PROVN OF KITCHEN CABINETS FOR 160 X ORs MD ACCN AT ZORAWAR MARG, ITARANA MIL STN, ALWAR

S&F factory-made kitchen wall cabinet above kitchen cooking platform or other platform, fabricated from 18 mm thick PVC Celluka board having density not less than 650 kg/cum, one face finished with decorative laminate and the reverse face with balancing laminate, manufactured by an ISO 9001:2015 certified company and conforming to the specified requirements for termite resistance, water resistance and flame retardancy, comprising cabinet carcass, shutters and backing, all fabricated from 18 mm thick PVC board. Cabinet shall be of required size with vertical depth of 0.60 m and horizontal depth of 0.30 m, incorporating two vertical partitions, one horizontal shelf and two-leaf shutter arrangement, with the cabinet box divided into two equal compartments. All panels shall be accurately cut, aligned and assembled using suitable solvent cement adhesive and screws wherever required to ensure rigid joints and dimensional stability. All exposed edges shall be finished with 2 mm thick edge-bonding tape or 90-degree edge-bent finish, as applicable to the approved make and system. Item shall include all necessary brackets, screws, fasteners, fixing angles, wall-mounting arrangements, fittings and fixtures for complete installation in position. Each shutter shall be provided with 75 mm long stainless-steel handle, CP-finished piano hinges, magnetic catch/catcher, cupboard knobs and clips, complete with all accessories required for proper operation and alignment. The cost of all hardware, fittings, fixtures, adhesives, screws, fasteners and fixing accessories shall be deemed included in the quoted rate; no extra payment shall be admissible on this account. The cabinet shall be installed true to line, level and plumb, strictly in accordance with approved drawings, specified make and manufacturer's recommendations, to the entire satisfaction of Engineer-in-Charge. Measurement for payment shall be based on the area of the front elevation only.

S&F factory-made kitchen base cabinet below kitchen cooking platform or other platform, fabricated from 18 mm thick PVC Celluka board having density not less than 650 kg/cum, one face finished with decorative laminate and the reverse face with balancing laminate, manufactured by an ISO 9001:2015 certified company and conforming to the specified requirements for termite resistance, water resistance and flame retardancy, comprising cabinet carcass, shutters and associated panels fabricated from 18 mm thick PVC board, of required dimensions to suit the available space and approved drawings. All panels shall be accurately cut, aligned and assembled using suitable solvent cement adhesive and screws wherever required to form a rigid and stable cabinet assembly. All exposed edges shall be finished with 2 mm thick edge-bonding tape or 90-degree edge-bent finish, as applicable to the approved make and system. Item shall include all necessary brackets, screws, fasteners, fixing angles, supporting and fixing arrangements, fittings and fixtures required for complete installation below the cooking platform. Each shutter shall be provided with 75 mm long stainless-steel handle, CP-finished piano hinges, magnetic catch/catcher, cupboard knobs and clips, complete with all accessories required for smooth operation and proper alignment. The cost of all hardware, fittings, fixtures, adhesives, screws, fasteners and fixing accessories shall be deemed included in the quoted rate; no extra payment shall be admissible on this account. The cabinet shall be installed securely, true to line, level and plumb, in accordance with approved drawings, specified make and manufacturer's recommendations, to the entire satisfaction of Engineer-in-Charge. Measurement for payment shall be based on the area of the front elevation only.

Demolition of reinforced cement concrete in roofs, floors other than ground floors, beams, staircases, landings, chajjas and similar suspended work, including removal of reinforcement as applicable, complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved to any radius, half-brick thick, built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster of any description from brick or stone walls, ceilings etc., including raking out joints, hacking surfaces for key, scrubbing down with water and preparing surfaces for subsequent treatment, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces or other than fair faces of brickwork or concrete surfaces, finished even and fair without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces of ceilings, finished even and fair without using extra cement, complete all as specified and directed.

M&L for coloured non-skid ceramic tiles, size 300 x 300 mm and 7–8 mm thick, in floors etc., laid over and including 15 mm thick screed bed of cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for first-quality glazed coloured ceramic tiles, size 300 x 600 mm and 7–8 mm thick, in vertical surfaces, joint-free, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for 20–22 mm thick granite of any type, table-rubbed and polished, as in cooking platforms, shelves and the like, laid/fixed in cement mortar 1:4, including pointing in white cement, complete all as specified and directed.