VYS16G (or) other eqvnt. make as required as per technical specification (Note :- 2 pole, 40 Amp Isolator Incomer is included in the SP SDB above item & outgoing 1 pole, MCB is extra payable as per item no. H.5) Set 16 0.00

2 DP SDB (SUB DISTRIBUTION BOARD) with 2 Pole, 63 Amp Isolator as incomer-1 no., associated kits; and outgoings suitable for accommodating the following of 6A,10A & 20A, 1 pole MCBs, 10 KA short circuit rating capacity which is to be installed as per the direction of engg-in-charge. In the outgoing circuit in the phase segregated design with all accessories like bus bars, lugs, leads,FLUSH MOUNTED with double door complete, suitable size cable entry space for incoming / outgoing cables, CONCEALED IN WALLS/ erected on suitable angle iron frame of L&T (HAGER) Cat.no VYS16G (or) other eqvnt. make as required as per technical specification (Note :- 2 pole, 63 Amp Isolator Incomer is included in the SP SDB above item & outgoing 1 pole, MCB is extra payable as per item no. H.5) Set 4 0.00

3 TP SDB (SUB DISTRIBUTION BOARD) Supply ,Installation ,testing & commissioning Test lab with 4 Pole, 63 Amp Isolator as incomer- 1 no. and outgoings suitable for accommodating the following of 6A,10A & 20A, 1 pole MCBs, 10 KA short circuit rating capacity, which is to be installed as per the direction of engg-in-charge. In the phase segregated design with all accessories like fork bus bars, lugs, leads, FLUSH MOUNTED with double glazed door complete, suitable size cable entry jumpers space for incoming / outgoing cables CONCEALED IN WALLS/ erected on suitable angle iron frame (if applicable) of Hager Cat. No. VYH06GH (or) other eqvt. make as required as per technical specification (Note :- 4 pole 63 Amp, Isolator is included in the above item & outgoing 1 pole, MCB is as per item no. H.5) Set 1 0.00

4 Supply and Erection of Metal Box of 16 Gauge CRCA sheet with Self locking arrangement with duplicate key including painting, cutting and fabricating for accommodating TP SDB and 3 Phase Energy Meter including all other required accessories as per the direction of Engineer In-charges Nos 1 0.00

5 Supply, installation, testing & commissioning of 1 Pole MCBs Type-C of following rating,10KA Short circuit rating installed in the outgoing above SDBs as per single line / power schematic diagram. Nos 290 0.00

1P 6A to 32A, cat no.NC 106N/110N/116N/120N/132N make L&T (or) equivalent make 0.00

I SUPPLY OF ENERGY SAVER LIGHT FITTINGS/FIXTURES, WEATHER PROOF STREET LIGHT FLOURESCENT FITTINGS; CEILING FAN; WALL MOUNTING FAN; EX-FAN AND ERECTION/ INSTALLATION WORKS :- 0.00

Providing, installation, testing and commissioning of pre wired FLOURESCENT Fitting / CFL complete with Tube etc., in all respect on ceiling with necessary down rods as required or wall or recessed mounting as per the site condition and direction of engg-in-charge. 0.00

1 Supplying & Erecting of 1 x 22 W T-8 Energy Efficient LED Tube light fitting including LED tube with heat sink, integrated HF electronic driver . Similar to Syska model SSK-T5-22W or equivalent Nos 158 0.00

2 Supply, erection, testing and commissioning of ceiling mounted 9 to12 Watt Circular LED down lighter fitting , Including LED lamp and all other required accessories including LED. to complete the work. The make should of Philips, Bajaj , CG ,Syska, Wipro or reputed make . as per direction of engg-in-charge Nos 206 0.00

3 Supply, erection, testing and commissioning of 3000 Lumen (min) LED Street light fitting, Including LED lamp and all other required accessories to complete the work.The make should of Philips, Bajaj , CG ,Syska, Wipro or reputed make . as per direction of engg-in-charge Nos 51 0.00

4 Supply and Installation of Street light Wall bracket only in outdoor area suitable for item no. I.3 fitting and for erection of side entry Weather & Water proof fitting made from 40mm dia 'B' class G.I. Pipe 1.2 mtrs. In length duly grouted in wall / RCC column as per site condition with 50x3mm M.S. flat and 10x100mm. Nuts & bolts with suitable size of 2 Nos. 'U' clamps with set screws along with necessary nipple,reducer etc. if required complete erected with PVC wire leads and duly painted with one coat of red oxide and two coats of aluminium paint and duly wired in approved manner. Nos 51 0.00

