Replacement of Old and Damaged Wiring, lighting and Repairing of plinth and other associated work at Transformers repair workshop Sitapur

Amount

Wiring for light point/with 1.5 sq.mm Pvc insulated Aluminum Conductor cable in surface medium class conduit with modular switches size m-5 box, mica sheet and connection with the earth point etc. as required.

Wiring for light/Power plug with 2x4 sq.mm Pvc insulated copper conductor single core cable in Pve conduit along with 2 No. 4 Sq mm Pvc insulated Al conductor for loop earthing as required.

Supply & Fixing of Metal Box of following sizes on surface increases with suitable size of mica sheet cover etc. as required 10x12.

Providing & fixing of following Capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI mark male, female socket including drilling holes in wall and making connections etc. as required.

1. 32 Amp. TPN 3 Phase 440 Volt

2. 63 Amp. TPN 3 Phase 440 Volt

3. 100 Amp. TPN 3 Phase 440 Volt

Providing & fixing and installation of following Capacity end feed unit mode of 1.6 mm thick sheet steel enclosure duly painted with powder coating to exist rising mains complete with TPN disconnector bus bar, mounting stand cable & lugs connections as required.

1. 200 Amp. TPN 3 Phase 440 Volt

Supply &lying 6swg GI Wire at 0.50 mtr. Below ground level for Conductor earth electrode from existing earthing to the shade including connection with GI thimble, spring washer etc. as required.

Supply / laying/ fixing of following size pvc insulated Alu. Cable on surface of wall of shed proper connections with main switches.

(A) 4x16 sq. mm

(B) 4x25 sq. mm

Supply and Wiring of follwing capacity PVC insulated Cu. Wire

(A) 2.5 sq. mm

(B) 4.0 sq. mm

Supply and fixing of following capacity modular switches.

A. 5 Amp. Switch Single phase 220 Volt

B. 5 Amp. Five Pin Socket Single phase 220 Volt

Reconstruction of plinth of size 2x2 mtr. For Distribution t/f having 1.2 mtr. Above ground level. The work including excavation of foundation base condreting in CC 1:6:12 ratio ( cement fine sand & brick ballast) first class brick work in cement morter of ratio 1:4 foundation CC in 1:4:8 ratio ( cement fine sand & brick blast) and RCC working ratio 1:2:4 ( cement coarse sand and stone grit of 20mm gauge using MS Bars of 10mm dia ( tor ) in reinforcement including its cutting, bending & binding in required shape the plinth will be made as per drawing and shall be plastered/finshed on top and sides of the plinth.

Fabrication and erection of wire mesh fencing with toe wall 10swg (37mmx60mm) wire mess fencing inclouding its grouting on new toe wall at the civil matterial angle 50x50x6mm etc. shall be arranged by the contractor and duly painted with two coat primer and green enamel paint.

M/S S.K. CONTRACTOR AND SUPPLIER

Anil Kumar Yadav