E-Seva Kendra Court Building Campus at K V Kuppam

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The Outer frame: 63.50 x 38.00 x 3.00 mm at 1.72 kg/m, Centre mullions: 3.50 x 38.00 x 3.00mm at 1.55 kg/m, Aluminium Clips: 17.27 x 17.15 x 1.50mm at 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m x 2.10m covered with 5.50mm thick plain glass with neccessary aluminium clips of size 17.27 x 17.15 x 1.50mm at 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specificationss and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specifications 1868/1962 / and should be got approved by the Executive Engineer before use on work

Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top. The outer frame shall be with aluminium box section 101.60 x 44.45 x 3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50.00 x 44.45 x 2.50mm @ 1.292 kg/m, Bottom rail: 100.00 x 44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50.00 x 44.45 x 2.50mm @ 1.292 kg/m, Alu Clips: 17.15 x 17.27 x 1.50mm @ 0.176 kg/m, Alu. Handle: 100 x 30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250 x 12mm - Each., aluminium tower bolt 200 x 12mm - 1No., aluminium Hydraulic door closer - 1No., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specifications and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete. Aluminium sections and furniture fittings shall be got approved by the Executive Engineer incharge. (Single Leaf).

Supplying and fixing of waterproof tarpaulin sheet tripal, UV resistant, HDPE UV treated Sun, Roof, Rain Protection polyethene multipurpose cover (15 feet * 12 feet, blue) 120 GSM-Thickness) metal eyelets and reinforced edges to hold securely, with rope etc

Supplying and fixing of PVC vinyl flooring of ISI grade, 2mm thickness of approved shade after removing the existing damaged flooring composition, vinyl in nature. Durability: Excellent complying B.I.S standards, Fire resistance, should not support combustion, sound absorption :> 5db it should not be affected by petrol, alcohol, alkali, 5% acids & cooking oil, Fungi & bacteria resistance including labour charges etc complete.

GST @ 18 %