5 Supply and Installation on Single light fancy wall bracket in cluding 7 to 8 watt LED lamp with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size polished wooden / laminated board.The make of LED should of Philips, Bajaj , CG ,Syska, Wipro or reputed make . as per direction of engg-in-charge Nos 191 0.00

6 Supply and installation of 1 X18 W CFL mirror mounted fitting with slim channel with opal acrylic diffuser, end caps & coloured rims including mounting accessories and 18 W CFL lamp of Bajaj Cat. No. BSP 118 CFL (or) equivalent model of Philips , Bajaj , CG, syska or reputed make for Wash Area as per interior layout, site condition and direction of engg-in-charge. Nos 48 0.00

7 Supply, erection, testing and commissing of BEE Five Star,1200mm sweep, double ball bearing ceiling fan with condenser A.C. 230V, 50 cycles with canopy, down rod up to required length with rubber bushing, bolts & nuts, including fan hook box of required size complete erected and marking the Sr.no. and date of erection. The recommended colour of ivory,white,brown of Bajaj (Regal) , Crompton Aura (or) Usha (or) Orient (or) GEC Alstom make or reputed make . as per direction of engg-in-charge Nos 114 0.00

8 Supplying, erecting, testing and commissioning of fresh air cum Exhaust fan of domestic heavy duty 250 Vac 50 Hz, 300 mm, 1400 RPM suitable for continuous duty in crowded kitchen rooms, toilets, lavoratories with double ball bearing with metallic body of approved make Crompton (or) Almonard (or) GEC (or) equivalent make.The required accessoies for fixing of exhaust fan on wall / Frame shall be in scope of contractor and providing necessary metal sheet CAWL to avoid bird entry (if Applicable) Nos 21 0.00

9 Supplying, erecting, testing and commissioning of fresh air cum Exhaust fan of domestic heavy duty 250 Vac 50 Hz, 200-250 mm, 1300 RPM suitable for continuous duty in Toilets with good aesthetic look of approved make Bajaj (Maxima DX) , Crompton Crossair or equivalent make. The required accessoies for fixing of exhaust fan on wall / Frame shall be in scope of contractor and providing necessary metal sheet CAWL to avoid bird entry (if Applicable) Nos 48 0.00

10 Supply ,Erection and Commissioning of Ceiling rose with hanging hook for Chandelier. Nos 22 0.00

J LIGHTNING PROTECTION 0.00

1 Providing & fixing Copper lightning conductor ( at the roof top ) made of 40 mm dia Copper pipe of standard length with 5 Nos Spikes at the top including holes etc.for fixing as required. Set 12 0.00

2 Providing and fixing 25mm x 3mm Aluminium Earthing Conductor from Base of Lightning Conductor to independent Earthing Pits including interconnection of both pits as required( for Vertical as well as horizontal run). Jointing of Al Strips to be done by riveting and welding having overlaps of 150mm. Kg 68 0.00

K EARTHING STATION, EARTHING CONDUCTOR, G.I. Plate & GI Pipe :- 0.00

Supply,laying, installation,connecting,testing & commissioning of following earthing station, earthing conductor for difference purposes as specified in the technical specification & as per IS:3043 :- 0.00

1 2 nos. of 25 x 6mm G.I. Strip from MDB to the earthing station all along the concrete pathway / road / all along the cable trench as per site condition and as per direction of engg-in-charge. Kg 104 0.00

2 Providing Copper Plate (60x60x0.315cm) earthing station as specified in IS:3043 and 25 kg of maintenance free earth conductivity enhancing mineral earthing compound with excavation, treatment of soil, providing test link, 50*6mm G.I strip from earthing link and connected to the meter panel; making of chamber along with watering funnel with C.I cover hinged to C.I. Frame. Set 20 0.00

3 Supply and erection of ISI mark G.I. pipe" Medium" 50 mm dia. Erected for incoming power supply cable, telephone cable and others required on the wall / pathway with necessary clamps and upper end closed with TW bush & sealed with compound. Mtrs. 98 0.00

Total - Internal Electrification Works of D-Type -01, C- Type -04 nos, B3 Type - 04 nos and B2-12 nos quarter at Padghe substation Township 0.00

