Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹34.2 L+₹48,138 (1.43%)Rejected-AOC RZ F1 104 MAHAVIR ENCLAVE PALAM NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L2 | Rejected-AOC higher rate |
Tender Value
Refer Docs
EMD Value
₹86,000
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI
CA NO GE/ND-64/2022-23 ADDN/ALTN TO ROOF FLOOR, PLINTH PROTECTION, TOILETS AND HARDSTANDING FOR P-63 AT ABHM UNDER GE NEW DELHI
2022_MES_559678_1
GE/ND-64/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE NEW DELHI
REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹86,000
27 Jan 2023
25 Oct 2022
24 Nov 2022
25 Oct 2022
22 Nov 2022
8 Nov 2022
Amount
Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land.
Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster incl. Removing un-serviceable material out side MOD land.
M/L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed
M & L for :_ (a) Cleaning the surface , remove dust, dirt , loose particles and unsound substrate and grading with cement mortar (1:4), 10 mm thick, as in slab surfaces, beams, columns, parapet, and junction of walls etc., grading with a slope of 1 in 120 mixed with liquid/integral water proofing compound as per manufacturer's instruction as approved by GE (water proofing compound to be measured separately). (b) Applying evenly a tack coat of water proofing shield primer @ 0.50 Kg / Sqm as a bonding layer over finished plaster surface including cleaning the surface . (c) Over the coat of bitumen bonding layer as above APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm), unrolled and bonded completely to the substrate with side over lap of 75 mm or end over lap of 100 mm. The overlaps are then sealed/ fused by flam technology method as per manufacture instruction. (d) Sealing edges well into grooves & protect with CM 1:2 complete all as specified and directed. Note:- The work for water proofing treatment on roofs shall be executed through original manufacturer's or their authorised applicator.
M&L providing cement concrete as in roof , levelling courses for making proper gradient/slope or mud stops rounded or chamfered on edges with B-1 , 1:2:4 using stone aggregate mixed with water proofing compound as per manufacture instruction including necessary form work complete all as specified & directed. (water proofing compound to be measured separately).
Demolition of cement concrete unreinforced of any description and in any position not other wise specifically provided as in drain copings and similar situations incl removing the unserviceable material out side the MOD land complete all as specified & directed.
M&L for PCC 1:3:6,type C-1 (using 20mm graded aggregate) as in water tank platform mixed with water proofing compound as per manufacture instruction as in roof floors. (water proofing compound to be measured separately).
M&L for PCC 1:2:4 type B-1 (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Supply only liquid water proofing compound.
Material & labour Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, including laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
M&L providing cement concrete in roof kerbs or mud stops rounded or chamfered on edges, with type B-0, 1:2:4 using 12.5mm stone aggregate complete all as specified & directed incl form work etc.
Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing, and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary Portland cement 43grade and 2part of Ghaggar sand mixed with adhesive/admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guniting to be finished fair with 10mm thick plaster in Cement Mortar 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. (All services and work incl internal and external surfaces and members of up to six storey buildings).
Providing and fixing rebar of required length & diameter with Sika anchor fix R-3+/Mungo/Fischer FISV 390/Hilti RE-500 Epoxy resign where ever required in RCC members including power drilling, cleaning of holes then rebar shall be inserted in holes that shall be fixed with epoxy to ensure the bond as per manufacturers recommendation complete as per site requirement and direction of Engineer-in-Charge of 100 mm deep(minimum), 16 mm dia hole suitable for inserting 12 mm dia reinforcement bars.
Providing and fixing rebar of required length & diameter with Sika anchor fix R-3+/Mungo/Fischer FISV 390/Hilti RE-500 Epoxy resign where ever required in RCC members including power drilling, cleaning of holes then rebar shall be inserted in holes that shall be fixed with epoxy to ensure the bond as per manufacturers recommendation complete as per site requirement and direction of Engineer-in-Charge of 100 mm deep(Minimum), 12 mm dia hole suitable for inserting 08 mm dia reinforcement bars.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed by Engr-in-Charge.
Ditto as per item no 15 above here-in-before but 6 to 8 mm dia
M&L polymer modified cement bonding coat, prepared and applied on the concrete/masonry surface with 1 part of Sika latex with 4 part of water and 6 part of cement by weight. Coverage Sika latex 0.25 kg/sqm for one coat at all heights levels. Adhesive bond strength not less than 2.5 MPa. (Make :- Sika/BASE Fosroc/Dr Sunanda) including chipping of the loose concrete all as directed by Engineer-in-Charge..
Taking down cement plaster from brick or concrete surface incl racking out joints hacking for key and scrubbing down with water complete including removal of rubbish off the premises all as specified.
M&L for premix/ready-mix plaster 15mm thick on brick or concrete surfaces of walls, chajja, balconies, beams , columns, manholes etc and similar work in CM 1:4 finished even & smooth without using extra cement over a coat of UltraTech seal and dry 5 plush as bonding agent including necessary scaffolding, form work, safety precaution up to multi storey of bldgs. complete all as specified & directed.
M&L for Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall care putty on new surfaces of external walls / ceiling surfaces after preparation of surface all as specified by Engineer-in-Charge.
M&L for Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over on Old surfaces of external walls / ceiling surfaces after preparation of surface all as specified by Engineer-in-Charge.
Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed.
-Ditto- as per item No 22 above here-in-before but for 20mm dia.
-Ditto- as per item No 22 above here-in-before but for 40 or 50mm dia.
S/F GI tubing ,medium grade, galvanised with all fittings fixed complete to walls and ceilings or laid in floors/walls, roofs etc for 15mm bore pipe concealed / open.
-Ditto- as per item No-25 above but for 20mm bore pipe.
-Ditto- as per item No-25 above but for 40mm bore pipe.
-Ditto- as per item No-25 above but for 50mm bore pipe.
M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed.
S&F gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 15mm dia pipe (ISI Marked)
-Ditto- as per item No-30 but for 20mm dia pipe.
-Ditto- as per item No-30 but for 40mm dia pipe.
-Ditto- as per item No-30 but for 50mm dia pipe.
Dismantling of old PVC water tank of capacity 2000 ltrs incl making connection with fitting for inlet & outlet pipe.
S&F rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 2000ltrs incl making connection with fitting for inlet & outlet pipe.
S&F PTMT ball valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm dia.
Taking down eaves gutter & rain water pipes ( any size or pattern), incl. all fitting, heads , shoes, bends, swan necks, incl cleaning for refixing or removal to store.
S&F 100mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints fixed on walls/floor complete all as specified and directed.
S&F 75mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints fixed on walls/floor complete all as specified and directed.
S&F 100mm dia cast iron bends (any radius) diminishing pieces or tapers ( larger bore measured) (ISI MARKED) complete all as specified and directed.
-ditto- as above item No-40 but for 75mm dia.
S&F branch piece, single, for 100mm dia Cast Iron spun pipe (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
-ditto- as item No- 42 above but 75mm dia
S&F for cast iron cowls for 100mm bore pipe.
S&F for cast iron cowls for 75 mm bore pipe.
S&F stack clamps out of 50 mm X 5 mm flat iron and 16 mm dia round bars incl bolts and nuts and securing ends of stays to walls or on roof fixed in repairs 100 mm bore pipe complete all as specified and directed.
-ditto- as above Item No- 46 but for 75mm dia bore pipe.
Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, drains, culverts and walls etc but excluding ashlar facings, dressed stone work and pre cast concrete articles, built in cement mortar incl removing the unserviceable material out side the MOD land complete all as specified & directed.
M & L for brick work with sub class B burnt bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:4 as in walls, manhole, septic tank soakage well and similar work etc all as specified and directed.
M&L for GI wire netting .90mm dia and 12mm mesh lathing to wood or metal studding, joist, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cuttings and waste complete all as specified.
Dismantling wrought iron or mild steel work of any description any position not other wise provided for complete all as specified and as directed.
S&F welded steel wire fabric, n.exc 4 Kg weight per sqm, cut to length bent to shape required and fixing with and including annealed mild steel wire not less than 0.90 mm dia or fixing with galvanised steel staples or welding supplied and fixed complete to wood or steel members.
M&L framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, welded or forged into spikes framed guard bars, barred doors & walk ways railings frame work of water tank and similar work up to six story bldg. including necessary safety precaution confirming to Fe-290 Gde -E-165
M&L for two coats of synthetic enamel paint on new steel and iron surfaces over a coat of red oxide primer incl preparation of surfaces over 10 cm width of girth.
