Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC 32 H I G AWAS VIKAS COLONY SECTOR 3 BODLA AGRA UP 282007 | AGRA | AGRA | UP | 282007 | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹24.9 L+₹1.5 L (6.28%)Rejected-Finance | L2 | Rejected-Finance Other than L1 bidder | |
| 3 | L3₹25.8 L+₹2.3 L (9.85%)Rejected-Finance 23 GOURI KUNJ COLONY RONTA AGRA 282009 | AGRA | AGRA | UTTAR PRADESH | 282009 | L3 | Rejected-Finance Other than L1 bidder | |
| 4 | L4₹26.0 L+₹2.5 L (10.8%)Rejected-Finance GRAM RAKSHAWARA THANA KARARI TAH MANJHANPUR KAUSHAMBI | KAUSHAMBI | UTTAR PRADESH | 212201 | L4 | Rejected-Finance Other than L1 bidder | |
| 5 | L5₹28.0 L+₹4.5 L (19.1%)Rejected-Finance 00 BEHIND CHARCH NAYAGOWAN LAKHERA BEHIND RAMA MANI DAIRY KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | L5 | Rejected-Finance Other than L1 bidder |
| Sl No | Description | Qty | Unit | MNR ASSOCIATES L13 | M/s Kok Singh Sisodia L3 | M/S OMKAR SINGH YADAV L14 | 3Krishna Enterprises L5 | SahaDevSingh Constructions L19 | m/s shanti consruction co L1 | M/s Navansh Engineers & Consultants L15 | SHRI SAINATH ENGINEERS L7 | Asha Construction L8 | BS CONSTRUCTION L17 | M/s Salim Mohomad L9 | Singh Contractor and Supplier L16 | CREATIVE CONSTRUCTION L10 | M/S DEVENDRA KUMAR GUPTA L11 | M/s Krishna Construction Company L6 | M/S APOORVA CONSTRUCTION L12 | M/S SKY CONSTRUCTION L18 | M/S NARENDRA & COMPANY L4 | M/S RADHEY GOVIND ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down of All loose and de-bonded concrete/ screed, loose particles, dirt etc & Debris should be removed from Bldg. Roof substrate must be pressure-washed with water with, a minimum working pressure of 1400 psi is to be used to and/or remove all dirt, dust, chalking and waste products. Remove algae, mold by using bleach solution or biowash etc complete all as specified & directed. | 3,000 | Sqm | 24 ₹72,000 | 13 ₹39,000 | 60 ₹1,80,000 | 50 ₹1,50,000 | 40 ₹1,20,000 | 12 ₹36,000 | 20 ₹60,000 | 11 ₹33,000 | 40 ₹1,20,000 | 15 ₹45,000 | 1 ₹3,000 Lowest | 25 ₹75,000 | 10 ₹30,000 | 55 ₹1,65,000 | 30 ₹90,000 | 20 ₹60,000 | 55 ₹1,65,000 | 50 ₹1,50,000 | 35 ₹1,05,000 |
| 2.00 | M&L for repair of All visible hairline cracks on concrete roof / screed more than 0.50 mm and not giving hollow sound, should be cut and widen in V shape with mechanical cutter in the size (10mm W x 6mm D). Fill cracks with PU sealant / Hybrid Sealant with suitable gun and smoothed with a putty knife or trowel. Allow sealant to cure a minimum (72 Hrs.) 3 days etc complete all as specified & director. | 400 | RM | 150 ₹60,000 | 10 ₹4,000 Lowest | 90 ₹36,000 | 125 ₹50,000 | 120 ₹48,000 | 90 ₹36,000 | 210 ₹84,000 | 110 ₹44,000 | 70 ₹28,000 | 345 ₹1,38,000 | 10 ₹4,000 Lowest | 250 ₹1,00,000 | 20 ₹8,000 | 80 ₹32,000 | 100 ₹40,000 | 20 ₹8,000 | 65 ₹26,000 | 80 ₹32,000 | 50 ₹20,000 |
| 3.00 | M&L for Remove loose and damaged concrete roof screed in pockets with mechanical cutter. Clean the concrete screed with high pressure water jet to remove dirt and loose particles. Brush apply a bond coat of Pidicrete URP or equivalent mix in the ratio of 1:1 (URP 1 : Cement 1) by volume to make it lump free slurry when applied on in the pre wet surface. Laid to fall roof screed in correct slope and gradient. Mix Pidicrete URP 10 % by weight of cement in concrete in ratio of 1(cement) :1.5 (sand) :3 (12.5 mm aggregate) & avg thickness of concrete should be 25 mm and finish with trowel. Surface should be smooth and even. Before application of water proofing chemical, the roof surface should be cured enough etc complete all as specified & directed | 1,676 | Sqm | 250 ₹4,19,000 | 50 ₹83,800 Lowest | 280 ₹4,69,280 | 250 ₹4,19,000 | 800 ₹13,40,800 | 170 ₹2,84,920 | 275 ₹4,60,900 | 285 ₹4,77,660 | 250 ₹4,19,000 | 625 ₹10,47,500 | 200 ₹3,35,200 | 500 ₹8,38,000 | 100 ₹1,67,600 | 390 ₹6,53,640 | 220 ₹3,68,720 | 450 ₹7,54,200 | 95 ₹1,59,220 | 207 ₹3,46,932 | 210 ₹3,51,960 |
| 4.00 | M&L for apply one coat of primer after dilution of water proofing chemicals in the ratio of 1:1 in complete dry condition where moisture contain below 7% (should be checked with moisture meter). Allow the primer coat to dry for 6 to 8 hours. Apply 1st coat of Roof seal Classic or equivalent water proofing chemical without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 to 6 hours. Apply the second of chemical with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 4-6 hours after application. Check to see no void surface is left untreated / uncoated. Allow the system to air cure for 7 days minimum etc complete all as specified & directed. | 3,000 | Sqm | 520 ₹15,60,000 | 520 ₹15,60,000 | 490 ₹14,70,000 | 400 ₹12,00,000 | 580 ₹17,40,000 | 343 ₹10,29,000 | 560 ₹16,80,000 | 400 ₹12,00,000 | 425 ₹12,75,000 | 625 ₹18,75,000 | 600 ₹18,00,000 | 475 ₹14,25,000 | 710 ₹21,30,000 | 450 ₹13,50,000 | 450 ₹13,50,000 | 450 ₹13,50,000 | 525 ₹15,75,000 | 340 ₹10,20,000 | 300 ₹9,00,000 Lowest |
| 5.00 | Demolition of brick work or stone masonry including all quoins,arches,pillars etc built in CM complete all as specified & directed. | 2 | Cum | 480 ₹960 | 150 ₹300 | 350 ₹700 | 500 ₹1,000 | 300 ₹600 | 100 ₹200 | 150 ₹300 | 455 ₹910 | 350 ₹700 | 150 ₹300 | 400 ₹800 | 900 ₹1,800 | 200 ₹400 | 240 ₹480 | 600 ₹1,200 | 50 ₹100 Lowest | 100 ₹200 | 150 ₹300 | 400 ₹800 |
| 6.00 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed. | 2 | Cum | 6,400 ₹12,800 | 4,200 ₹8,400 | 4,900 ₹9,800 | 4,000 ₹8,000 | 4,800 ₹9,600 | 4,000 ₹8,000 | 5,000 ₹10,000 | 4,125 ₹8,250 | 4,200 ₹8,400 | 4,000 ₹8,000 | 1,500 ₹3,000 Lowest | 3,800 ₹7,600 | 4,200 ₹8,400 | 5,290 ₹10,580 | 5,000 ₹10,000 | 2,000 ₹4,000 | 4,500 ₹9,000 | 4,500 ₹9,000 | 4,000 ₹8,000 |
| 7.00 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed | 600 | Sqm | 24 ₹14,400 | 15 ₹9,000 | 20 ₹12,000 | 50 ₹30,000 | 22 ₹13,200 | 12 ₹7,200 | 40 ₹24,000 | 12 ₹7,200 | 30 ₹18,000 | 10 ₹6,000 | 1 ₹600 Lowest | 77 ₹46,200 | 15 ₹9,000 | 25 ₹15,000 | 30 ₹18,000 | 10 ₹6,000 | 50 ₹30,000 | 15 ₹9,000 | 20 ₹12,000 |
| 8.00 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work / concrete surfaces of cement & finishing the surfaces even and smooth without using extra cement including WPC @ 3% of weight of cement etc all as specified & directed. | 470 | Sqm | 250 ₹1,17,500 | 180 ₹84,600 | 220 ₹1,03,400 | 220 ₹1,03,400 | 240 ₹1,12,800 | 170 ₹79,900 | 240 ₹1,12,800 | 292 ₹1,37,240 | 220 ₹1,03,400 | 200 ₹94,000 | 100 ₹47,000 Lowest | 215 ₹1,01,050 | 170 ₹79,900 | 195 ₹91,650 | 250 ₹1,17,500 | 200 ₹94,000 | 320 ₹1,50,400 | 190 ₹89,300 | 220 ₹1,03,400 |
| 9.00 | M & L for two coat of cement base paint on new plastered surfaces of wall including preparation of surfaces over 2 mm thick putty complete all as specified and directed. | 470 | Sqm | 64 ₹30,080 | 45 ₹21,150 | 80 ₹37,600 | 60 ₹28,200 | 55 ₹25,850 | 20 ₹9,400 Lowest | 55 ₹25,850 | 52 ₹24,440 | 110 ₹51,700 | 50 ₹23,500 | 20 ₹9,400 Lowest | 90 ₹42,300 | 70 ₹32,900 | 35 ₹16,450 | 50 ₹23,500 | 40 ₹18,800 | 120 ₹56,400 | 65 ₹30,550 | 70 ₹32,900 |
| 10.00 | M&L for rendering 10 mm thick cement plaster in CM 1:3 on brick work / concrete surfaces of ceiling,chhajja etc finishing the surfaces even and smooth without using extra cement etc all as specified & directed. | 80 | Sqm | 250 ₹20,000 | 140 ₹11,200 | 190 ₹15,200 | 200 ₹16,000 | 235 ₹18,800 | 190 ₹15,200 | 240 ₹19,200 | 282 ₹22,560 | 185 ₹14,800 | 210 ₹16,800 | 100 ₹8,000 Lowest | 220 ₹17,600 | 170 ₹13,600 | 210 ₹16,800 | 220 ₹17,600 | 180 ₹14,400 | 320 ₹25,600 | 190 ₹15,200 | 250 ₹20,000 |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
30 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (East) Agra
Garrison Engineer (East) Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt-282001
SPECIAL REPAIR TO ROOF OF ADFCR, PPP AND C, TT CELL AND OTHER BLDGS AT 509 ABW UNDER GE (EAST) AGRA
2026_MES_747941_1
9867/E8
Open Tender
Civil Works
Item Rate
180 days
Agra Cantt
Please refer tender documents
10 documents required · 10 mandatory
₹500
GE (East) Agra
₹97,000
Yes
20 Feb 2026
9 Jan 2026
6 Feb 2026
9 Jan 2026
30 Jan 2026
23 Jan 2026
Taking down of All loose and de-bonded concrete/ screed, loose particles, dirt etc & Debris should be removed from Bldg. Roof substrate must be pressure-washed with water with, a minimum working pressure of 1400 psi is to be used to and/or remove all dirt, dust, chalking and waste products. Remove algae, mold by using bleach solution or biowash etc complete all as specified & directed.
M&L for repair of All visible hairline cracks on concrete roof / screed more than 0.50 mm and not giving hollow sound, should be cut and widen in V shape with mechanical cutter in the size (10mm W x 6mm D). Fill cracks with PU sealant / Hybrid Sealant with suitable gun and smoothed with a putty knife or trowel. Allow sealant to cure a minimum (72 Hrs.) 3 days etc complete all as specified & director.