INTERNAL ELECTRIFICATION WORKS OF COMMUNITY CENTRE ON 2ND OF TRANSIT CAMP AT PADGHE SUBSTATION 0.00

A CIRCUIT WIRING - From MDB Panel / Meter Panel To SDBs and From SDBs to Switchboards ; Light / Fan Points ; 6A Power sockets ; 16A & 25A Power sockets:- 0.00

Supply, laying, installation towards main circuit wiring from Meter Panel / MDB to respective SDBs , SDBs to Switch boards and Light / Fan points , as per the drawing, interior layout, site conditions in concealed / recessed medium gauge PVC conduit (ISI approved) including supply of conduits and its accessories, FR type wires (ISI approved) and other required materials as per technical specification and as per direction of Engg-in-charge (Conduits to be laid in columns, beams, slabs before concreting in walls and before or after the walls are raised as required by structural restraint) complete for the following :- 0.00

1 MDB Panel / Meter Panel To SDB 0.00

2X6 sq.mm + 1 X 4 sq. mm(green) PVC insulated Copper Conductor Multistrand wire, Mains wiring from Meter panel to RCCB of SDB as per site condition and Direction of engg-in-charge Mtrs 24 0.00

2 SDB to Switch Board to AC Switch Sockets Point and Power Points :- 0.00

Main with 2x4 Sq.mm and earth wire 2.5 sq.mm FR PVC Copper conductor Multistrand wires in PVC Conduit as per the technical specification. Mtrs 108 0.00

3 SDB to Switchboards and Switchboard to Switchboard :- 0.00

Main with 2x 2.5 Sq.mm and earth wire 1.5 sq.mm FR PVC Copper conductor Multistrand wires in PVC Conduit as per the technical specification. Mtrs 132 0.00

4 From Switchboard to Light point / Ceiling fan / Exhaust fan / 6 A Switch Sockets :- 0.00

Main with 2x1.5 Sq.mm and earth wire 1.5 sq.mm FR PVC Copper conductor Multistrand wires in PVC Conduit as per the technical specification. Mtrs 336 0.00

B MODULAR SWITCHES, BOXES, COVER PLATES FOR LIGHT, CEILING FAN, BELL POINTS, BELL STATION, 6A SWITCH SOCKET & 15A POWER SOCKETS. 0.00

Supply, installation, testing and commissioning of wiring accessories of approved ISI/CE certified make modular range such as modular switches, switch socket outlets, power sockets, etc. for the following with suitable mounting plates & boxes (Modular Range) in the required configuration as per the interior layout and direction of engg-in-charge 0.00

1 10A single pole, 1way switch for light and for 6A power points of ISI mark approved make. Nos. 70 0.00

2 10A single pole, 1way switch with fan mark for Ceilling fan & Ex fan of ISI mark approved make. Nos 14 0.00

3 16 & 6A ,6 pin heavy duty Socket with independent switch along with indicator of ISI mark approved make. Nos. 8 0.00

4 10A, Multipin 5/6 Socket of ISI mark approved make. Nos. 7 0.00

5 20 A , Single pole, 1 way switch of ISI mark approved make for with Indicator Nos 14 0.00

6 16 A , Multipin 5/6 pin Socket of ISI mark approved make for with Indicator Nos 14 0.00

7 Electronic regulator (Step type) for ceiling fan / Wall mounting fan of ISI mark approved make. Nos. 14 0.00

8 Concealed type modular switch box with double mounting plate for 1/2 module of ISI mark approved make. Nos. 12 0.00

9 Concealed type modular switch box with double mounting plate for 3 module of ISI mark approved make. Nos. 8 0.00

10 Concealed type modular switch box with double mounting plate for 4 module of ISI mark approved make. Nos. 8 0.00

11 Concealed type modular switch box with double mounting plate for 6 module of ISI mark approved make. Nos. 4 0.00

12 Concealed type modular switch box with double mounting plate for 8 module of ISI mark approved make. Nos. 3 0.00

13 Concealed type modular switch box with double mounting plate for 12 module of ISI mark approved make. Nos. 3 0.00

C WIRING,SOCKET AND J. BOX FOR TELEPHONE POINT :- 0.00

Supply, laying & installation towards telephone point wiring including supply of medium gauge PVC conduit (ISI approved), PVC insulated 2 pair of 0.55 mm dia. electrolytic tinned copper wire in a separate PVC conduit from the telephone tag block(EPABX) to individual( telephone outlet point as per the drawing, site condition including its associated accessories and others of the following :- 0.00