M&L for 100 mm thick PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in hard standing, paths, floor etc. finished rough surface without using extra cement complete all as specified.
M&L for forming 12mm thick Expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' as in hard standing of any thickness mm complete all as specified and directed.
Dismantling of Stone slabs and tiles any pattern, paver block of any description or thickness in floors, aprons, vertical surface of walls etc..
M&L machine pressed pre cast concrete interlocking decorative paver block PU coated of any size and shape confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment, size and shape of paver as approved complete all as specified and directed.
M& L for Endura chequered tiles of approved colour and design 10 to 12mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in paths, floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.(Make- Johnson Endura tiles)
Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters(without taking off shutters from the frame).
Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters(without taking off shutters from the frame).
S&F powder coated (minimum power coating 50 micron) to aluminium frame / guiding rail for sliding or side hung windows/ventilators frame including jointing cleats, glazing clips and fixing complete with one or more rebates for fixing etc complete all as specified.
S&F powder coated (minimum powder coating 50 micron) to aluminium glazed/gauzed window and ventilators shutters, side hung type( or sliding type) without sash bars, aluminium section weighting 0.55 kg per mtr including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws including fittings such as peg stays 150mm long (2 Nos) to each leaf, hinges 100mm long (2 Nos) each leaf and suitable handle (1 no.) to each leaf complete all as specified.
S&F Aluminium power coated decorative grill of approved colour with 6.3mm thick aluminium section and 100X100mm openings and anodized aluminium 'U' shape channel frame work around the grill for openable type with necessary fittings and locking arrangement complete all as specified and directed.
S&F including taking down Powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size 02 Nos tower bolt 200 mm , sliding bolt 300 mm long 01 No, door handles 200 mm 2 Nos, aluminium butt hinges stainless steel 125 mm 04 Nos, hydraulic door closer heavy duty and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 1.00 mtr in width Make of glass (MODI/FLOAT/ATUL).
S&F stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples .
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading as in aluminium door / window shutter, in square n.exc 0.5 Sqm in each pane.
Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type A-1 using 20 mm graded aggregate (nominal mix ) in slabs supported on walls, beams and columns in floor, roofs, canopies, chajja and in shelves and the like.
M&L for Form work to sides and soffits of floor or roof beams, cantilevers, shelves, chajjas incl supports, overhang for rough finished flat surfaces.
M&L for laying Micro-concrete cement based pre packed single component, chloride free, sulphate free, non shrink, free flow, self compacting, ready to use after mixing water in specified proportion of approved quality. The unit rate shall include the cost of form work for providing micro concrete patch repair as required at site with steel jack system and steel props to support the form work in this application of high strength, dual shrinkage, compensated, micro concrete for placing in nominal thickness of 50 mm to 150 mm for concrete repair. Make:- Sika/BASE Fosroc/Dr Sunanda.
M&L for 75mm thick precast cement concrete ,type B-0, 1:2:4 (12.50 mm graded stone aggregate) as in louvres & jallies ( measured solid), set in CM 1:4 ,complete.
M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulsion, white or tinted over one coat of alkali-resistant primer paint and 3mm thick wall care putty all as specified & directed.
M&L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulsion, white or tinted over one coat of primer including 3mm thick wall care putty complete all as specified & directed.
M&L for preparation of old distempered surfaces by complete removal of existing treatment from ceiling surfaces and applying two of distemper oil emulsion, white or tinted over a coat of primer paint compete all as specified & directed.
M&L for preparation of new plastered ceiling surfaces and applying two coats of distemper oil emulsion white/tinted over one coat of primer complete all as specified & directed.
M&L applying two coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L red colour granite( of any type) 18-20 mm thick table rubbed and polished as in Floor, cooking platform, and the like machine cut laid over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting, making hole of 20 mm dia for gas pipe at suitable location as directed at site and polishing complete.
..Ditto .. All as per item No 78 above but as in vertical surfaces such as dado/skirting laid over and including rendering 10 mm thick in CM 1:4 jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete.
M&L rounding to edges of stone slabs one edge such as steps, cooking platforms and other similar situations complete all as specified.
S&F PFRC circular manhole (medium duty) cover with frame of size 551 to 650 mm dia conforming to IS: 12592 and IS:1726, factory made complete all as directed and as approved by Engr-in-Charge
M&L for rebuilding the section of structural damaged spalled concrete or RCC elements to its original size or as per recommendations by engineer-in-charge in thickness up to 40mm in layers of 20 mm each of average thickness 30mm by providing and applying with pre-batched, one component fiber reinforced cementitious polymer modified mortar having compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 5N/ mm2 (7 days) according to ASTM C 293-79 all as specified & directed .
S&F, cast iron floor trap with Cockroach Proofing CP grating with or without hole including jointing to waste pipes , fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified.
M&L for plane cement concrete 1:2:4 type B-1 using 20 mm graded aggregate (nominal mix ) as in sunken floor mixed with integral water proofing compound as per manufacturer instruction of make:- Dr Fixit or Fosroc or equivalent as approved by GE.
M&L for plane cement concrete 1:5:10 type B-2 using brick coarse aggregate (nominal mix ) as in sunken floor complete all as specified and directed.
S&F vitreous china wash down water closet (Squatt pattern) white complete with provision of lime concrete bed incl valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern. (Make: HINDWARE/PARRY WARE/CERA) Ist quality.
S&F vitreous china wash basin white flat back size 550 x 400 mm including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete including provision of pair or bracket of angle iron 35x35x6mm duly painted with two coat of synthetic enamel paint over one coat of red oxide zinc chromate primer and embedded one end of bracket in PCC 1:2:4 type B-1 bed blocks and cutting for and pinning in ends of brackets in walls and making good all as specified.
S&F 15mm dia Bib taps brass chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
Brass CP mixer (Central hole basin mixer) , for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed. (fixed in repairs) all as specified and directed.
S&F single level exposed shower/wall mixer with provision of connection to exposed shower pipe with connecting legs and wall flange complete as wall mixer for mixing hot and cold water complete all as specified and directed of brass chromium plated all as specified and directed.
Supply and fix brass chromium plated angle valve fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed long shank with cup suitable for 15mm bore pipe, complete all as specified
S&F chromium plated shower rose of size 125 mm with or without swivel joints any size including chromium plated shower arm fixing to steel pipe and union complete all as specified
S&F 15mm size PVC connection 600mm long incl PTMT nuts and PVC washers at both ends screwed both ends for iron pipe complete all as specified.
S&F brass chromium plated toilet paper holder with flat recessed type stainless steel complete all as specified and directed
S&F brass chromium plated Health Faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F brass chromium plated soap dish fixed with steel screw complete all as specified
S&F PVC bath room cabinet mirror of size 500 x 400 mm with single side hung shutter incl. single looking mirror with PVC inner shelves of any colour as specified.
Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic tiles of approved colour and design 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed..
M&L for Glazed ceramic tiles of approved colour and design in vertical surfaces 300x450x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4.
M&L cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :- (a) Providing min 3" concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate admixed with WPC conplast WL . Cement slurry admixed with bonding compound Nitobond AR to be used for bonding of coving with RCC member. Covering CI pipes with PCC 1:2:4 type B-0 using 20mm graded stone aggregate admixed with integral WPC conplast WL (Fosroc Chemicals India Ltd). (b) Drilling 50mm deep holes at a distance of 1m c/c and cleaned with water and air, fixing nozzles of 12mm dia on drilled holes, injecting non shrink cement slurry at a pressure of 40 psi and nipples plugged with quick setting compounds. (c) Applying 2 full coats of brush bond acrylic emulsion based elastomeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat. (d) Applying 15mm thick plaster in CM 1:4 admixed with WPC conplast WL after ponding test for a period for 72 hours of sunken floor . (e)GI tubing 40 mm dia of medium grade for spout of 150 Cm long for each sunken floor. Note :- Plastered surface area shall only be measured for the purpose of payment.
S&F for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges
M&L for pre-cast cement concrete block masonry with solid blocks 1:2:4 type-B1 (using 20mm graded stone aggregate) as in kerbs stone exc. 10 cm in width and setting in mortar as approved by GE, complete all as specified and directed.
Ex Serviceman Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .