REPAIR/MAINT OF INTERNAL ELECTRIFICATION SUB MAIN WIRING AND CONNECTED WORKS OF MD AND OTM ACCN OF CMM AND ADJACENT AREA OF CMM UNDER AGE (E/M) OF GE (EAST) JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing adjacent to main switch board including making good to disturbed surfaces to match with existing surfaces complete all as specified and directed.

Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for Point wiring with PVC insulated sheathed stranded copper conductor cable FRLS of size 1.5 Sqmm, stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface complete all as specified and directed. Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Rate is inclusive of cutting/chases of wall/floor/ceiling.

One light point controlled by one, one way switch.

One ceiling /exhaust fan point controlled by one switch and regulator.

One 3 pin 5 amp socket outlet point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board.

One bell/buzzer point controlled by one bell push.

One light point controlled by two, two way switches.

All as per Srl Item No 5 above but for one socket outlet 5 Amps on independent board with 2.5 Sqmm cable and 1.5 Sqmm earth wire complete all as specified and directed.

All as per Srl Item No 5 above but for one socket outlet 15 Amps on independent board with 4 Sqmm cable and 1.5 Sqmm earth wire complete all as specified and directed.

M&L for switch piano flush type single pole one way 6 Amps complete all as specified and directed.

S&F switch piano flush button type two way 15 Amps complete all as specified and directed.

S&F socket out let 2 in one, 3 pin, 6 Amps complete all as specified and directed.

S&F switch socket combination 6 Amps, 5 pin flush type complete all as specified and directed.

S&F switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F call bell/buzzer AC-230 Volt single pole ding-dong complete all as specified and directed.

S&F bell push, flush type 5 Amps complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F lamp holder, PVC/ polycarbonate type with back plate for angle holder complete all as specified and directed.

S&F LED lights fitting 1 x 20 Watt, 220 Volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1 x 16 Watt, 220 Volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED building security light fitting 35 Watt, 230 Volt, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F round shape 12 Watt, 220 Volt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 Watt, 220 Volt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 Feet, 5 Watt, 220 Volt, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Fabricate, supply & fix GI pipe bracket 25 mm dia, 1.5 m long & 2 set of clamps made out of 30 x 5mm ms flat & fixed with anchor bolt suitable for 25 Watt security light fitting including taking down of old bracket complete all as specified and directed.

S&F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 20 Amps, flush mounting type complete all as specified and directed.

Taking down ceiling fan /exhaust fan of any size or make complete all as specified and directed.

Hanging only ceiling fan 1200mm/1400mm/1500mm during wiring sweep by providing fan hooks in proper manner and making connection with 3 Core copper cable after painting complete all as specified and directed. Note - Painting of fan should be excluded from this item and shall be considered seperately)

Hanging only exhaust fan and connecting up including provision of cable from ceiling rose/ connector to fan complete all as specified and directed.

S&F capacitor 2.5/4 MFD suitable for ceiling fan/exhaust fan complete all as specified and directed.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces complete all as specified and directed.

S&F Sheet Metal enclosure for TPN DBs, powder painted with bus bar 200 Amsp rating, neutral link, IP-43-IK09 protection grade, 415 Volts TPN with 4 way double door complete all as specified and directed.

S&F Sheet Metal enclosure for SPN DBs, powder painted with bus bar 200 Amsp rating, neutral link, IP-43-IK09 protection grade, 415 Volts SPN with 4 way double door complete all as specified and directed.

S&F Sheet Metal enclosure for SPN DBs, powder painted with bus bar 200 Amsp rating, neutral link, IP-43-IK09 protection grade, 415 Volts SPN with 8 way double door complete all as specified and directed.

S&F Sheet Metal enclosure for SPN DBs, powder painted with bus bar 200 Amps rating, neutral link, IP-43-IK09 protection grade, 415 Volts SPN with 12 way double door complete all as specified and directed.

Note for Srl Item No. 30 to 34 above :- (i) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall/DB tobe fixed on wall including frame made out of MS flat 40 x 5mm (ii)The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

Supply only PVC insulated unsheathed bright annealed bare copper conductor 1 Sqmm cond. const (NO./Dia mm) (32/0.20) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 Volt as per IS 694:1990 as site requirement and complete all as specified and directed.

Supply only PVC insulated unsheathed bright annealed bare copper conductor 1.5 Sqmm cond. const (No./Dia mm) (30/0.25) single core industrial cable & PVC insulated, PVC round sheathed multicore indistrial cable for voltage grade up to 1100 Volt as per IS-694:1990 as as site requirement and complete all as specified and directed.

Supply only PVC insulated unsheathed bright annealed bare copper conductor 2.5 Sqmm cond. const (No./Dia mm) (50/0.25) single core industrial cable & PVC insulated, PVC round sheathed multicore indistrial cable for voltage grade up to 1100 Volt as per IS-694:1990 as as site requirement and complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC Conduit alongwith earth wire with the 2 x 4.0 Sqmm + 1 x 2.5 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/recessed as required complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC Conduit alongwith earth wire with the 2 x 6.0 Sqmm + 1 x 4.0 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC Conduit alongwith earth wire with the 2 x 10.0 Sqmm + 1 x 6.0 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC Conduit alongwith earth wire with the 2 x 16.0 Sqmm + 1 x 10.0 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

S&F triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 415V, 63 Amps complete all as specified and directed.

S&F MCB SP 63 Amps Isolator 240 Volts complete all as specified and directed.

S&F MCB SP 40 Amps Isolator 240 Volts complete all as specified and directed.

S&F Isolator DP 40 Amps, 240V complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 215 Volt complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10 Amps, 215 Volt complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Part-I (2009) including PCC foundation/chamber in mix 1:2:4 type B-1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Make : L&T/HPL/Scheinder confirming to IS-16444. Note - Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 25 x 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade crushed stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, charcoal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n.exc 50M and providing connection points with MS/GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Taking down partly unservicable tube light fittings any type,and fixtures, etc, and refixing the same after repair complete all as specified and directed.

S&F LED Lamp/bulb of 9 Watt complete all as specified and directed.

S&F LED Lamp/bulb of 18/20 Watt complete all as specified and directed.

S&F Lamp/bulb 40 Watt complete all as specified and directed.

S&F PVC rectangular block of size 100 x 100 x 50mm for mounting switches, sockets/fan regulator, etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 175 x 100 x 50mm for mounting switches, sockets/fan regulator etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 200 x 150 x 50mm for mounting switches, sockets/fan regulator etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 250 x 200 x 50mm for mounting switches, sockets/fanregulator etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 350 x 300 x 50mm for mounting switches, sockets/fan regulator etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F modular switch 1 way, 6 Amps, 1 module complete all as specified and directed.

S&F modular socket outlet, 6 Amps, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch socket combination 6 pin, 3 module, 16 Amps complete all as specified and directed.

S&F modular Bell push 6 Amps, 1 module complete all as specified and directed.

S&F modular electronic regulator 100/120 Watt step type complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volt, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&L for painting of ceiling fans complete, in situation with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M&L for checking the unserviceable geysers and making serviceable by replacing the thermostate/heating element, PVC connection etc as per site requirement and tightening the connection, adjusting the thermostat, checking the power point of geyser and making servicing by tightening/replacing screws/ replacing the small piece of wire etc complete all as specified and directed. Note - (i) Petty stores like insulation tape, screws, small piece of cable, etc shall be provided by the Contractor without any extra cost to the department. (ii) (b). Replacing the PVC connection, Heating element and thermostate shall be measured & paid separately.

Supply and fixing in replacement of heating element thread type 3.0 KW and fixed at solar water heater tank complete with 9" long thermostate veriable type complete with ISI Mark complete all as specified and directed.

M&L in Replacement of Gl tubing medium grade 15mm bore with fitting , fixed to walls and ceilings or laid in floors complete all as specified and directed. Make- Tata, Swastik, Jindal, Prakash, Surya.

S&F in replacement of bib cock 15mm bore cast copper alloy as per side requirement with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

All as per srl item No 69 here-in-before but Angle cock/stop cock 15 mm dia complete.

S&F geyser thermostat of ISI marked, suitable for 20 degree to 80 degree centigrade in 25/50 liter capacity geyser complete all as specified and directed.

S&F heating element (triangular type) for 25 ltr Geyser of 2 KW rating to fulfill the requirement of geyser with complete accessories all as per site requirement and complete all as specified and directed.

S&F heating element (circular type) for 25 ltr Geyser of 2 KW rating to fulfill the requirement of geyser with complete accessories all as per site requirement and complete all as specified and directed.

Schedule of credit amount of Rs. 66,474.00 to be deducted during AOC.

S K TRADERS

M/S CHETAN PRAKASH GOYAL

ELCON

MAYANK CONSTRUCTIONS