1 Supply and Erection of 20 MM Conduits with required associated accessories. Mtrs 40 0.00

2 Supply and Erection of Telephone cable 2 pair with 0.5 mm dia of ISI mark approved make. Mtrs 50 0.00

3 Telephone socket one gang with safety shutter of ISI mark approved make. Nos. 3 0.00

D DP AND TP DISTRIBUTION BOARD, ENERGY METER AND MCB 0.00

1 DP SDB (SUB DISTRIBUTION BOARD) with 2 Pole, 63 Amp Isolator as incomer-1 no., associated kits; and outgoings suitable for accommodating the following of 6A,10A & 20A, 1 pole MCBs, 10 KA short circuit rating capacity which is to be installed as per the direction of engg-in-charge. In the outgoing circuit in the phase segregated design with all accessories like bus bars, lugs, leads,FLUSH MOUNTED with double door complete, suitable size cable entry space for incoming / outgoing cables, CONCEALED IN WALLS/ erected on suitable angle iron frame of HAGER Cat.no VYS16G (or) other eqvnt. make as required as per technical specification (Note :- 2 pole, 63 Amp Isolator Incomer is included in the SP SDB above item & outgoing 1 pole, MCB is extra payable as per item no. D.3) Set 1 0.00

2 TP SDB (SUB DISTRIBUTION BOARD) Supply ,Installation ,testing & commissioning Test lab with 4 Pole, 63 Am Supply ,Installation ,testing & commissioning Test lab with 4 Pole, 63 Amp Isolator as incomer- 1 no. and outgoings suitable for accommodating the following of 6A,10A & 20A, 1 pole MCBs, 10 KA short circuit rating capacity, which is to be installed as per the direction of engg-in-charge. In the phase segregated design with all accessories like fork bus bars, lugs, leads, FLUSH MOUNTED with double glazed door complete, suitable size cable entry jumpers space for incoming / outgoing cables CONCEALED IN WALLS/ erected on suitable angle iron frame (if applicable) of Hager Cat. No. VYH06GH (or) other eqvt. make as required as per technical specification (Note :- 4 pole 63 Amp, Isolator is included in the above item & outgoing 1 pole, MCB is as per item no. D.3) Set 1 0.00

3 Supply, installation, testing & commissioning of 1 Pole MCBs Type-C of following rating,10KA Short circuit rating installed in the outgoing above SDBs as per single line / power schematic diagram. Nos 25 0.00

1P 6A to 32A, cat no.NC 106N/110N/116N/120N/132N make L&T (or) equivalent make. 0.00

E SUPPLY OF ENERGY SAVER LIGHT FITTINGS/FIXTURES, WEATHER PROOF STREET LIGHT FLOURESCENT FITTINGS; CEILING FAN; WALL MOUNTING FAN; EX-FAN AND ERECTION/ INSTALLATION WORKS :- 0.00

Providing, installation, testing and commissioning of pre wired FLOURESCENT/LED Fitting / CFL complete with Tube etc., in all respect on ceiling with necessary down rods as required or wall or recessed mounting as per the site condition and direction of engg-in-charge. 0.00

1 Supplying & Erecting of 1 x 22 W T-8 Energy Efficient LED Tube light fitting including LED tube with heat sink, integrated HF electronic driver . Similar to Syska model SSK-T5-22W or equivalent Nos 5 0.00

2 Supplying and erecting Energy efficient T5 light fitting suitable for 2 x 19W (Min) Energy Efficient LED Tube light fitting including LED tube with heat sink, integrated HF electronic driver. Similar to Philips Cat - TCW450 P 2XTLED 19W P3397 and other Equivalent model of CGL, Wipro, Bajaj etc. Make. Nos 10 0.00

3 Supply and Installation on Single light fancy wall bracket in cluding 7 to 8 watt LED lamp with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size polished wooden / laminated board.The make of LED should of Philips, Bajaj , CG ,Syska, Wipro or reputed make . as per direction of engg-in-charge Nos 6 0.00

4 Supply, erection, testing and commissioning of ceiling mounted 9 to12 Watt Circular LED down lighter fitting , Including LED lamp and all other required accessories including LED. to complete the work. The make should of Philips, Bajaj , CG ,Syska, Wipro or reputed make . as per direction of engg-in-charge Nos 6 0.00

5 Supply and installation of 1 X18 W CFL mirror mounted fitting with slim channel with opal acrylic diffuser, end caps & coloured rims including mounting accessories and 18 W CFL lamp of Bajaj Cat. No. BSP 118 CFL (or) equivalent model of Philips , Bajaj , CG, syska or reputed make for Wash Area as per interior layout, site condition and direction of engg-in-charge. Nos 4 0.00

6 Supply and installation of 4000 (Min) Lumen output LED flood light fitting,class IP65 or above. Housing of pressure, die cast aluminium alloy and heat sink extruded aluminium with suitable bracket for erected on Celing / Wall/ Truss with required acessories to complete the work. Make should of Philips , Bajaj , CGL , Wipro or Equivalent make as per direction of Engg-in-charge. (Note :- Respective test certificate and warranty certificate to be submitted) Nos 2 0.00

7 Supplying and Installation of square shaped CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) 600X600mm suitable for 36 W-40W with suitable bracket for erected on Celing / Wall/ Truss with required acessories to complete the work. Make should of Philips , Bajaj , CGL , Wipro or Equivalent make as per direction of Engg-in-charge. (Note :- Respective test certificate and warranty certificate to be submitted) Nos 12 0.00

8 Supply, erection, testing and commissing of BEE Five Star,1200mm sweep, double ball bearing ceiling fan with condenser A.C. 230V, 50 cycles with canopy, down rod up to required length with rubber bushing, bolts & nuts, including fan hook box of required size complete erected and marking the Sr.no. and date of erection. The recommended colour of ivory,white,brown of Bajaj (Regal) , Crompton Aura (or) Usha (or) Orient (or) GEC Alstom make or reputed make . as per direction of engg-in-charge Nos 9 0.00

9 Supplying, erecting, testing and commissioning of fresh air cum Exhaust fan of domestic heavy duty 250 Vac 50 Hz, 200-250 mm, 1300 RPM suitable for continuous duty in Toilets with good aesthetic look of approved make Bajaj (Maxima DX) , Crompton Crossair or equivalent make. The required accessoies for fixing of exhaust fan on wall / Frame shall be in scope of contractor and providing necessary metal sheet CAWL to avoid bird entry (if Applicable) Nos 2 0.00

10 Supplying, erecting, testing and commissioning of fresh air cum Exhaust fan of domestic heavy duty 250 Vac 50 Hz, 300 mm,TRANS AIR, 1400 RPM suitable for continuous duty in crowded for Rooms with double ball bearing with metallic body of approved make Crompton (or) Almonard (or) GEC (or) equivalent make.The required accessoies for fixing of exhaust fan on wall / Frame shall be in scope of contractor and providing necessary metal sheet CAWL to avoid bird entry (if Applicable) Nos 7 0.00

F LIGHTNING PROTECTION 0.00

1 Providing & fixing Copper lightning conductor ( at the roof top ) made of 40 mm dia Copper pipe of standard length with 5 Nos Spikes at the top including holes etc.for fixing as required. Set 1 0.00

2 Providing and fixing 25mm x 3mm Aluminium Earthing Conductor from Base of Lightning Conductor to independent Earthing Pits including interconnection of both pits as required( for Vertical as well as horizontal run). Jointing of Al Strips to be done by riveting and welding having overlaps of 150mm. Kg 30 0.00

G EARTHING STATION, EARTHING CONDUCTOR, G.I. Plate & GI Pipe :- 0.00

Supply,laying, installation,connecting,testing & commissioning of following earthing station, earthing conductor for difference purposes as specified in the technical specification & as per IS:3043 :- 0.00

1 2 nos. of 25 x 6mm G.I. Strip from MDB to the earthing station all along the concrete pathway / road / all along the cable trench as per site condition and as per direction of engg-in-charge. Kg 20 0.00

2 Providing Copper Plate (60x60x0.315cm) earthing station as specified in IS:3043 and 25 kg of maintenance free earth conductivity enhancing mineral earthing compound with excavation, treatment of soil, providing test link, 50*6mm G.I strip from earthing link and connected to the meter panel; making of chamber along with watering funnel with C.I cover hinged to C.I. Frame. Set 1 0.00

3 Supply and erection of ISI mark G.I. pipe" Medium" 50 mm dia. Erected for incoming power supply cable, telephone cable and others required on the wall / pathway with necessary clamps and upper end closed with TW bush & sealed with compound. Mtrs. 10 0.00

Total (PART-C) - Excl GST 0.00 0.18 #REF! #REF!

Date : 0 Printed Name : 0

Place : 0 Designation : 0

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Schedule - 5

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

(GRAND SUMMARY)

Bidder’s Name and Address To:

Bidder as Contract & Material

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Sl. No. Description

1 PART-A- Scheduled items 0.00

2 PART-B- Non Scheduled Items 0.00

3 PART-C- Electrical Items 0.00

Total of PART-A + PART-B 0.00

Place : Printed Name :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Schedule - 5 After Discount

"Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

(GRAND SUMMARY - AFTER DISCOUNT)

Bidder’s Name and Address To:

Bidder as Contract & Material

Name : Power Grid Corporation of India Ltd.,

Address : Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Sl. No. Description Total Price (INR) Total Discount 0.00%

1 PART-A- Supply 0.00 0.00 0

2 PART-B- Scheduled items 0.00 0 0

PART-B- Non Scheduled Items 0.00

2 PART-C- Electrical Items 0.00 0.00 0

Total of PART-A + PART-B + PART-C 0.00 0

GRAND TOTAL after Discount 0.00

Place : Printed Name :

This letter of discount is optional. Bidder may / may not offer any discount.

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Letter of Discount

LETTER OF DISCOUNT

Contract & Material

Power Grid Corporation of India Ltd.,

Western Region -I Headquarters

Sampriti Nagar, Nari Ring Road

PO: Uppalwadi, Nagpur (MS) -440026

Subject : "Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”."

1) All the discounts mentioned below shall be applied separately.

2) Please verify Schedule-5 (after Discount) after filling this letter of discount.

With reference to the subject tender, we hereby offer unconditional discount on the prices quoted by us as per details given here below : Eq Weightage of Rs/ % Final Discount Factor

1 Discount on lum-sum basis on total price quoted by us. [The discount shall be proportionately applicable on all the items of all the Schdules of all the Parts i.e. (PART-A + Part-B+PART-C) In Rs. 0.00 0.000000%

2 Discount on percent basis on total price quoted by us. [The discount shall be proportionately applicable on all the items of all the Schdulesof all the Parts i.e. (PART-A + Part-B+PART-C) In Percent (%) 0.00%

1) Discount is Optional. 2) Bidder may fill any of the above two Indicated Discounts or both the Discounts. 3) Discount(s) offered at Sl. No. 1 to 2 will automatically simultaneously get accounted for in all the Schedules of all the Parts.. 0.00%

5 We hereby offer Multi-package discount as given below:

Multi-Package Discount(s) offered at sl. No. 5 will not get automatically accounted for in the respective items of the Schedules. The same shall be worked out saparately for evaluation.

Please consider this letter of discount as the integral part of our price bid.

Thanking you, we remain,

1) All the discounts mentioned above shall be applied separately.

2) Please verify Schedule-5 after filling the above letter of discount.

Yours faithfully,

For and on behalf of

Date : Printed Name :

Place : Designation :

Specification No.: WR-I/RPC/VRL/NIT-85/I-588-2025/RFX-5002004757 Bid Form 2nd Envelope 0 1 st 1 January

#REF! 2 nd 2 February

BID FORM (Second Envelope) 3 rd 3 March

Bid Proposal Ref. No. 5 th 5 May

Date : 6 th #VALUE! 6 June

7 th #VALUE! 7 July

To: 8 th #VALUE! 8 August

Contract & Material 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 th 10 October

Western Region -I Headquarters 11 th 11 November

Sampriti Nagar, Nari Ring Road 12 th 12 December

PO: Uppalwadi, Nagpur (MS) -440026 13 th

Name of Contract : "Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”." 15 th

Dear Ladies and/or Gentlemen, 16 th

1.0 In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to execute the work of "Balance work “for Construction of 21 nos. Residential Quarters, Community Centre above existing Transit Camp on 2nd floor, STP 20 KLD including Internal and External Water Supply, Sewerage works at POWERGRID Padghe sub-station.”." under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. 0 (Rupees only) or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to execute the work of under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. 0.00 (Rupees only) 17 th

Sch-1 PART-A-SCHEDULED ITEM 21 st

Sch-2 PART-B-NA

Sch-3 PART-C-NA

Sch-4 GRAND SUMMARY

Sch-5 After Discount GRAND SUMMARY after DISCOUNT

2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st

3.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : Printed Name :

Place : Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

0 zero thousand

0 zero crore Rupees

23 twenty three

27 twenty seven

28 twenty eight

33 thirty three

37 thirty seven

38 thirty eight

73 seventy three

74 seventy four

75 seventy five

77 seventy seven

78 seventy eight

79 seventy nine

83 eighty three

87 eighty seven

88 eighty eight

93 ninety three

97 ninety seven

98 ninety eight