M&L for Remove loose and damaged concrete roof screed in pockets with mechanical cutter. Clean the concrete screed with high pressure water jet to remove dirt and loose particles. Brush apply a bond coat of Pidicrete URP mix in the ratio of 1:1 (URP 1: Cement 1) by volume to make it lump free slurry when applied on in the pre wet surface. Laid to fall roof screed in correct slope and gradient. Mix Pidicrete URP 10% by weight of cement in concrete in ratio of 1(cement) :1.5 (sand):3(12.5 mm aggregate) & avg thickness of concrete and finish with trowel. Moist cure should be done for 7 days. Air cure screed for 7 days, before application of roof top coat coating system etc complete all as specified & directed.
M&L for Apply one coat of Cipoxy 16D primer in the ratio 1:1 spreading at the rate of 0.200 kg-0.250 kg /sqm in complete dry condition where moisture contain below 7% (should be checked with moisture meter)Allow the primer coat to dry for 6 to 8 hours. Apply 1st coat of Roofseal Classic without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 to 6 hours. Apply the second of chemical with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 4-6 hours after application. Check to see no void surface is left untreated / uncoated.Allow the system to air cure for 7 days minimum etc complete all as specified & directed.
Demolition of brick work or stone masonry including all quoins,arches,pillars etc built in CM complete all as specified & directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.
Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed
M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work / concrete surfaces of cement & finishing the surfaces even and smooth without using extra cement including WPC @ 3% of weight of cement etc all as specified & directed.
M & L for two coat of cement base paint on new plastered surfaces of wall including preparation of surfaces over 2 mm thick putty complete all as specified and directed.
M&L for rendering 10 mm thick cement plaster in CM 1:3 on brick work / concrete surfaces of ceiling,chhajja etc finishing the surfaces even and smooth without using extra cement etc all as specified & directed.
Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required, complete all as specified & directed.
M&L for 15 mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface fair & ever without using extra cement complete all as specified and directed.
M&L for two coats of oil bound distemper over a coat of average 2 mm thick wall care putty on new plastered surfaces including preparation complete all as specified and directed.
Taking up or down 20mm dia steel tubing /PPR pipe connections etc ,including cleaning for Refixing or removal from site complete all as specified and directed.
S&F 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for Providing cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges or water tank staging etc complete all as specified and directed.
M&L for Providing cement concrete type B0 1:2:4 using 12.5 mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Taking down rainwater pipes/SWR (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for re-fixing or removal from site measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Soil waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls, floor etc. as per site requirement making good disturbed portion to match the existing including necessary chemicals /solvent complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed
S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve & nipple complete all as specified in SSR Part I including dismantling of old storage tank.
Dismantling asbestos cement (corrugated, semicorrugated sheet/ North light curve, Ridge etc.) sheets in roof coverings complete all as specified and directed.
S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified complete all as specified and directed.
S&F of Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F Plain, galvanised, mild steel sheeting, 1.25 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with self tapping screws as specified complete all as specified and directed.
Dismantling Wall / ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed.
S&F in repair 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23mm x35mm main and 23mm x 27 mm (intermediate) of 30 gauge suitable for false ceiling including GI wire 6 mm thick @ 1200 mm centre to ceter both ways for hanging arragement complete all as specified and directed.
M&L for 4 mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600mm fixed to GI snap grid frame work complete all as specified & directed.
M&L for 5 mm thick PVC Sheet board of size 3' x 2' and mounted on wall with suitable beading including all the necessary arrangements like screw etc and basic specifications written on it etc all as specified & directed.
Supply and fixing in repair LED luminaire 595 mm x 595 mm, 40 watt, 220 V AC, 6500 K recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting complete all as specified and directed.
M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed including taking down / dismantaling of old earthing. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.
M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC conduit medium grade not less than 20 mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, sunk in cast iron/Pressed steel terminal boxes 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint out side, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles including taking down old point wiring etc. Note :Conduit shall be fixed on surface of roof /Terrace with necessary saddles where concealing of conduit is not feasible at no extra cost for one light /fan point controlled by one switch
stage.html
html • 0.10 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.48 MB
BOQ_837586.xls
BOQ • 0.52 MB
tender.pdf
Tender Documents • 0.83 MB
particularspecification.pdf
Additional Documents • 0.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .