Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC 35 DHARSA MAHITAL KHAN S BYE LANE JIGACHA MUKHERJEE PARA HOWRAH PIN 711112 | HOWRAH | HOWRAH | WEST BENGAL | 711112 | L1 | Accepted-AOC Project has been Done | |
| 2 | L2₹5.1 L+₹11,488 (2.33%)Rejected-Finance AT SCHOOL BAZAR PO MIDNAPORE PASCHIM MEDINIPUR 721101 | MIDNAPORE | PASCHIM MEDINIPUR | WEST BENGAL | 721101 | L2 | Rejected-Finance bidder is not L1 | |
| 3 | L3₹6.0 L+₹1.0 L (20.8%)Rejected-Finance JHCTAJAMBONI MOHOBONI KESHPUR PASCHIM MEDINIPUR | KESHPUR | PASCHIM MEDINIPUR | WEST BENGAL | L3 | Rejected-Finance bidder is not L1 |
Tender Value
Refer Docs
EMD Value
₹9,885
Closing Date
13 Sept 2022, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
OFFICE OF THE EXECUTIVE ENGINEER JHARGRAM ELECTRICAL DIVISION, P.W.Dte. Panch Matha More, ,Jhargram Pin -721507,
Implementation of the schemes under Comprehensive Infrastructure Up-gradation of BPHC/RH PHC within Jhargram Repair renovation of Electrical Installations at Ramgarh PHC
2022_WBPWD_400537_1
WBPWD/EE/JED/eNIQ24/2022-23
Open Tender
ELECTRICAL WORKS ORG
Item Rate
20 days
Jhargram
Please refer Tender documents.
3 documents required · 3 mandatory
₹9,885
6 Dec 2022
1 Sept 2022
15 Sept 2022
6 Sept 2022
13 Sept 2022
6 Sept 2022
Amount
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (make-Finolex/Havells/Glostar/Kei) for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.(Average run 8 mtr)
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish ( on board)
Fixing& replace only single/twin fluorescent/LED light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EIconduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
Supply & delivery of the following items:
40W LED tube light, [Make-CG, Cat no- CCS-100-40-65-SL-DP-NWH/(equivalent philips or Havells as per direction EIC)
20W LED tube light, make-CG, Cat no- CCS-103-20-65-SL-DP-NWH/(equivalent philips or Havells as per direction EIC)
S & f ac celing fan with all accessories of down rod ,canopy fork,blades etc . (without regulator) by 2*1.5 sqmmcupper wire as per GS. (make -Usha striker plus/ Orient Quasar/ Crompton Greaves Zappar]
250v 1200 mm sweep (48")
Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.
Supply & Fixing full metal body AC cabin fan 16” sweep with net guard and all accessories(Make Orient 450 mm Tornado Wall II-Gun Metal)/ EPC/ Usha)
S&Fixing Angular batten Holder (Anchor)
supply & fixing 240v 15watt LED lamp on existing batten (make Havells,cat no-LHLDEREEMK8X015/or equivalent-Philips/CG as per direction of Eic)
Supplying & Fixing LED bulk head light fitting (Havells make, cat no.-RUGBYNEONFT10WLED860SSYMTOPC/or Equivalent Philips/CG as per direction of EIC)
S&F exhaust fan with louver shutter/cowl after making hole in wall & making good damages & smooth cement finish etc. As practicable as possible & providing necy. Length of PVC insulated wire & making connection for exhaust of following dia.
a. 250V 9''dia (make EPC / orient make heavy duty)
Supply & Fixing 240 V, 25, plug socket with separate 25A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
S& F 25A modular plug top (indicator type)- make- Crabtree/ Anchor/ L&T /Vinay (as per choice of EIC)
Replacement of old fittings &Supply & fixing LED tube light, make-Philips,Essential InstantFit 18W 2100lm, T8, 6500k (Glass boby, Direct Retrofit on Electronic ballast / DIY)
Replacement & Supply & Fixing of 6A switch (make-ANCHOR/HAVELLS)
Replacement & Supply & Fixing of 6A 5 pin plug socket (make-ANCHOR/HAVELLS)
Replacement & Supply & Fixing of 15A switch (make-ANCHOR/HAVELLS)
Replacement & Supply & Fixing of 15A 5 pin plug socket (make-ANCHOR/HAVELLS)
Taken down the ceiling fan from its original position & refixing the same in its original position as per direction of E.I.C.
S&F of split pin
Cleaning the fans body part by part by kerosene oil incl. Refitting the same after necy. Inspection/repair/replacement of damaged item
Vernishing the armature also changing loop with S&F supper enameled copper wire, cotton tube etc. Baking as per direction of EIC
S &F ball bearing after dismantling of existing damaged one.
i) 6201(Make TATA) / 6202(Make TATA) / 6203(Make TATA)
S&F of ceiling fan 2.5 mfd condenser
S&F of ceiling fan rubber insulator
s&f nut bolt of suitable size for holding rubber insulator with drilled hole incl. Providing of split pin
Supply & fixing 250 v 2no 3 pin 6 A flush type plug socket with 2no 6 A piano key type switch (Anchor make)switch on sheet metal box with bakelite top cover & earthing attachment incl S&F sheet metal box of size 175 *100 (16 swg) with 3 mm thick bakelite top cover.
Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
S&fixing 250 v 6 to 10 A per way , SPNMCBD with SS enclosure double door with IP - 42/43 protection with 40A DP MCB as incomer and 16 no SP MCB (C - Curve 10 ka) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (Make:Legrand / L&T/Siemens as per choice of EIC) (2+ 16) way.
Supply & fixing 415 v 16to 32 A per way , TPN MCBDB with ss enclosure double door with IP 42/43 protection with 4 pole isolator as incomer and SPMCB (c curve 10 ka) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment. 6 way,63 A TPN MCB & 18 no SPMCB (C-Curve 10 ka) (MAKE- l&t / Legrand/ siemens)
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection
a. 6-32A (SP MCB)
b.40 A DP MCB
Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Finolex/Anchor/Havells/Kei/Glostar Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required
a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
b. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
c. 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Finolex/Anchor/Havells/Kei/Glostar Brand approved by EIC) of the following sizes in the 25mm dia rigid conduit polythene pipe and by the rigid conduit GI fish wire and making necy. connection as required
a. 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.
Renovation of Main pannel,all main switch and BBC RE-installed in wall &inter connected with 2x16 (Finolex/Anchor/Havells/Kei/Glostar) sq mm cu wire or 2 core 25 sqmm ( Make Gloster/ polycab/ havells/KEI ) cu cablewire & Pipe on surface, also proper socketting ,including repairing of existing Busbar as per direction of EIC & also renovated existing busbar & re-installed of existing cange over switch with proper connected with BBC.(indoor section building panel only)
Fixing of existing Glow Sign Board on wall/Parapit wall with nuts bolts washers or fastner etc also inter connected with loop box & cable as per direction of EIC.
Fixing only outdoor / street light type fluorescent/LED light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
S& f of 40W Rooftop light (as per direction of EIC). CG make cat no.-LSTS-40-CDL-M/or equivalent make-Philips/Havells as per direction EIC.( ROOF TOP LIGHT)
Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required
S&D of Flood Light (make-CG, cat no- CFS-504-50-30-60D-SL-GL-NSG or equivalent Philips/Bajaj as per direction of EIC.)
Supplying & Fixing PVC waterproof type looping cable box comprising of one 250 V 15 A kit-kat fuse unit 4pole star connector, one compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted PVC top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint(make: Sintex/equv. as per choice of EIC)(4 no for OD light + 2 no for Glow sign board)
S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe.
Painting of pole 2 coat aluminium painting on mini pole and arm bracket of length 2 mtr each with 2 coat of ready mixed synthetic enamelled paint over 1 coat of primer of apporved make,and brand incl.preparation of surface by sand paper/emery paper,leaning etc.for receiving fresh coat of paint.
Supplying and fixing 240v, 32A MCB Isolator on din rail of DBs and necessary connection in 2 way enlosure box..(1 no for Roof Top)
supply and delivery of the following cable:
a.2 core 10 sqmm 1.1 kv grade( Make Gloster/ polycab/ havells/KEI )
a.4 core 25 sqmm 1.1 kv grade( Make Gloster/ polycab/ havells/KEI )
Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting
Laying of cable upto 4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed
Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
Supplying & fixing 50 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
a. 2 core 10sqmm
Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials :
a.2core 10sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
4 core 25 sqmm
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
4 core 25 sqmm
supply & fixing of 2.5ftx3ft 6mm Hylum/ bakelite board on wall with 4 no MS fastner & supply & fixing 415V, 3 nos. 63 A kitkat fuse & 1 no. Neatrual link on board.
supply & fixing of 1ftx1.5ft 6mm Hylum/ bakelite board on wall with 4 no MS fastner & supply & fixing 415V, 1 nos. 32 A kitkat fuse & 1 no. Neatrual link on board.
S&F Submersible Pump Controller-1 Hp,0.75 Kw,Relay Max Range- 9-14A [Make: L&T, Cat no- SS96560/ Havells/ Standard].
Supplying and fixing 125A Sheet steel Main Switches on angle iron frame on wall,also interconnected with BBC with suitable size of cable or wire.(make-Standard/Havells/HPL as per direction of EIC)
Supplying and fixing 415V, 63A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.
Supplying and fixing 32A, 240V DP with fuse on L&N Sheet steel Main Switches on flat iron frame on wall.(make-Standard/Havells/HPL as per direction of EIC)
Supplying and fixing 16A, 240V DP with fuse on L&N Sheet steel Main Switches on flat iron frame on wall,also interconnected with BBC with suitable size of cable or wire.(make-Standard/Havells/ HPL as per direction of EIC)(for Roof top light & Pump)
Excavation of soil for installation of Earth Electrode and filling & ramming[ morrum soil]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level (Tata medium)
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc
Extra of treatment of soil by using salt & charcoal for pipe electrode.
Dismantling of existing wiring,switch board,light,fan, cut-out fuse & industrial pannel etc. And handing over the same to the JE as per direction of EIC.
SREE KRISHNA ELECTRICAL
MIR ENTERPRISE
technical_786239.pdf
PDF • 0.27 MB
techsummary_786239.pdf
PDF • 0.14 MB
finance_786239.pdf
PDF • 0.27 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_786239.pdf
PDF • 0.14 MB
ENIQ24.pdf
PDF • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .