1034/HIDCO/AGM(III/NIT94(2nd call)/22-23

Amount

Demolition Concrete -PCC DEMOLITION Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.

(a) upto 150 mm. thick

b) above 150mm thick

Extra rate for each addl. Floor over the rate of ground floor

Concrete RCC DEMOLITION Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof

Extra rate for each addl. Floor over the rate of ground floor

Brickwork Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Extra rate for each addl. Floor over the rate of ground floor

MS Structure Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed.

(b) Add extra for each addl. Floor

Paint removal Removing thick layers of paint from heavily cracked and blistered painted surface of timber by careful burning with blow lamp including smoothening exposed surface of timber with pumice stone or glass and preparing the same for fresh treatment.

Removal of existing paint by desired tools and tackles without damaging existing plastered / brick surface, cleaning surface thoroughly to make it free from loose particles and the surface should be ready for applications of primer and paints

Debris removal or stacking beyond 100 mtr from the area of origin Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Dismantling

Metal Grill Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works.

Terracotta Tali Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof

b) Extra for each addl. Floor over the rate of gournd floor

Civil works

PCC upto 75 mm Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement, if any, in gound floor as per relevant IS codes. Pakur variety

PCC upto 75 mm repair work Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety

PCC greater than 75 mm

Brickwork Brick work with 1st class bricks in cement mortar (1:4)

a) In foundation and plinth

b) In Super structure, ground floor.

Plaster Plaster (to wall, floor, ceiling etc.) with composite mortar of sand, lime and cement including round off or chamfering corners as directed and raking out joints and roughening of concrete surface including throating, nosing and drip course where necessary (Ground floor).

(i) With (1:2:9) composite mortar with 1 cement : 2 lime paste/putty : 9 sand

(a) 35 mm. thick plaster

(b) 25 mm. thick plaster

(c) 20 mm. thick plaster

(d) 15 mm. thick plaster

(ii) With (1:1:6) composite mortar with 1 cement : 1 lime paste/putty : 6 sand

(a) 20 mm. thick plaster

(b) 15 mm. thick plaster

(c) 10 mm. thick plaster

Structural Steel - Band as Lintel and Mullion Supplying,hoisting,fitting and fixing R.C.C. precast thin lintels, 75 mm. thick (1:1.5:3) conforming to the specification laid down in C.B.R.I. data sheet No.1 with stone chips, sand, cement and reinforcement (both main and distribution) bars upto 1.00 percent as per drawing and specification including placing in situ and supporting arrangement for taking the load of super-imposed brick work and striking of the same when directed.

RCC Beam, Column and Slab Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] -M25

Waterproofing work

Waterproofing treatment Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required

Cutout/ plumbing joints waterproofing Cleaning the pipe penetration areas to ensure the surface and sealing the area to stop the water seepage

V-groove Repairs to cracks in terraced roof by cutting V-grooves 75 mm. to 100 mm. deep and 150 mm. to 200 mm. wide and filling the same with beaten lime concrete (2:2:7) with lime putty / paste and finishing complete (2 lime putty / paste : 2 surki : 7 brick khoa )

Protection screed Concrete Providing and applying 15-20 mm thk protection screed on waterproofed surface with admixutures of approved make.

Core cutting Providing & making Core cutting of holes in Brick/RCC floors/Columns/Beams/Slabs/retaining walls etc.(including cutting of reinforcement bars/plates if any)making good by approved specialised agency, including all labour, machinery, tools, tackles etc strictly as per design & drawing requirement and as directed by Engineer-in-Charge.

150 mm dia depth upto 450 mm

100 mm dia depth upto 450 mm

Existing MS Structure Grouting Grouting of existing MS structure with PCC of grade M-20.

TMT Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

(a) For works in foundation and upto roof of ground floor/upto 4 m

(i) Tor steel/Mild Steel

I. SAIL/ TATA/RINL

(b)Add extra over the rate of ground floor/initial 4 m for each basement floor and each additional floor below/ above ground floor

(i) Upto 4 th floor roof in each addl. Floor

Blue sheet Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) a .5mm thick

APP membrane Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse rection and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)

Shingle fixing Providing and fixing of 12 mm thick 2440mm X 1220 mm Fibre Cement Board on MS Framework of 2” x 2” x 2 mm MS grid work.The Boards are jointed in staggered form and edges filled with water resistant sealants. Next on the top surface 1.5mm thick Bitumin Membrane-SBS- Self Adhesive waterproof membrane is applied. Further 8 mm thick 150mm X 3000mm uncolored Fibre Cement Board designer wooden teak finish plank is fixed in overlap pattern. All Planks and Boards are applied with one coat of Paint on the reverse side .All edges will be sealed with sealants ready for Paint.(Rates are Exclusive of MS framework & any painting work)

Floor and cleaning, slurry removal for civil and flooring workChipping of floor and wall for bonding of civil, flooring or finishing work Floor and cleaning, slurry removal for civil and flooring work

Chipping of floor and wall for bonding of civil, flooring or finishing work Labour for Chipping of concrete surface before taking up Plastering work.

MS Sheet Providing and fixing of 3mm thk MS sheet of approved make on steel frame work with necessary welding and bolting as per direction of EIC

Surface Dressing Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed

Excavation Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Earth Filling Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Sand filling Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

SBFS Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Shuttering Hire and labour charges for shuttering with centering and necessary staging upto 4m. using approved stout props and hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.9 to 12mm thick film face ply board shuttering in any concrete work.

Flooring

Flooring Vitrified Tile Flooring Providing and fixing vitrified floor tiles of Size 600x600 mm (approx) and thickness more than 8 mm fover cement mortar bed 20 mm thick in prop 1:4 (1 cement : 4 coarse sand) and 2 mm thick cement slurry at back side of tiles useing cement @ 2.91 kg/Sqm and joint filling with grouting material of matching colour including cleaning and cutting where necessary complete at all levels as specified and directed. Size not Iess than 600mmX 600 mm X 9.5 mm thick ( Make : Kajaria/ Nitco/Somany/Johnson/Hindware )

Vitified tiles of base Rate Rs 140.00 per sqft

Skirting of 100 mm height of same shade as above

Vitified tiles of base Rate Rs 110.00 per sqft

Skirting of 100 mm height of same shade as above

Vitrified tileof base rate Rs 80.00 per sqft

Skirting of 100 mm height of same shade as above

Paver tile Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5.a) 25 mm thick Tiles as per IS: 1237-2012 for footpath,ramp,staircase of public building(over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at back side of Block. Cement for Mortar & Slurry to be supplied by Department).

COLOURED DECORATIVE

50 mm thick interlocking designer concrete paver block M30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658-2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.)

COLOURED DECORATIVE

IPS Flooring Providing & laying 35 mm thick artificial stone floor (P.C.C. flooring), dado, staircase etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone chips) laid in panels as directed with 3mm thick topping made with ordinary grey cement and marble dust in proportion (2 : 1) including smooth, finishing and application of cement slurry before flooring works using cement @ 1.75 kg./Sqm all complete including all material and labours as per specification and direction of E.I.C. at any level

Step Tile for Stairs Supply and installation of 10-12 mm thick anti skid vitrified step tiles as per drawing and direction of EIC. ( Make: Kajaria/Nitco/ Somany/ Johnson )

Sports Floor for GYM area Providing and fixing 10mm thk tile type rubber base sports floor for GYM area with necessary consumable and adhesive.

Kota Providing and laying Kota stone slab of approved quality and thickness not less than 18 mm for floors over cement mortar bed 20 mm thick in prop 1 : 4 (1 cement : 4 coarse sand) including cutting where necessary finished with flush pointing white cement slurry mixed with approved pigment to match the shade of kota stone complete at all levels.

Kota Polish Kota Polish work as per requirement in different areas

Wooden Flooring Supplying, fitting and fixing of specified solid wooden flooring with factory finished wooden slats 125 mm to 150 mm wide, 15 mm to 18 mm thick with tongue and groove joint of approved brand with necessary 2mm thick foam all complete as per drawing and direction of E.I.C. ( Base rate of wooden floor is Rs. 500/sft ) Rate is inclusive of necessary foam and upto 100mm height skirting , end profile and tee of same shade

Glass Mosaic tile Providing and cladding of Glass Mosaic tiles of approved patern on wall with 1st quality of approved make & size 300mm X 300mm set in tiles mesh base material. Tiles are to be fixed with cement base approved adhesive.

Partition/Panelling

Providing and fixing of 144.0mm thick Gypwall Habito partition consist of GypSerra™ (“Patented in India (325062)”) Metal framework partition having maximum reachable height of 5700mm satisfying L/240 criterion at 200Pa, possessing fire rating of 60mins, tested in accordance to BS-476 Part 20 & 22 & sound insulation (Rw) of 54dB, tested in accordance to ISO 10140-2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-value of 0.30W/m²K & Severe duty rating as per BS 5234 part 2. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. Partition includes inner layer of 12.5mm thick Gypboard®Plain ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N & transverse > 180N} & outer layer of 12.5mm thick Gyproc®Habito conforming to IS 2095 Part 1:2011 / EN 520: 2004 - Type A,D,R,I, having flexural strength – {Longitudinal > 1010N & transverse > 550N} on either side of the framing. GypSerra™ Metal frame work, designed in compliance with BS EN 14195 & manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa & tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/ AS 1397 & tested for 500hrs of salt spray test as per ASTM B117, includes 92x34x36x0.5mm GypSerra™ C-Stud with lip of 6.5mm and H-cutout on web enabling the services to pass, having moment of inertia 115488mm4 about major axis, positioned at 610mm c/c in 94x32x32x0.5mm GypSerra™ Floor Channel & 94x32x32x0.5mm GypSerra™ Ceiling Channel with flanges bend at 5° acute angle. Floor & Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in zig zag manner. 92x40x40x0.5mm GypSerra™ Noggin Channel to be placed between the studs, behind the horizontal board joint. Gypboard®Plain Board strip is placed between Ceiling Channel and soffit when fire rating is more than 30mins. Inner & Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw & Gyproc®Habito Screw of 25mm with 12nos per m2 & 35mm with 24nos per m2 at spacing of 600mm & 300mm respectively. 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges & joints to be finished with Gyproc® Pro-Fill JC conforming to ASTM C475 &Gyproc®Paper tape. Periphery & cut-outs of the partition to be treated with suitable Fire & Acoustic Sealant.

Providing and fixing of 144.0mm thick partition consisting of the dry side made of GypSerra™ (“Patented in India (325062)”) Metal framework partition having maximum reachable height of 5700mm satisfying L/240 criterion at 200Pa, possessing fire rating of 60mins, tested in accordance to BS-476 Part 20 & 22 & sound insulation (Rw) of 54dB, tested in accordance to ISO 10140-2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-value of 0.30W/m²K & Severe duty rating as per BS 5234 part 2. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. Partition includes inner layer of 12.5mm thick Gypboard®Plain ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N & transverse > 180N} & outer layer of 12.5mm thick Gyproc®Habito conforming to IS 2095 Part 1:2011 / EN 520: 2004 - Type A,D,R,I, having flexural strength – {Longitudinal > 1010N & transverse > 550N} on either side of the framing. On the wet side, Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. Partition includes inner layer of 12.5mm thick Gypboard®Plain ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N & transverse > 180N} & outer layer of 12.5mm thick mold resistant Gyproc®GlasrocH with Glass mat reinforcement & inorganic coating on surface, conforming to EN 15283-1 Type GM - FH1, having flexural strength – {Longitudinal > 540N & transverse > 210N} on either side of the framing. GypSerra™ Metal frame work, designed in compliance with BS EN 14195 & manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa & tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/ AS 1397 & tested for 500hrs of salt spray test as per ASTM B117, includes 92x34x36x0.5mm GypSerra™ C-Stud with lip of 6.5mm and H-cutout on web enabling the services to pass, having moment of inertia 115488mm4 about major axis, positioned at 610mm c/c in 94x32x32x0.5mm GypSerra™ Floor Channel & 94x32x32x0.5mm GypSerra™ Ceiling Channel with flanges bend at 5° acute angle. Floor & Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in zig zag manner. 92x40x40x0.5mm GypSerra™ Noggin Channel to be placed between the studs, behind the horizontal board joint. Gypboard®Plain Board strip is placed between Ceiling Channel and soffit when fire rating is more than 30mins. Inner & Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw & Gyproc®Habito Screw of 25mm with 12nos per m2 & 35mm with 24nos per m2 at spacing of 600mm & 300mm respectively. 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges & joints to be finished with Gyproc® Pro-Fill JC conforming to ASTM C475 &Gyproc®Paper tape. Periphery & cut-outs of the partition to be treated with suitable Fire & Acoustic Sealant. All the performance test are carried out at NABL accredited/ government approved lab.

Providing and fixing of 144.0mm thick Gypwall Classic partition consist of GypSerra™ (“Patented in India (325062)”) Metal framework partition having maximum reachable height of 5700mm satisfying L/240 criterion at 200Pa, possessing fire rating of 60mins, tested in accordance to BS-476 Part 20 & 22 & sound insulation (Rw) of 50dB, tested in accordance to ISO 10140-2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-value of 0.29W/m²K & Severe duty rating as per BS 5234 part 2. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. Partition includes double layer of 12.5mm thick Gypboard®Plain ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N & transverse > 180N} on either side of the framing. GypSerra™ Metal frame work, designed in compliance with BS EN 14195 & manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa & tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397 & tested for 500hrs of salt spray test as per ASTM B117, includes 92x34x36x0.5mm GypSerra™ C-Stud with lip of 6.5mm and H-cutout on web enabling the services to pass, having moment of inertia 115488mm4 about major axis, positioned at 610mm c/c in 94x32x32x0.5mm GypSerra™ Floor Channel & 94x32x32x0.5mm GypSerra™ Ceiling Channel with flanges bend at 5° acute angle. Floor & Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in zig zag manner. 92x40x40x0.5mm GypSerra™ Noggin Channel to be placed between the studs, behind the horizontal board joint. Gypboard®Plain Board strip is placed between Ceiling Channel and soffit when fire rating is more than 30mins. Inner & Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw of 25mm with 12nos per m2 & 35mm with 24nos per m2 at spacing of 600mm & 300mm respectively. 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges & joints to be finished with Gyproc® Pro-Fill JC conforming to ASTM C475 & Gyproc®Paper tape. Periphery & cut-outs of the partition to be treated with suitable Fire & Acoustic Sealant. All the performance test are carried out at NABL accredited/ government approved lab.

Providing, Supply and Fixing of AS PER MAKE LIST 2 hours fire rated fully insulated fire resistant partition consist of 2nos, 20mm PROMATECT®-50 mineral bound magnesia board, with Steel Studs 70mm deep x 0.5mm thick and Ceiling and Floor perimeter steel channel 70mm deepx0.5mm deep. Each 20mm PROMATECT®-50 board will be placed on one side of the framing. The vertical stud will be placed at 610mm centre to centre. The board will be fixed to the vertical stud with M4 self tapping screws at 200mm centers. The perimeter channel will be fixed to the associated construction using M6 steel anchor bolt at 500mm centers. The butt joints of the boards shall have screws in alternate positions every 200mm. considering the board width the spacing shall be done at 610mm. Promat Board shall have a nominal Density of 1200 kg/m3, and shall be Resistant to vermin, mould growth, minor impact, abrasion and short term water attack. The board shall be Off-white in color with a smooth surface suitable to receive most forms of decoration.cost to include fire rated paint.

Parition framework Supply and installation of framework made out of Gypserra steel 50 mm & 48 mm wide GI section in line level and plumb ready to receive skin at locations indicated on the drawings or as instructed by the architect, all complete. (Cost to be for providing and fixing framework only)

Parition skinning with double Gypsum Board Supply and installation of 12.5 mm thk finished Gypsum board skin in 2 layers with 6/12mm grooves complete with angle beadings & paper tape as/manuf. Gypsum to be jointed and finished with requisite filler, paper tape, neatly finished. All components to be as per list of approved makes.

Parition skinning with single layer Gypsum Board Supply and installation of 12.5 mm thk finished Gypsum board skin in single layer complete with angle beadings & paper tape as/manuf. Gypsum to be jointed and finished with requisite filler, paper tape, neatly finished. All components to be as per list of approved makes.

Parition skinning with 12 mm thk plyboard Sypply and installation of Skining 12 mm thk. Raw ply Board over frame work w/dry wall screws at 230mm c/c. This would be up to50mm above False ceiling level from FFL.This would be fixed straight without any specifc pattern and hence achieve maximum yield.

Exterior grade 4mm MDF Sypply and installation of Skining 6 mm thk. MDF Board over frame work w/dry wall screws at 230mm c/c. This would be up to50mm above False ceiling level from FFL.This would be fixed straight without any specifc pattern and hence achieve maximum yield.

Partition/Panelling frame work with Aluminium sections Providing and fixing framework made in 50mm x 25mm thick aluminum (box section) (2mm thik) sections, placed at 600mm c/c in both the directions as per detail drawing

Wall Finishes

Acrylic Putty Providing and applying White acrylic base on wall and ceiling surface as per direction of EIC ( Make : Asian Paints/Berger/ ICI )

Cement Putty Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) Make : Birla/JK/ Asian

Acrylic Primer Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) ii) 2 coat ( Make : Asian Paints/Berger/ ICI )

i) Water based interior grade Acrylic Primer

ii) Solvent based interior grade Acrylic Primer

Oil Primer Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc ( Make : Asian Paints/Berger/ ICI )

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. ( Make : Asian Paints/Berger/ ICI )

Acrylic paint Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coat) ( Make : Asian Paints/Berger/ ICI )

a) Normal Acrylic Emulsion

b) Premium 100% Acrylic Emulsion

c) Super Protective 100% Acrylic Emulsion.

Enamel Paint SYNTHETIC ENAMEL PAINT

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

(a) On timber or plastered surface :

With super gloss (hi-gloss) -

(i) Two coats (with any shade except white)

(ii) Two coats (white in shade)

(iii) Two coats (with any shade except white)

With other than hi-gloss of approved quality-

(iv) Two coats (with any shade except white)

Duco Paint Providing and applying Duco paint with appropiate base work as per drawing and approval of EIC.

French Polish French polishing to wood work including preparing surface (ordinary gloss) (a) On new wood work

(b) On old French polished surface including complete removal of the old polish.

Wallpaper Providing & fixing wall paper as approved by archietect. Surface preparation -Providing and applying 2 coats of putty + 1 coat oil based primer on walls with appropriate preparation ( surface preparation will be paid extra )

Basic price Rs.100/- per Sq.ft

Basic price Rs.300/- per Sq.ft

Brick Tile Providing and fixing of Glass reinforcement Concrete tile of 15 mm thick, 60mm X 200 mm on exterior wall of approved make in all colours, shades as approved by Engineer-in-Charge over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Fabric Finishing on Primary Surface of panelling with Fabric ( opera )on base material including all necessary consumable and tools. Base rate of Fabric is Rs. 450/Rmt

Laminate Providing and fixing laminate of approved shade on appropiate base with adhesive as per drawing and approval of EIC Base Rate of Laminate is Rs. 80/sft ( Make : Green/Century or equivalent )

4mm Veneer Providing and fixing veneer of approved shade on appropiate base with adhesive as per drawing and approval of EIC Base Rate of Laminate is Rs. 120/sft( Make : Green/Century or equivalent )

Mirror Providing and fixing 5-6 mm thk mirror of approved make on appropiate base with adhesive as per drawing and approval of EIC Base Rate of Laminate is Rs. 120/sft ( make : Saint Gobain or equivalent )

Film Supplying, fitting & fixing opaque (frosted) film minimum 35micron fixed on glass of complete as per drawing and direction of E.I.C.M/S 3M and similar equivalent.

Graphics Supply & Installation of graphics of approved artwork digitally reproduced with water-based inks certified to have no hazardous air pollutants. Self-adhesive, bubble-free installation to be done on a smooth, dust free putty surface that has a coat of oil-based primer. Work to be done by Specialist agency. Base rate 280 Rs/ sqf excluding taxes.

Vitrified Tile Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (A) Deep Colour & White

Cobblestone flooring Supplying and laying of 30 mm thk cobblestone of required sizes in floor fixed with adhesive on laid down concrete backing maintaining a gap of 5mm. The gaps need to be filled with cementinuous material matching the pigment to maintain the reuired shade with the cobblestone.

Gypsum Plaster Providing and applying 10-15mm thk Gypsum plaser with making suitable base preparation as per direction of EIC .

Frosted Glass fixing with Patch Supplying and fixing 6 mm thick toughened frosted glass panelling works fixed on the primary surface with appropriate SS patch studs fittings complete all as shown on drawing and as directed by E.I.C. / Architect

Textured Paint Wall Providing and applying texture paint on wall surface as per direction of EIC. Then the surface shall be finished with approved range & make texture paint as per the manufacturers catalogue and specifications. The shade of the paint shall be approved by the Architects. ( Make : Asian Paint/Berger/Oikos or Equivalent )

Oil Based Paint Protective and Decorative oil based exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) ( Make : Asian Paints/Berger/ ICI )

Textured Paint Ceiling Providing and applying texture paint on ceiling surface as per direction of EIC. Then the surface shall be finished with approved range & make texture paint as per the manufacturers catalogue and specifications. The shade of the paint shall be approved by the Architects. ( Make : Asian Paint/Berger/Oikos or Equivalent )

Accoustic Ceiling Supply and installation of accoustic ceiling for reducing and controlling revertible noise with a NRC of 0.85 mm as per drawing and direction of EIC. ( Make : Armstrong/ HD/ Anutone etc. )

Leather Supplying fitting & fixing 0.79mm.-1.19mm fixed on wall primary surface with necessary adhesive surface materials of the product original leather with real seam, Varnishing all complete as per manufacture specification & drawing and direction of E.I.C. ( Base rate of leather is Rs. 700/ Smt )

Aluminium Louver Supply & installation of Aluminium Powder Coated (exterior grade) Louver system using Aluminium Tube of 50 x 44 mm -2mm thick (Alloy Grade 6063) as per design. Sections are to be powder coated microns _ as per approved color/finish.

ACP Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)

Providing and Fixing 12mm Thk Solid Acrylic Surface chosen color sheets fixed proper base material or frame work as specified by Architect with the help of Silicon and filling all the joints to provide aseamless finish. Rate is inclusive of cutouts. Base rate of Corian is 850 Rs/ SFT . Make :LG Hi Mac, Dupont or equivalent

Metal Work

MS work Structural work M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.

Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.

I) For structural members of specified sections weighing less than 22.5 Kg./m

II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m

III) For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m

Structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For roof truss work in galleries

MS grill work (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

(ii) Grill weighing above 16 Kg./sq.mtr and above

MS Handrail with GI finish Supplying and fixing of Handrail of 1100mm Height GI Handrail, 50mm dia GI Handrail welded with 12dia bracket. The handrail including 50x50mm GI Baluster at horizontal bracesss beign spaced as per the design, on RCC floor/beams/slabs ec including drilling holes, fixing with anchor fasteners. The hand railing and other horizontal members shall be bent on the correct radius profiles, shapes as required by the Engineer Incharge, using the apppropriate means without losing the profile of the pipe welding, grinding, drilling, tapping, handling, hoisting, aligning, temporary connections and all complete as shown in the detailed drawings.

MS Grill Repair work Necessary repair work of MS Grill with appropiate consumables .

GI Sheet Supplying and fixing GI sheet of thickness not less then 0.45 mm on MS structure with necessary consumables and hole packing with bitumin

2mm Sheet below Lintel Supplying and fixing 2mm thk MS sheet below the RCC/PCC/ Brickwork.

SS Handrail Supply and fixing of Stainless steel handrailing of 1100mm height grade of 304, No.4 Brush Finish to withstand a crush load of 1.5 KN per meter run, 50 x 50mm Hollow Top Rail and 50 x 50mm with solid Hollow Baluster beign spaced at 1.2m c/c and handrail of size 50mm Dia Hollow Hand rail with 50 mm dia stainless steel guard rail at horizontal bracess beign spaced as per the design, on RCC floor/beams/slabs ec including drilling holes, fixing with anchor fasteners. The hand railing and other horizontal members shall be bent on the correct radius profiles, shapes as required by the Engineer Incharge, using the apppropriate means without losing the profile of the pipe welding, grinding, drilling, tapping, handling, hoisting, aligning, temporary connections and all complete as shown in the layout & detailed drawings.

MS Door Providing and fixing metal door with necessary hinge , support and locking arrangements as per approved drawing.

Glazing Work

Curtain Wall with 13.52mm thk toughened laminated sandwich glass Supply and Fixing Glazed Curtain Wall made with aluminium box section as per design. The curtain wall is having 13.52 sandwich glass , aluminium sections of alloy 6063 T6 and tolerances confirming to INDIAN standard, all necessary anchor bolts (stainless steel), GI brackets designed to withstand 1.5Kpa confirming to IS-875 part-iii and also to accomodate three dimensional movements with approved chemical grout, with necessary 1.2mm thick aluminium trims and flashings to seal the gaps between curtain wall and the building structure, EPDM gaskets, weather sealants including any supprot required from structural framing from the top/ bottom of curtain wall to roof/ floor or any other intermediate supports to strengthen the assembly, no structural element used to strengthen the assembly shall be visible and to consider all visible surfaces shall be 60 micron powdercoated to maintain uniform approved finish.

Curtain Wall with 12mm thk toughened clear toughened glass Supply and Fixing Glazed Curtain Wall made with aluminium box section as per design. The curtain wall is having 12 mm clear glass, aluminium sections of alloy 6063 T6 and tolerances confirming to INDIAN standard, all necessary anchor bolts (stainless steel), GI brackets designed to withstand 1.5Kpa confirming to IS-875 part-iii and also to accomodate three dimensional movements with approved chemical grout, with necessary 1.2mm thick aluminium trims and flashings to seal the gaps between curtain wall and the building structure, EPDM gaskets, weather sealants including any supprot required from structural framing from the top/ bottom of curtain wall to roof/ floor or any other intermediate supports to strengthen the assembly, no structural element used to strengthen the assembly shall be visible and to consider all visible surfaces shall be 60 micron powdercoated to maintain uniform approved finish.

Canopy glazing Supply & Installation of Glass Canopy with other necessary accessories and consumables (i.e. Silicon, construction sealant, Screws, Backer Rod, Spacer Tape, Bimettallic seperator etc). to complete the job in all respect as per design.Measurement shall be as per the actual physical covered area quantity.(Excluding MS Structure & Fastner if required)

Top hung Providing and fixing aluminium glazed Euro Series partly fixed partly open able / open able windows duly powder coated in regular RAL colors using 24 mm thick DGU clear toughened glass (6+12+6) as specified using high strength to weight aluminium section of grade 63400 WP confirming IS:733 and IS:1285 complete including necessary hardwares such as Black colour Single Point handle, friction stay etc. The fabrication shall be done with all joints, mitred,the outer frame, mullions and shutters frame jointed with heavy duly aluminium joineries. Appropriate profiles of EPDM gaskets shall be inserted between aluminium frames / beadings and glass both inside and outside to make the glazing tight.

Doors , windows & door hardwares

Room Main door Fabricating, supplying and errecting 40mm thick wooden panelled door shutter fixed to teakwood frame as per drawing. The stiles shall be 150x40 mm and top bottom and intermediate rails shall be 150x40mm tenon jointed as per ISS, panel portion will be partly louvered made on 6mm thick BWR plywood with both sides pasted with thin wooden louvers complete with duco paint coating, all as specified and shown on drawings and as directred by Engineer incharge/ Architect including fixing door fittings.

Other area doors Fabricating, supplyign and erecting 40mm thick solid core flush doors shutters coforming to IS 2201(part I) BWR grade with internal lipping over the door surface. Complete door assembly to be mounted on approved but hinge to make the door swing complete with necessary locking arrangement all as shown on drawing and as directed by Architect / Engineer in charge. (Door fittings measured seperately.)

Extra for wooden slat finish and Z batten on each surface of the door Supplying and fixing Z- type wooden batten ( Wallnut or similar type) over same finished laminate pasted on 4mm mdf with a groove of 10mm to provide a feel of original wood

Toilet Door- Flushdoor with Laminate and Duco paint Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf)

Aluminium Window with DGU thk glass Providing and fixing aluminium glazed partly fixed partly openable / openable windows duly powder coated in regular RAL colors using 24 mm thick DGU clear toughened glass (6+12+6) as specified using high strength to weight aluminium section confirming IS:733 and IS:1285 complete including necessary hardwares such as Single Point handle,friction stay etc. The fabrication shall be done with all joints, mitred,the outer frame,mullions and shutters frame jointed with heavy duly aluminium joineries. Appropriate profiles of EPDM gaskets shall be inserted between aluminium frames / beadings and glass both inside and outside to make the glazing tight.

Glass door with 12mm thk glass and aluminium framing Providing and fixing of 12mm Thk glass door door with powder coated aluminium frame. Rate is inclusive of Lock and 150 mm Handle.

Duco painted wooden window with louver design Fabricating, supplying and errecting 40mm thick teak wood panelled door shutter fixed to teakwood frame as per drawing. The stiles shall be 150x40 mm and top bottom and intermediate rails shall be 150x40mm tenon jointed as per ISS, panel portion with french polish and melamine coating, all as specified and shown on drawings and as directred by Engineer incharge/ Architect including fixing door fittings. (Door fittings are to be measured seperately.)

Providing and fixing mortice lock chromium plated with 6 levers and a pair of lever handel of approved quality with necessary screws etc. complete. ( Make : Godrej or equivalent )

Supplying fitting and fixing door viewer Hafler or similar all comlete as per manufacture specification and direction of E.I.C ( Make : Godrej or equivalent )

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI : 3564/EN Rated, embossed on the body, door weight upto 36 Kg to 80 Kg and door width from 701 mm to 1000 mm) with double soeed adjustment with necessary accessary screws etc. complete. ( Make : Godrej or equivalent )

Providing and fixing door handles 150 mm long with screws etc. complete. ( Make : Godrej or equivalent )

Providing and fixing hanging type floor door stopper with (Medium duty) necessary screws etc. complete. ( Make : Godrej or equivalent )

Providing and fixing 200mm long tower bolts with necessary screws etc. complete. ( Make : Godrej or equivalent )

Providing and fixing bright finished brass 100 x 75 x 3 mm ( ordinary type ) butt hinges with necessary screws etc. complete. ( Make : Godrej or equivalent )

Providing and fixing 125 x 75 x 3 mm ( ordinary type ) butt hinges with necessary screws etc. complete. ( Make : Godrej or equivalent )

Providing and fixing 250 mm long x 16 mm dia bolt.aldrop or sliding bolts of approved quality with necessary screws etc. complete. ( Make : Godrej or equivalent )

Wooden work

Door Frame malaysian Salwood Malaysian Salwood work in door frame fitted and fixed complete including a proective coat of painting at any floor.

Teakwood Bead Supply and installation of Teakwood Bead of different size. ( Rate is exclusive of surface finish )

Jamb panelling with wooden frame, 12 mm ply as base for primary finish Designing, supplying, fabricating and erecting of necessary panelling works in the jamb and sill of door and window, made of approved hardwood, size of botten is 50mm X 25mm sections, both horizental and vertical fixed with rawal plage on the walls, or any space that needs panelling work in level and plumb with edge finishes as per drawing and direction of E.I.C. Primary Surface- 12mm thick BWR commercial ply on one side.

Jamb panelling with wooden frame, 12 mm ply and MDF for paint finish Designing, supplying, fabricating and erecting of necessary panelling works in the jamb and sill of door and window, made of approved hardwood, size of botten is 50mm X 25mm sections, both horizental and vertical fixed with rawal plage on the walls, or any space that needs panelling work in level and plumb with edge finishes as per drawing and direction of E.I.C. Primary Surface- 12mm thick BWR commercial ply on one side and 4mm thick MDF

Louver Design Supplying, fabricating and fixing of wooden louver made of 40 mm x 6 mm wood fillets fixing the same with wood frame of section as shown on drawing. Total assembly portion errected in proper prosition with SS screws and rawal plig. All complete as per drawing and direction of Architect/E.I.C including Duco Paint

Miscellaneous work

Rug Supplying and placing in proper position of custom made best quality throw in woolen carpet / Rugs heavy pile exminister wearing woolen carpet approved colour & design all complete as per direction of Architect and Engineer-in-charge.

Door mat Supplying and placing in proper position of approved door mat. Base price of the Mat is Rs. 1500/ Pcs

Dustbin Supplying and placing in proper position of metallic waste paper box (Swing Dustbin) all complete as per direction of Architect and Engineer-in-charge.

Blinds Supplying and fixing approved quality roman blinds (Tweed fabric) made of upto 0.8 mm thick paper and polyster fabric (LUNAR -3176 or similar equivalent)Wt. upto 325 gm/Sqm all complete as per drawing and direction of Engineer-in-charge. Approved manufacturer M/s. Mac / Hunter Doglas or similar equivalent. Base rate of Blinds is Rs. 300/sft

Curtain Supply and installation of curtain with frame as approved and direction of EIC with all necessary supports. Base rate of Curtain is Rs.400/sft

Old terracotta tali refixing on roof Refxing of old available terracotta tiles.

New terracotta tali fixing on roof Supply and installation of terracottac tiles as per direction of EIC. Base rate of Terracotta tile is Rs. 150/sft

Pathway Shedding with MS Structural support and necessary Foundation work Supply and installation of pathway shedding with PVC material on MS structure as per approved drawing. The shedding material has to be waterpoof and transluscent.

Modular Metal False Ceiling for BOH areas Supplying errecting and fixing of perforated metal ceiling with fixed with steel suspenders with appropriate levelling arrangement as per manufacturer's specifications (M/S Armstrong or other similar equivalent) all as shown on drawing and as directed by E.I.C. / Architect.

Landscaping Work

Supply and installation of approved Draincell

Supply and installation of approved Geo - Textile Mat

Supply and installation of approved White pebbles

Supply and installation of approvedGood Earth

Supply and installation of approved Carpet Blade grass

Supply and Installation of artwork with anti reflected art glass Frame Size: 1320x480mm (Approx . OD size

Signage Providing and fixing Signage with vinyl cut letters on blue acrylic sheet or black vinyl cut letters on brush steel plates are the most preferred finishes.. Size 450x 100mm

Providing and fixing INDIVIDUAL DIRECTIONAL BOARD SIGNAGE (SS) / Site-specific Signage:- SPECIFICATION : Size : 600mm x 180mm, finishing-vinyl cut letters on brush steel of thickness 1.5 mm

Providing and fixing 80mm x 80mm etched graphics on brush steel plates.

Providing and fixing 200x200mm plate of 8mm thk clored glass/acrylic wit edges bevelled and polished and fixed with 6mm ss studson the surface/door. Text specification-white acrylic cut letters of proportionate sizes and stuck with hard glue on the glass.Font-as per guidelines.pictograms shall be stuckbesides the letters as per architect/clients choice

Supply and application of pest control materials to protect the ground and existing civil surfaces from termite attack as per direction of EIC

Supply and installation of 50mm thick rockwool 48Kg/m3 density for ceiling, paneling, partition etc. using suitable SR adhesive. All complete as per direction of E.I.C.

Supplying and placing in proper position of duco painted 600x450x450 mm metallic planter all complete as per direction of Architect and Engineer-in-charge.

Supplying, lifting, cutting and laying / fixing of 20 mm thick 600 mm wide pre-polished Granite Slab for kitchen/ pantry counter over one set of horizontal 25 mm thick black Stone or Metal Frame. Black stone and granite stone min 25 mm deep inserted to wall, jamming by cement mortar & fixing by araldite on the top edge of the black stone, finished to all shapes (curved or straight), making Hole for traps, pipes, electric box, cutting openings for Kitchen sink, Cladding, copla, V groove cutting (with moulding) & polishing and filling the proper joints with matching colour pigment, curing etc as per drawings, specifications and direction of the EIC. ( Base Rate of Granite is Rs. 300/ SFT and Black stone is Rs. 45/SFT)

Supply installation testing and commissioning for RO Water supply arrangement. Input : Total Dissolved Solids: < 1000 PPM & Output : Total Dissolved Solids: < 30 PPM Capacity 1000 LPH RO

SPA, Gym and Saloon

Supply, installation, testing and commissioning of Sauna Timer

Supply, installation, testing and commissioning of 18KW Steam Generator for SPA

Supply, installation, testing and commissioning of 15 KW Generator for Sauna Room

Supply, installation, testing and commissioning of Tempatarature and Hydro Meter for SPA

Supply, installation, testing and commissioning of Ceadr wood Flooring planks SPA

Supply and Installation of PVC Shampoo Bed

Supply and Installation of Porcelain Pedicure Basin

Supply and Installation of Salon Trolley

Massage Bed

Supply and Installation of Commercial Treadmill Viva Fitness USA T2500i or equivalent with TV and Android based Operating System *15.5” TFT touch screen. *Android based operating system. *AC driving system provides higher torque of power for heavy loading. *4.0 HP AC continuous (8.0 HP Peak) motor. *23″ x 62″ running surface. *Speed 0.8~20 kmph. *Precise incline control from -3~15%. *Unique -3% declinable deck. *Various motivating programs for different workout requirements. *Double phenolic heavy cushioned deck for excellent shock absorption that provides suitable push off to reduce the possibility of any type of injury to knees and joints. *Heavy duty 3.1mm reliable orthopaedic running belt. *Machine automatically reminds for lubrication. *Connectivity with speakers. *Sweat proof console design. *Two cup / bottle holders. *Maximum User Weight : 180 Kgs.

Supply and installation of Cross Commercial Cross Trainer Viva Fitness U.S.A KH-2075 DRIVE or equivalent *Front-drive and handle arms enable sustain, smooth & engaging exercise, regardless your fitness level *Large & impact-absorbing pedals provide gentle movement to reduce lower back stress *Self-powered system, low maintenance design & space-saving deliver a fast return of investment *Striding distance : 500 mm (20") *Power : Generator *Resistance level : 40 MONITOR *Heart rate control programs provide user a challenging training *Multi readout summarizes workout result every minute, displays time used, distance covered, burned calories, watt and mets achieved. *Reliable sweat-proof construction keeps console in demanding commercial environment SPECIAL FEATURES *Offers 4 programs and upto 40 resistance levels to keep fitness routine effective and fresh *Large LED’s and intuitive keystroke permit easy to operate interface for change and monitor *Quick start key allows commencing exercise with a touch of a button *Display function is switchable for feedback of Level, Watt, Mets and Pulse *Maximum User Weight : 150 Kgs

Supply and Installation of Commercial Upright Bike Viva Fitness U.S.A KH-1120 or equivalent Dot matrix LED display showing Pulse, Recovery, Time, RPM, *Speed, Distance, Calories, Watt, Heart Rate and Resistance. *With self generator system. *12 programs : 4 HRC, 3 goal, 1 recovery and 4 user. *Magnetic brake with V-belt drive system. *16 levels tension control system. *With heart rate receiver. *Hand grips with pulse sensors. *Counter balance pedals. *With bottle holder. *PU seat with adjustable height. *Transport wheels. *User weight : 150 kg.

Supply and Installation of INternational Water Rower E 520 or equivalent Full commercial machine designed for heavy duty service. 20 Level Patented Variable Fluid Resistance Absolute Comfort, Stability & Performance with Widest Range of Resistance Available. Height Adjustable footplates with Advanced Heel Cradle footboard design (Reg. Design) and straps to ensure optimal foot placement and comfortable rowing position. Compact side mounted tank design delivers ease of adjustment. Interactive Performance Monitor (IPM) with USB port: The IPM displays: time; speed; distance; stoke rate; calories per hour; watts; 20 level adjustment, pacer, and has a heart rate receiver built in. The IPM gives you quick start, manual programs, interval training, USB port allows interactive programming. Fitted with Heart Rate sensor as standard compatible with all main HR belts. 6 previous workout memories and a unique pacer system. Unmatched Durability - Virtually Maintenance Free. Strikingly attractive blue polycarbonate tank with contrasting seal. Deluxe ergonomic handle allows comfortable grip and minimised strain on forearms, wrists and hands. Low noise Belt Drive - No Chains to lubricate. Concealed Air-Glide Seat Rollers for safer and cleaner continuous smooth operation. Rubber dipped retainer for damage free handle stowage when not in use. "Easy roll" transport wheels. Unique rugged heel support assembly. Maximum user weight 204kg (450lbs). Dimensions: 190 x 71 cm (75 x 28") in use. Stands for compact storage.

Supply and Installation of QUADRA COMMERCIAL MULTI GYM Viva Fitness USA 518BK or equivalent 4 station gym with 4 weight stacks of 96 Kgs each Multiple Exercise Function – Leg press, Leg extension, Leg curl, Chest press, Lat pull, Hi-Low pully, Rowing and Bicep curl etc. Durable powder coated finish Ergonomic Design / Scientific Biomechanics Arc cover for protection

Supply and Installation of Dumbell Rack Viva Fitness IT 7018 Viva Fitness USA or equivalent 158cm (L) x 81.4cm (W) x 198cm (H) For Commercial Use

Supply and Installation of Commercial Smith Machine IT 7001 VIVA FITNESS USA or equivalent Elegant designed with smooth rounded corners for safe workout environment. Smooth action. Precise 7 degree angle Smith Machine is designed to provide a natural upper and lower body exercise movement. Include incredibly strong, adjustable safeties for both the Smith system and the free weight barbell workout centre. For Commercial Use

Supply and Installation Of Commercial Multi-Adjustable Bench IT 7011 VIVA FITNESS USA or equivalent Elegantly designed with smooth rounded corners for a safe workout environment. Superior quality pads, tear resistant PVC + Urethane upholstery. Highest grade Steeltubing & Epoxicoating with High Density PU foam & Leatherite Upholstry. High density, top grade foam provides safety, comfort and stability. Breakthrough technology has been applied to all adjustment settings of height. For Commercial Use

Supply and installation of Thermo Power Olympic Plates -[Tear proof, soundless & bouncy effect ] or equivalent * 3 hole easy grip design olympic plates and * Tear proof, sound less & bouncy effect Requiered sizes - 1.25X2,2.5X2,5X2,7.5X2,10X2,15X2,20X2,25X2 kgs Total of 173 Kgs

Supply and Installation of Thermo Power Dumbells [Tear proof, soundless & bouncy effect ]or equivalent Made of hard-wearing impact resistant rubberised material, It won't release odd smell, It provides a smooth non-tacky feel. Won't stain hands or cause any rubber deteriorated problems Sizes (in Kgs) 2.5x2,5x2,7.5x2,10x2,12.5x2,15x2,17.5x2, 20x2 Total of 180 Kgs

Supply and Installation of NBR Yoga Mat or equivalent Embossed Surface for excellent grip Hand Washable Size : 183 cm x 61 cm

Supplya and Installation of Olympic Wt Lifting Steel Rods Imported - 50 mm Viva Fitness USA or equivalent

Supply and Installation of Olympic Curl Bar Viva Fitness USA or equivalent

Supply and Installation of Olympic Spring Collar or equivalent

Providing and Placing of Self drying Cushion for external use

Supply and placing of Bucket and Laddle at SPA area

Providing and fixing 10 mm thick frosted toughened glass partition of SPA shower cubical incl all chrome finished patch fittings and necessary sliding channel etc all complete as per design and drawing

Supplying, fitting and fixing partition wall with 18mm compact laminate board (HPL) as per IS 2046 fixed with necessary S.S U,F & door stopper channel and top rail and necessary S.S. hook, lock, hinges and also necessary adjustable foot. Fixed height of 100mm from bottom for toilet W.C partition all complete as per manufactor specification and drawing and direction of E.I.C

Loose Furniture

Guest Room Furniture

Matress (King Size )

Matress (Queen Size )

Single Matress

Study Chair Supplying design B.Teak wood finished chair with all exposed solid B.Teak and legs arms, back with necessary exposed solid wood bracing front runner and cusion holder etc. complete with melamine polish finished. Seat & back; made of timber of secondary specis of approved make with appropriate latex rubber & foam with necessary upholstry materials, upholstry with approved fabric/ leatherite finished

Easy Chair Fabrication, supplying and placing in position easy chair with fabric seat fixed with wooden rolled ends entangled in slats on timber member at front and back as per details shown on drawing comprising broadly the following specifications. 1. Timber skeleton frame work with 1st class teak wood finally wrough on all faces. Recliming angle of the back of the chair is with slatted back rest stoented to hold the reclined back rest. 2. Fabric seat with fine fabric as shown on the drawing basic cost of fabric not less than Rs. 600/ rmt 3. Stiched and plated edges of fabric for reinforced edge. 4. Timber surface to be polished with P.U. polish.

Soffa Supplying sofa and settee as per design with inside frame work of teak wood and for seat, back leather finish . Cushion with medium grade foam. The exposed framework should be polishedas per detail design and as per direction of Architect / E.I.C. Featherlite and similar equivalent.

1 Seater Soffa

2 Seater Soffa

3 Seater Soffa

Study Table Supplying table for study table made with block board structure, one side 3 nos. drawer unit all exposed surface veneer finished. Modesty panel finished with approved veneer and saw marked timber slates as per design and direction of architect.

Bedside Table Fabricating, finishing and supplying bedside table of made of stout teakwood frame and 19mm thick BWR plywood table top and shelf (intermediate) duly topped with approved sewer finish, necessary edge moulding with teak wood fillets complete all as shown on drawing, finishing the surface with french polish with melamine coating all as directed by Engineer-in-charge. Size : 450x 450x 450mm

Soffa Side Table Supplying, fitting and fixing of table with good quality glass top supported by good quality wooden legs with PU finish complete in all respect . The Height of the table should be 450 mm(approx.). The table will be supplied as per design and as per direction of Architect / E.I.C SIZE - 450 X 600 X 450mm

Centre Table Type 1 Supplying, fitting and fixing of table with 1st class teak wooden top supported by 1st class teak wood legs as per design with PU finish complete in all respect.The Height of the table should be 450 mm(approx.).The table will be supplied as per design and as per direction of Architect / E.I.C Size : 600x 500 mm

Centre Table Type 2 Supplying, fitting and fixing of table with 1st class teak wooden top supported by 1st class teak wood legs as per design with PU finish complete in all respect.The Height of the table should be 450 mm(approx.).The table will be supplied as per design and as per direction of Architect / E.I.C Size : 900 x 600 mm

Luggage Rack Fabricating, finishing and supplying luggage racks made of seasoned teak wood frame work with 19mm thick BWR plywood topping duly pasted with approved veneers top and wall board with approved teakwood moulding and long drawer unit and locker unit as shown on drawing, the luggage table top shall be fitted with 8mm X 6mm stainless steel strips at 20mm intervals the wall panels will also be provided with SS strips complete as shown on drawing and finally finished with french polish and malamine coating. All fittings of drawer and locker shall be of brass.(500mm depth)

Wadrobe storage-cum-filing cabinet made of 18mm. thick commercial block board, ply wood as specified for top, bottom, sides, shelves and hinged shutter and 6mm. Commercial ply as specified, for rear, fixed to the low height partition with wood screw and phenol bonded glue with exposed edges of teak wood lipping/mounlding polished with french polish and melamine finish and all exposed surface finished with 4mm. Thick approved veneer and inside surface finished with french polished fitted with hinged,lock, etc. complete in all respect as per design and direction of interior designer.With teak veneer/white ceder finished.Depth of storage 600mm. (approx.). 900x2100

Minibar Fabricating, finishing and supplying of mini bar of Size 600 (L) X500(B) X 1000(H) or as shown on drawing with 19mm thick BWR plywood base duly topped with approved veneers, edge moulding with approved teak wood fillets and locker unit shutters to be with teak wood louvered door and providing a mini fridge of Samsung / LG / or equivalent with all electrical connections complete all as shown on drawing and as directed by Engineer-in-charge

TV Rack Fabricating, finishing and supplying TV rack of overall size 1500 X350 with 19mm thick BWR plywood base duly topped with approved veneer and edge moulding with approved teak wood fillets with necessary teak wood planks to form a small shelf with necessary edge guard and complete assembly fixed on wall over hard wood battens complete all as shown on drawing and as directed by Engineer-in-charge.

Ottoman Supplying bench with timber framework having platform for holding the cushion in position .Cushion will be of moulded foam medium density 100mm thick The frame work should be polished and finished as per direction of Architect / E.I.C

Locker unit Fabricating, finishing and supplying Safe deposit lockers of steel with outer and inner locks(Godrej or similar equivalent) for internal lockers and dual key system locks for outer steel cover as per Bank's models, size of individual personal lockers. Sheet metals should be hot dipped galvanised or metal anodised finish complete all as shown on drawing and as directed by Engineer-in-Charge

Head Board Supplying, fabricating and finishing of head board comprising of 19mm thick plywood base with approved veneer finish, lipping and edge moulding with teak wood fixed at site on suitable hard wood battons to make space for wiring etc. all finished and treated with 1st class french polish and melamine quoting complete all as shown on drawing and as directed by Engineer-in-charge.

Reception Furniture

Reception Table Supplying reception table made with 19mm thick BWR solid plywood and solid timber framing with Italian marble finished as per drawing and design with. Inside made up of laminate finished plywood framing and chipboard panel with P.U finished. The item includes necessary structural supports e.g leg etc.The item should be supplied as per detail design and as per direction of Architect.

Bill Desk Supplying table with necessary hard wood frame work and all complete.The table top is veneer finished writing space. all complete as per design and direction of E.I.C

Meeting Table Supplying table as per design with 4 support legs of solid timber veneer finished. Inside made up of MDF framing and chipboard panel with P.U finished. The item includes necessary structural supports e.g leg etc.The item should be supplied as per detail design and as per direction of Architect/ E.I.C

Meeting Chair Supplying high medium chair having metal pedestals with telescopic castors and arm rest. Seat and back specially moulded with latex rubber and upholstery with leatherite finish as per design and as per direction of Architect. Duly mounted on 50mm dia (5 nos.) swivelled roller wheels.

Locker unit Fabricating, finishing and supplying Safe deposit lockers of steel with outer and inner locks(Godrej or similar equivalent) for internal lockers and dual key system locks for outer steel cover as per Bank's models, size of individual personal lockers. Sheet metals should be hot dipped galvanised or metal anodised finish complete all as shown on drawing and as directed by Engineer-in-Charge

key holder

DFMD Supply, Installation, Testing and Commssioining of Door Frame Metal detector. - 8 Zone

Baggage Scanner Supply, Installation, Testing and Commssioining of X-Ray cargo Baggage Scanner

Security Desk Supplying Fitting and fixing in position cafeteria table made up of pouder coated metal legs with necessary side ties having a block board with laminate finished top as per design and as per direction of Architect / E.I.C

Security Chair Supplying, fitting and fixing of chairs medium backed with 'C' frames or four legged frame with arm base of the chairs are available in chromium planted or charcoal black matt powder quoted finish.

Lounge

Lounge Side Table Supplying, fitting and fixing of table with good quality glass top supported by good quality wooden legs with PU finish complete in all respect . The Height of the table should be 450 mm(approx.). The table will be supplied as per design and as per direction of Architect / E.I.C

Lounge Centre Table Supplying, fitting and fixing of table with 1st class teak wooden top supported by 1st class teak wood legs as per design with PU finish complete in all respect.The Height of the table should be 450 mm(approx.).The table will be supplied as per design and as per direction of Architect / E.I.C 600x 900 mm

Supplying, sofa and settee as per design with frame work of teak wood in combination with matt finish chromium plated stainless steel hollow sections. The seat finished with leatherite. All the exposed framework should be PU finished,.according to the design enclosed along with the tender and as per direction of Architect E.I.C

1 Seater Soffa

2 Seater Soffa

3 Seater Soffa

Supply & delivery of Wooden puff as approved by Architect

GM Office

Executive Table Supplying table Size:1500(L) X 750(B) X750(H) made with veneer finished BWR 19mm plywood with necessary frame work and one drawer unit and storage space at slides, metallic keyboard tray etc all complete as per design and direction of E.I.C

Executive Chair Supplying high back chair having metal pedestals with telescopic castors and arm rest. Seat and back specially moulded with latex rubber and upholstery with leather finish as per design and as per direction of Architect. Duly mounted on 50mm dia (5 nos.) swivelled roller wheels.

Visitor Chair & tilting high back chair with five prong pedestal chrome finish with castor. Arm with moulded with timber cladding on M.S. frame necessary foam rubber & upholsterd with leatherite, finish seat & back as per drawing. Duly mounted on 50mm dia (5 nos.) swivelled roller wheels.

2 Seater Soffa

Low Height Storage Providing, fitting and fixing of low height storage-cum-filing cabinet upto 850 (approx) mm. height made of 18mm. thick commercial block board, ply wood as specified for top, bottom, sides, shelves and hinged shutter and 6mm. Commercial ply as specified, for rear, fixed to the low height partition with wood screw and phenol bonded glue with exposed edges of teak wood lipping/mounlding polished with french polish and melamine finish and all exposed surface finished with 3 to 4mm. Thick approved veneer and inside surface finished with french polished fitted with hinged,lock, etc. complete in all respect as per design and direction of interior designer.With teak veneer/white ceder finished.Depth of storage 600mm. (approx.).

Centre Table 600 x900 x 450 mm with Glass Top

Side Table 600 x450 x 450 mm with Glass Top

Accounts Office

Workstation Providing, fitting and fixing work station(4 module) to low height partition, made of 18mm.block board and fitted to partition with timber beads,exposed surface finished 1.5mm. thick with synthetic laminate synthetic laminate with heavy moulding all edges covered with teak wood leaping complete in all respect as per design and direction of interior designer/ E.I.C.

Workstation Chair Supplying medium back work station chair having five prong stout metal pedestals with castors and arm rest. Seat specially moulded with latex rubber and upholstery with fabric finish and back portion latex rubber with febric finished as per design and as per direction of Architect. Duly mounted on 50mm dia. (5 nos.)

Almirah Providing, fitting and fixing of low height storage-cum-filing cabinet made of 18mm. thick commercial block board, ply wood as specified for top, bottom, sides, shelves and hinged shutter and 6mm. Commercial ply as specified, for rear, fixed to the low height partition with wood screw and phenol bonded glue with exposed edges of teak wood lipping/mounlding polished with french polish and melamine finish and all exposed surface finished with 4mm. Thick approved veneer and inside surface finished with french polished fitted with hinged,lock, etc. complete in all respect as per design and direction of interior designer.With teak veneer/white ceder finished.Depth of storage 600mm. (approx.). 900x2100

Providing and fixing MS powder coated slotted angle rack .( Make : Godrej or Equivalent )

Electrical Room Office

Table Supplying Fitting and fixing in positioning table made up of pouder coated metal legs with necessary side ties having a block board with laminate finished top as per design and as per direction of Architect / E.I.C

Chair Supplying, fitting and fixing of chairs medium backed with 'C' frames or four legged frame with arm base of the chairs are available in chromium planted or charcoal black matt powder quoted finish.

Bar Counter Providing and fixing Bar Counter 750 mm deep counter top to be of minimum 18mm Thk cosmos engineered stone with (1100mm )fascia made out of 18 mm Thk Italian Stone as per approved design, make and shade, counter modules to be fixed on 50X50X5 mm MS frame with 19 mm thick waterproof ply as substrate as per drawing including, primer, anti termite paint, adhesive, two or more coat of synthetic enamel paint (Minimum paint thickness shall be 100microns)of approved shade, / one layer of red-oxide paint of approved shade, diamond polishing ,makinhg holes/ cut for basin/sink, edge moulding/nosin, screws, nails, dash fastener, all necessary fixing arrangement etc complete with all leads and lifts as per specifications and drawings at all levels and as per the instructions of Engineer in Charge. Inside of the Counter to be lined with Laminate finish.

Bar's Tool

Restaurant

Restaurant Chair Type 1 Supplying banquet stack chair with under carrige legs made out of 19mm tubular steel finished in silver epoxy finished seat up made of moulded in tough polypopline with approved colour finished as per design.

Restaurant Chair Type 2 Supplying banquet stack chair made out of 19mm tubular steel finished in silver epoxy finished seat up made of moulded in tough polypopline with approved colour finished as per design.

Restaurant Table Type-1 Supplying Fitting and fixing in position speciality resturent table-Size:1800(L) X 900(B) X 750(H) made up of pouder coated metal legs with necessary side ties having a veneer finished 19mm BWR thick plywood top fixed on stainless steel spacers and edge finished with 100mm wide 12mm thick BWR plywood edging duly topped with approved veneer as per design and as per direction of Architect / E.I.C

Restaurant Table Type-2 Supplying Fitting and fixing in position speciality resturent -Size : 1500(L) X 900(B) X 750(H) made up of pouder coated metal legs with necessary side ties having a veneer finished 19mm BWR thick plywood top fixed on stainless steel spacers and edge finished with 100mm wide 12mm thick BWR plywood edging duly topped with approved veneer as per design and as per direction of Architect / E.I.C

Low Height Cabinet Providing, fitting and fixing of low height storage-cum-filing cabinet upto 850 (approx) mm. height made of 18mm. thick commercial block board, ply wood as specified for top, bottom, sides, shelves and hinged shutter and 6mm. Commercial ply as specified, for rear, fixed to the low height partition with wood screw and phenol bonded glue with exposed edges of teak wood lipping/mounlding polished with french polish and melamine finish and all exposed surface finished with 3 to 4mm. Thick approved veneer and inside surface finished with french polished fitted with hinged,lock, etc. complete in all respect as per design and direction of interior designer.With teak veneer/white ceder finished.Depth of storage 450mm. (approx.).

Banquet

Buffet Counter Table Providing and fixing Bar Counter 750 mm deep counter top to be of minimum 18mm Thk cosmos engineered stone with (1100mm )fascia made out of 18 mm Thk Italian Stone as per approved design, make and shade, counter modules to be fixed on 50X50X5 mm MS frame with 19 mm thick waterproof ply as substrate as per drawing including, primer, anti termite paint, adhesive, two or more coat of synthetic enamel paint (Minimum paint thickness shall be 100microns)of approved shade, / one layer of red-oxide paint of approved shade, diamond polishing ,makinhg holes/ cut for basin/sink, edge moulding/nosin, screws, nails, dash fastener, all necessary fixing arrangement etc complete with all leads and lifts as per specifications and drawings at all levels and as per the instructions of Engineer in Charge. Inside of the Counter to be lined with Laminate finish.

Banquet Table Type 1 Supplying Fitting and fixing in position speciality resturent -Size : 1800(L) X 900(B) X 750(H) made up of pouder coated metal legs with necessary side ties having a veneer finished 19mm BWR thick plywood top fixed on stainless steel spacers and edge finished with 100mm wide 12mm thick BWR plywood edging duly topped with approved veneer as per design and as per direction of Architect / E.I.C

Banquet Table Type 2 Supplying Fitting and fixing in position speciality all day dining table-Size:1500(L) X 900(B) X 750(H) made up of pouder coated metal legs with necessary side ties having a veneer finished 19mm BWR thick plywood top fixed on stainless steel spacers and edge finished with 100mm wide 12mm thick BWR plywood edging duly topped with approved veneer as per design and as per direction of Architect / E.I.C

Banquet Chair Supplying banquet stack chair made out of 19mm tubular steel finished in silver epoxy finished seat up made of moulded in tough polypopline with approved colour finished as per design.

Laundry & Linen

Manger Table Supplying Fitting and fixing in position cafeteria table made up of pouder coated metal legs with necessary side ties having a block board with laminate finished top as per design and as per direction of Architect / E.I.C

Chair Supplying design B.Teak wood finished chair with all exposed solid B.Teak and legs arms, back with necessary exposed solid wood bracing front runner and cusion holder etc. complete with melamine polish finished. Seat & back; made of timber of secondary specis of approved make with appropriate latex rubber & foam with necessary upholstry materials, upholstry with approved fabric/ leatherite finished

Staff Dormatory

Bunk Bed Fabricating, finishing and supplying Otoman of size 900mm X 400mm with stout teak wood frame with 12mm thick BWR plywood top and 100mm thick medium density foam mattress and covered with approved fabric, finishing and polishing with french polish with melamine coating complete all as shown on drawing and all as directed by E.I.C

Providing and placing MS powder coated Personal Locker Unit. ( Make : Godrej or Equivalent )

Providing and placing 4"- 6" thk matress as approved. ( Make : Godrej or equivalent )

Staff Canteen Table Supplying Fitting and fixing in position cafeteria table made up of pouder coated metal legs with necessary side ties having a block board with laminate finished top as per design and as per direction of Architect / E.I.C

Liquor Store

Rack Providing and fixing MS powder coated slotted angle rack .( Make : Godrej or Equivalent )

Manger Table Supplying Fitting and fixing in positioning table made up of pouder coated metal legs with necessary side ties having a block board with laminate finished top as per design and as per direction of Architect / E.I.C

Chair Supplying, fitting and fixing of chairs medium backed with 'C' frames or four legged frame with arm base of the chairs are available in chromium planted or charcoal black matt powder quoted finish.

Marketing Office

Supplying table Size:1500(L) X 750(B) X750(H) made with veneer finished BWR 19mm plywood with necessary frame work and one drawer unit and storage space at slides, metallic keyboard tray etc all complete as per design and direction of E.I.C

Supplying high back chair having metal pedestals with telescopic castors and arm rest. Seat and back specially moulded with latex rubber and upholstery with leather finish as per design and as per direction of Architect. Duly mounted on 50mm dia (5 nos.) swivelled roller wheels.

Supplying tilting high back chair with five prong pedestal chrome finish with castor. Arm with moulded with timber cladding on M.S. frame necessary foam rubber & upholsterd with leatherite, finish seat & back as per drawing. Duly mounted on 50mm dia (5 nos.) swivelled roller wheels.

2 Seater Soffa

Low Height Storage Providing, fitting and fixing of low height storage-cum-filing cabinet upto 850 (approx) mm. height made of 18mm. thick commercial block board, ply wood as specified for top, bottom, sides, shelves and hinged shutter and 6mm. Commercial ply as specified, for rear, fixed to the low height partition with wood screw and phenol bonded glue with exposed edges of teak wood lipping/mounlding polished with french polish and melamine finish and all exposed surface finished with 3 to 4mm. Thick approved veneer and inside surface finished with french polished fitted with hinged,lock, etc. complete in all respect as per design and direction of interior designer.With teak veneer/white ceder finished.Depth of storage 600mm. (approx.).

Centre Table 600 x900 x 450 mm with Glass Top

Side Table 600 x450 x 450 mm with Glass Top

Supplying Fitting and fixing in positioning table made up of pouder coated metal legs with necessary side ties having a block board with laminate finished top as per design and as per direction of Architect / E.I.C

Supplying, fitting and fixing of chairs medium backed with 'C' frames or four legged frame with arm base of the chairs are available in chromium planted or charcoal black matt powder quoted finish

Providing and fixing MS powder coated slotted angle rack .( Make : Godrej or Equivalent ) Open area Sitting

Supplying fitting and fixing in position outdoor quality resturent table-Size:1000(L) X 100(B) X 750(H) made up of pouder coated metal legs with necessary side ties having a veneer finished 19mm BWR thick plywood top fixed on stainless steel spacers and edge finished with 100mm wide 12mm thick BWR plywood edging duly topped with approved veneer as per design and as per direction of Architect / E.I.C

Supplying fitting and fixing in position outdoor quality resturent chair made out of 19mm tubular steel finished in silver epoxy finished seat up made of moulded in tough polypopline with approved colour finished as per design.

Supplying, fitting and fixing of umbella to protect the outdoor table. Umbrellas to have of powder coated MS frame and polyester / nylon base rain- and sun- resistant fabrics.

KITCHEN

Main Kitchen

THREE BURNER GAS RANGE ; 5' x 2' x 30"

SPREADER TABLE WITH 02 UNDER SHELVES; 4' x 2' X 30"

THREE BURNER GAS RANGE WITH UNDER SHELVE; 6' x 2' x 30"

SPREADER TABLE WITH SINK; 4' x 2' X 30"

SPREADER TABLE WITH 02 UNDER SHELVES; 4' x 2' X 30"

TANDOOR; 3.6' x 3.6' x 30"

CHICNESE GAS RANGE; 5' x 3' x 30"

FOUR BURNER GAS RANGE WITH UNDER COUNTER OVEN; 4'x3'x30"

DOSA PLATE GAS OVEN; 4' x 2' X 30"

STOCK POT BURNER; 2' x 2'x 30"

UNDER COUNTER REFRIGERATOR 6' x 30" x 30"

WORK TABLE CUM PICKUP COUNTER WITH 2 OVER HEAD SHELVES & 2 UNDER SHELVES 5' x 18" x 30"

WORK TABLE CUM PICKUP COUNTER WITH 2 OVER HEAD SHELVES & 2 UNDER SHELVES 6' x 2' x 30"

UNDER COUNTER REFRIGERATOR 5' x 30" x 30"

WORK TABLE CUM PICKUP COUNTER WITH 2 OVER HEAD SHELVES & 2 UNDER SHELVES 6' x 2' x 30"

CHEST FREEZER / ICE CREAM

SS STORAGE RACK 5' x 2' x 6'

TILTING WET GRINDER

PILPLIZER

POT WASH SINK 3' x 3' x 2'

POT CUM DISH RACK 5' x 30" x 6'

THREE SINK UNIT 6' x 2' x 30"

SOILED DISH LANDING UNIT 4' x 30" X 30"

COLD ROOM (+VE & - VE) TEMPERATURE 20' x 10'

STORAGE RACK 5' x 2' x 6'

STORAGE RACK 4' x 2' x 6'

STAFF KITCHEN

TILTING BOILER

TILTING BRATT PAN

COLD ROOM (+VE & - VE) TEMPERATURE20' x 10'

STOCK POT BURNER2' x 2' x 24"

STOCK POT BURNER2' x 2' x 24"

ROTI MAKER UNIT2' x 3' x 24"

WORK TABLE4' x 2' x 30"

WORK TABLE5' x 2' x 30"

WORK TABLE4' x 2' x 30"

WORK TABLE5' x 2' x 30"

MINCING MACHINE

POTATO PEELER

BUFFELO CHOPPER

INDUSTRIAL BLENDER

SINK DISH WASH UNIT6' x 2' x 30"

POT WASH UNIT3' x 3' x 24"

BAIN MARIE 8' x 2 ' x 30"

BAKERY KITCHEN

2 DECK GAS OVEN

MARBLE TOP WORK TABLE ( 7' x 4' x 30")

DOUGH KNEADER

SPIRAL MIXER

BREAD PROOFER

DOUGH SHEETER

Laundry

Supply and Installation of Mobile Wet Linen SS Trolleys as per approved by client and Architect. Size : 915mm X 610mm X 765mm

Supply and Installation of SPOTTING TABLE as per approved by client and Architect.

Supply and Installation of WASHER EXTRACTOR 60 Kg as per approved by client and Architect.

Supply and Installation of WASHER EXTRACTOR 30 Kg as per approved by client and Architect.

Supply and Installation of DRYER as per approved by client and Architect.

Supply and Installation of CALENDER MACHINE as per approved by client and Architect.

Supply and Installation of Vacuum Finishing Table as per approved by client and Architect.

Supply and Installation of 2 Table Capacity Steam Generator as per approved by client and Architect.

Supply and Installation of Linen Storage Racks as per approved by client and Architect.

GAS Bank and Leakage detection

Supply, installation, testing and commissioning of 40NB dia, Manifold for 15+15 Cylinders as per approved by EIC. Rate is inclusive of all necessary fittings ( upto 30 sets for 15+15 ) required for mainfold.

Supply, installation, testing and commissioning of High Pressure Regulator ,25 NB dia, High control

Supply, installation, testing and commissioning of High Pressure Filter ,25 NB dia, High flow

Supply, installation, testing and commissioning of Pressure Gauge . Make : Atlas/Wika or equivalent

Supply, installation, testing and commissioning of Pressure Needle control valve

Supply, installation, testing and commissioning of Cast Steel Ball Valve ( 40NB ) . Make : VEL/Punegas/Amco or equivalent

Supply, installation, testing and commissioning of Cast Steel Ball Valve ( 25NB ) . Make : VEL/Punegas/Amco or equivalent

Supply, installation, testing and commissioning of Cast Steel Ball Valve ( 15NB ) . Make : VEL/Punegas/Amco or equivalent

Supply, installation, testing and commissioning of 40NB GAS pipe line as per drawing .

Supply, installation, testing and commissioning of 25NB GAS pipe line as per drawing .

Supply, installation, testing and commissioning of Low Pressure Regulator ,25 NB dia, High control

Supply, installation, testing and commissioning of Oil & Dust separation strainer.

Suppy and installation of Burner hose - 5ft each

Supply, installation, testing and commissioning of Armoured 3 Core 1.5 Sqmm Copper Conductor PVC Cable with Conduit with holding channel for leak detection system.

Supply, installation, testing and commissioning of LPG Gas Monitor with 6 Channels, 2 Alarm Level, One relay for High Alarm, Operating Voltage 230 AC

Supply, installation, testing and commissioning of LPG Detector , with metal body, 0-100% LEL LPG complete with Junction Box and cable gland

Supply, installation, testing and commissioning of 9 Ltr Sand Bucket with cover

Supply, installation, testing and commissioning of Fire Ball Fire Extinguisher for Mainfold Rooms (1.2 Kg each )

Supply, installation, testing and commisioning of purification Equipment - Sintex PSTP NBF-15 or equivalent Package Domestic Waste Water Treatment System. Capacity - 15000 Liter/Day.

Supply, installation, testing and commisioning of Sintex TWST-10 KL or equivalent intermediate & Treated Water Storage Tank. Capacity 10000 Ltr

Supply, installation, testing and commisioning of Sintex TTP-1.0m3 or equivalent tertiary Treatment Plant ( ACF, PSF & Chlorine Dosing System) or equivalent. Capacity 10000 Ltr

Sanitary and Plumbing

Supplying, fitting & fixing as per specification drawing and direction and approved by client and Architects. Wall Hung W.C. E.W.C. while vitreous china ware "Kholer" make with seat and lid including brackets, rack bolt, with concealedcistern Kohler make CAT No. 7589 with wall facing control plate CAT No. 8857 including cutting wall (hole cutting chase cutting) as per instruction cistern to be fixed inside the wall by cutting wall etc. complete in all respects (if necessary core cutting are included by mechanical process/by machine).

a) Kholer make "PATIO".

b) Kholer make "Presquite".

Wall Hung "Hindware" make E.P.W.C. in white vitreous china ware with seat & lid including brackets/Sumo bolt, concealed cistern Hindware make Concealo Neo CAT No. 518236 and top facing control plate Cute , including cutting wall (hole/chase) cistern to be fixed inside the wall etc. complete in all respects. (if necessary core cutting are included by machine/mechanical process).

a)"Hindware" Ebello Rimless

b) "Hindware" Splendor Neo

c) "Hindware" Amazon

c)Hindware continental Anglo Indian "P"/"S"

Wall Hung "Hindware" make E.P.W.C. in white vitreous china ware with seat and cistern. Model : Slick Combo ( 519010 )

White vitreous china ware Urinal Kholer/Jaquar make with with brackets/brass screws, spreader, dome shaped grating, bottle trap (Jaquar), Angular stop cock (Joquar continental) or sensotronic concealed type flushing valve set with cutting hole/chase cutting and finishing the same complete in all respects. (Core cutting are included if necessary by machine/mechanical process). Contd……Item/4. a) Kholar make, CAT NO. ZAO22K (Struklura), Patio - 87917-COI-CP

b) "Hindware make ", CAT NO. 60018

C) "Hindware make ", CAT NO. 60001

Bath tub "kohler" / "Hindware" make with bath rail, single lever wall mixer with spout and hand shower including all accessoris "Cuff model" etc. with C.P. waste, O.F. and jointing with floor trap as per instruction complete in all respects all waste pipe line to be concealed in floor and wall as per instruction and approved by Architects/Owner.

Wash hand basin "Kholer" make wall hung with brackets/counter top basin with C.P. waste Jaquar make, Bottle trap Jaquar make, Basin mixer including connected with waste line from B.T. to waste pipe (32/40 dia) etc. complete in all respects with cutting hole/chase cutting in wall/Floor and repairing the same complete in all respects.

a) Basin "Kholer make" conical range, CAT No. 2200, Basin mixer, CAT No. ALCO-72298.

b) Basin "Kholer make" Forefront range, CAT No. 5373 Basin mixer, CAT No. July range without drain 15238.

c) Basin "Kholer make" Presquile range, CAT No. 4123 wall Hung, Basin mixer, CAT No. Alco - 72298.

d) Basin "Hindware make " CAT No. 10115 with basin CP Basin mixture

e) Basin "Hindware make " CAT No. 10087 with CP Basin mixer

f) Basin "Hindware make " CAT No. 91041 with CP Basin mixer

Shower arrangement "Jaquar" make shower panel "FLAIR" range, stainless steel structure Code No. GFL-CHR-GR000B1HOOX. Connected with pipe line etc. complete in all respects with all jointing materials/accessories.

Shower enclosure 2 parts Lara range "Jaquar" make. Pivot door height 1550mm X 700mm width 8mm thick glass with all Hardware fittings and clamping as per manufactgurer specification etc. complete in all respects.

Shower set complete i.e. O.H. shower, shower mixer, hand shower with spout including all accessories complete in all respects.

a) "Kohler" make July range, CAT No. 16316, CAT No. 882,O.H. shower rain forest CAT No.3867, with hand shower with hose including brackets CAT No. 9038, 37432 with spout, Singulier-11733, etc. complete in all respects.

b) "Jaquar" make continental range, CON-281KN, OHS-1849, SHA-549D8, SHA (Hook) 5665. HSH-35537, etc. complete in all respects.

Health Faucet Kohler make with tube and rest Hook etc. complete in all respects. Kholer CAT No. 12925, Hook-9038.

Two way bib cock "Kohler" make. Singuler range, CAT No. 11733.

Health Faucet Zaquar make with tube and rest rook etc. Complete in all respects. CAT No. ALD-CHR-565.

Two way Bib cock "Jaquar" make -

a) Continental.

b) Kubix.

Angular stop cock "Kholer/Jaquar" make.

a) "Kohler" make, Symbol range, CAT No. 11791.

b) Jaquar Continental with wall flange.

c) Jaquar Kubix.

Water heater, "Jaquar" make 15 ltrs. Capacity with wall hook/brackets including electrical connection complete in all respects..

Wash room hand dryer "Jaquar" make dual flow with brackets, brass screws etc. including electrical connection etc. complete in all respects.

C.P. Connector/ PVC Connector

Soap dish/Dispensor, Kohler/Jaquar make with C.P. Screws as per instruction with wooden blocks.

a) "Kohler" make, CAT No. 10712.

b) "Jaquar " make, CAT No. CAN-1135n.

Towel rail with brass screws with wooden block etc. complete in all respects.

a) "Kohler" make, CAT No. 5630.

b) "Jaquar" make, CAT No. 1101N0.

Robe Hook with C.P. brass screws, including wooden block etc. complete.

a) "Kohler" make, CAT No. 15247.

b) "Jaquar" make, CAT No. 1191.

Towel Rack with brass screws with wooden blocks etc. complete.

a) "Kohler" make, CAT No. 17529T.

b) "Jaquar" make, CAT No. 1181.

Dust Bin stainless steel of approved brand 300/400 dia. and 500 to 600 height.

Toilet paper holder with C.P. brass, screws with wooden blocks for fixing etc. complete in all respects.

a) "Kohler" make, CAT No. 3633.

b) "Jaquar" make, CAT No. 1151N.

Soap dish with C.P. brass screws including wooden block to be fixed in wall complete in all respects.

a) "Kohler" make, CAT No. 5634.

b) "Jaquar" make, CAT No. 1131N.

Glass shelf with C.P. brass screws including wooden blocks to be fixed in wall complete in all respects.

a) "Kohler" make, CAT No. 5634.

b) "Jaquar" make, CAT No. 1171N.

5mm thick glass mirror silvering as per I.S.I. Specifiocation of approved quality as per drawing and direction including masonite board in back side with dome shaped brass approved make screws etc. complete in all respects.

125mm dia. C.P. grating of approved make (cockroach type)

Providing and fixing of SS Grab Bar of 450 MM Length at Handicapped Toilet

Providing and fixing of SS Grab Bar of 600 MM Length at Handicapped Toilet

Providing and fixing of SS Folding seat at Handicapped Toilet

G.I. pipe Tata make (M) with all necessary accessories and specials as per P.W.D. item No. 1, page, Section (A) plumbing works (A)-(III) G.I. pipe works.

50 mm dia

32mm dia

25mm dia

20mm dia

15mm dia

S.C.I./C.I. pipe (I.S. 3989) 100 dia. with specials including lead joint including cutting hole in wall, floor and repairing the same and painting two coats inside and two coats of external faces with M.S./C.I. clamp or brackets/C.I. nail and bobbin etc. complete in all respects (including core cutting by machine) with opening and refixing are included in above item including scafolding etc

Testing of water pipe line, soil and waste pipe line after fixing of all sanitary fittings complete in all respects.

Supply,Installation,Testing of GI Fittings

Elbow

Reducer

50NB X 32NB

50NB X 15NB

20NB X 15NB

32NB X 25NB

25NB X 20NB

32NB X 20NB

Equal Tee

Supply,Installation,Testing of Cast Iron Body Valve. Make : Zoloto or equivalent

15mm dia Ball Valve (Isolation Valve)

20mm dia Ball Valve (Isolation Valve)

25mm dia Gate Valve (Isolation Valve)

32mm dia Gate Valve (Isolation Valve)

50mm dia Gate Valve (Isolation Valve)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials

Providing and fixing inspection pit cover of 25 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of 800 mm X 165 mm, cover of 680 mm X 90 mm, opening 500mm

ELECTRICAL

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) In 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell pointa with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size "Ph & N" copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Avarage run 9 mtr.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5mm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC)in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.

On Board

Supplying & Fixing GI Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

4 Module

Supplying & fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connection with PVC Cu wire and earth continuity etc.

Supplying & Fixing RJ45 suitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as requires.

Supply and Fixing Telephone socket (RJ11) Module type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as requied

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythere pipe embeded in wall.

Supplying & Drawing 2-pair Telephone cables with high ddensity polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying and fixing PVC Rigid Conduit 'FR' (Precision Make)on wall, celling with saddles and other accessories as required and mending good damages to building work

25mm size

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulaed & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (precision make) incl. cecy. Fittingsas required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

4 way Enclosure upto 160 Amp Legrand .

4 way Enclosure upto 250 Amp Legrand .

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.

Supplying and fixing 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

6-32Amp SP

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the

4 Way Legrand

6 Way Legrand

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works

175 mm x 100 mm x 65 mm

Suppply , delivery and installation of 10 Ltr 5 Star Rating Gyeser suitable for commercial use. Make : Havells / Bajaj / V Guard

Suppply , delivery and installation of hotel card unit. Make : Legrand / Hager / MK

Suppply , delivery and installation of Buzzer Make : Legrand / Hager / MK

Suppply , delivery and installation of internal & external DND/ MMR with door bell switch and light indicator along with control for DND/MMR Make : Legrand / Hager / MK

Suppply , delivery and installation of USB port Make : Legrand / Hager / MK

Suppply , delivery and installation of 400W rotary Dimmer Make : Legrand / Hager / MK

Suppply , delivery and installation of Shaver socket. Make : Legrand / Hager / MK

Suppply , delivery and installation of 43" Full HD LED smart TV suitable for commercial use. Make : LG / Panasonic / Sony

Suppply , delivery and installation of 75" Full HD LED smart TV suitable for commercial use. Make : LG / Panasonic / Sony

Suppply , delivery and installation of dual channel wired telephone receiver Make : Btel or equivalent

Supply and delivery of 23 cm exhaust fan with PVC base Make : Crompton / Havells / Usha

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

Supply and delivery of 56" ,5 star rating ceiling fan Make : Crompton / Havells / Usha

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes I) 3.5 core X 95 sq. mm. Make: Havells / Polycab / KEI

Supply and delivery 1.1 KV grade XLPE insulated stranded copper conductor un armoured cable of the following sizes I) 4 core X 35 sq. mm. Make: Havells / Polycab / KEI

Laying of 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes in the under ground trench having 460mm wide X 760 mm. average depth with 8 nos. of brick protection per meter / 40 mm dia HDPE Pipe on the top of the cable including excavation of earth in cutting trenches filling space between the brick and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supply & Delivery of facade luminaire with Hybrid optics , up-downwards for ambient lighting with die cast alluminium body , CCT 3000K , CRI >= 80, wattage not less than 36 Watt Make - K lite [Quad] or equivalnt

Supply & Delivery of facade luminaire with diffuser - downwards for ambient lighting with die cast alluminium body , CCT 3000K , CRI >= 80, wattage not less than 12 Watt Make - K lite [Focus Half Frame] or equivalnt

Supply & Delivery of Pendent luminaire with diffuser - downwards for ambient lighting with die cast alluminium body , CCT 3000K , CRI >= 80, wattage not less than 18 Watt Make - K lite [Sona Midi] or equivalnt

Supply & Delivery of surface mounted luminaire with diffuser - up & downwards light for ambient lighting with extruded alluminium body along with fabricated alluminium frame , CCT 3000K , CRI >= 80, wattage not less than 12 Watt Make - K lite [Wall Dena] or equivalnt

Supply & Delivery of LED strip lights conforming not less than 6 watt / mtr with dimmable driver and antiglare profile on the surface. This item should conform IP20 with 2700 K - 3000K colour temparature. Make: Signify / K lite / Crompton / Bajaj

Supply & Delivery of surface mounted linear luminaire with translucent diffuser - and alluminium body along with fabricated alluminium frame , CCT 4000K , CRI >= 80, wattage not less than 20 Watt Make - K lite / Crompton / Bajaj

Supply & Delivery of suspended linear luminaire with translucent diffuser - and alluminium body along with fabricated alluminium frame , CCT 4000K , CRI >= 80, wattage not less than 20 Watt Make - K lite / Crompton / Bajajlnt

Fixing only light fitting suspended 25 cm bellow the ceiling / COB / wall braket Etc. with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length

Supplying and delivering of DAIKIN make 415V-3Ph 50Hz Top Discharge type Next generation variable refrigeration volume system. Each Outdoor unit comprises of all inverter driven Compressors, air cooled condenser with protective coated fins, propeller type fan with motor, electronic expansion valve, microprocessor panel and other standard accessories as per specification the unit shall be suitable for operation with R-410A refrigerant. - Make - Daikin. 20 HP single modular Outdoor unit (20HPX1) / BlueStar / Voltus

Supplying and delivering of DAIKIN make 415V-3Ph 50Hz Top Discharge type Next generation variable refrigeration volume system. Each Outdoor unit comprises of all inverter driven Compressors, air cooled condenser with protective coated fins, propeller type fan with motor, electronic expansion valve, microprocessor panel and other standard accessories as per specification the unit shall be suitable for operation with R-410A refrigerant. - Make - Daikin. 16 HP single modular Outdoor unit (16HPX1) / BlueStar / Voltus

Supplying and delivering of DAIKIN make 415V-3Ph 50Hz Top Discharge type Next generation variable refrigeration volume system. Each Outdoor unit comprises of all inverter driven Compressors, air cooled condenser with protective coated fins, propeller type fan with motor, electronic expansion valve, microprocessor panel and other standard accessories as per specification the unit shall be suitable for operation with R-410A refrigerant. - Make - Daikin. 10 HP single modular Outdoor unit (10HPX1) / BlueStar / Voltus

Supply & installation of Daikin make 4 Way roundlflow Cassette type VRV Indoor unit of 3 TR capacity with cordless remote

Supply & installation of Daikin make Hi Wall type VRV Indoor unit of 2 TR capacity with cordless remote

Supply & installation of Daikin make Hi Wall type VRV Indoor unit of 1.5 TR capacity with cordless remote

Supply, Installation, Testing & Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick EPDM closed cell elastomeric insulation All insulation joints shall have tape of same material with equivalent fire rating as the insulation. Entire refrigerant piping work is to be carried out in accordance with the specifications.

Supplying and installation of copper pipe Y joints / refnets for application as distribution joint of of copper pipeline network to enable prpoer variable flow of regrigerant in the pipeline system

Supply & fixing of control cum transmission wiring of Copper conductor cable along with conduit for looping between indoor & outdoor VRF system

Supply and fixing of 25 mm dia rigid PVC drain piping complete with fittings, supports

Supply & fixing of standard MS Stand for Indoor unit and Tray

Nitrogen pressure testing, leak testing, vaccumisation and commissioning of VRV system with supply and charding of regfrigerant gas

Supply & fixing of control cum transmission wiring of Copper conductor cable along with conduit for looping between indoor & outdoor VRF system

Supply and fixing of 25 mm dia rigid PVC drain piping complete with fittings

Supply & fixing of base for outdoor unit including vibration pads for outdoor unit

SOUND SYSTEM

Art Studio (Gym , SPA & Reception)

Supply Installation Testing and Commissioning of 2.75-inch small format satellite surface loudspeaker with LF transducer N/A HF transducer 2.75 in (70 mm) weather treated paper cone woofer;Effective frequency range 150 Hz – 20 kHz;Rated noise power / voltage 25 W / 20 V (rms);Sensitivity [dB] (rated @1 W, 1 m) 82; Coverage (-6 dB) [°] 155° Conical; Directivity index [dB] 6.0; Directivity factor 4.0; Maximum SPL [dB] (rated,1 m (continuous / peak)) 4 94 / 97 / 100; Recommended amplifier 25 W per satellite(with 1st order high-pass filter at 200 Hz); Impedance 1652; Connector 2-pole Euroblock; Enclosure material ABS; Grille material Aluminum; Ingress protection IP-34; Operating environment Designed for indoor use. Preferred Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of 6.5-inch dual voice coil, small format surface subwoofer with LF transducer 6.5 in (165 mm) dual voice coil weather treated paper cone woofer; HF transducer N/A; Effective frequency range 45 Hz – 150 Hz; Rated noise power / voltage 100 W / 20 V (rms); Sensitivity [dB] (rated @1 W, 1 m) 86; Coverage (-6 dB) Omni; Maximum SPL [dB](continuous / program / peak) 105 / 108 / 111; Recommended amplifier 100 W; Transformer taps / impedance 70 V: 100, 50, 25, 12.5 W (mono only) 100 V: 100, 50, 25 W (mono only) Bypass: 4 Ω mono or 8 Ω + 8 Ω stereo; Connectors Hi-Z mono input: 4-pole Euroblock with thru output, Low-Z input: 4-pole Euroblock, left (mono) and right , Hi-pass output: x2 4-Pole Euroblock for x4 satellites; Enclosure material Vinyl wrapped medium density fiberboard; Port baffle / cover panel ABS; Ingress protection NA; Operating temperature range -4 to 122° F (-20 to 50° C). Preferred (AD-S.SUB Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of small format, surface mount loudspeaker with effective frequency range 70 Hz – 20 kHz; Rated noise power / voltage 16 watts / 11.3 volts (rms); Broad-band sensitivity 85 dB SPL ; Coverage angle (-6 dB) 130° conical (500 Hz - 5 kHz); Maximum continuous SPL 97 dB; Maximum peak SPL 103 dB; Rated impedance 8 ohms; Transformer taps 70 V: 16, 8, 4, 2, 1 watts,100V: 16, 8, 4, 2 watts 8 ohm bypass; LF transducer 100 mm [4 in] Polypropylene woofer 25 mm [1 in] voice-coil; HF transducer 25 mm [1 in] Aluminium dome tweeter 25 mm [1 in] voice-coil; Input connector type Euroblock connector with parallel output; Enclosure material UV treated, high impact ABS polymer; Grille material Powder coated steel; Yoke material Powder coated steel, brass inserts; Ingress protection IP-44. Preferred (AC-S4T) Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of Music and paging mixer/processor ,Supports up to 8 MP-MFC multi-function graphic controllers,Inputs-Total 8 ,Mic/Line 4 (Euroblock) ,RCA 4 (mono-summed RCA pairs) ;Outputs-Total 6 ;Line 4 (Euroblock, balanced) ;Music-on-Hold 1 (Euroblock, transformer balanced) ;Cue (phones) 1 (3.5 mm, stereo);Audio;Sampling frequency 48 kHz,Processing 32-bit floating point,THD <0.005%, +4 dBu and -2 dBr; 20 Hz-20 kHz, unity gain, any input to any output;Frequency response 20 Hz-20 kHz +/-0.5 dB, mic/line or line input to any line output;Dynamic range >106 dB unweighted;Crosstalk >90 dB typical, >80 dB max;Gain (mic inputs) 51 dB;Maximum input level +24 dBu (mic/line inputs), +10 dBV (line inputs);Maximum output level +21 dBu (line-level outputs), +10 dBV (music on hold);Phantom power All microphone inputs (+12 volts);Latency 2.3 msec;Input Processing-EQ 4-band parametric EQ with high/low shelving option, variable 24 dB/octave HPF and LPF Dynamics Gate, choice of Auto Gain Control (AGC) or compressor;Ethernet 1 x RJ45 for connection to Wi-Fi router (user supplied),MP-MFC ports 2 x RJ45,USB 2 USB-A (firmware & configuration uploads, USB Wi-Fi),GPI 2 inputs (Euroblock),Latency 2.3 msec,Power requirements 100-240VAC, 50-60 Hz, universal supply, IEC inlet.Preferred Make : QSC, Lab-Gruppen, TOA

Network Control I/O Chaneel Expander with phantom power for Mic Line Input (QIO-ML2x2) Make : QSC

Supply Installation Testing and Commissioning of Long-Distance IP-based UHD A/V Transmitter and encoder, Minimum 4K 4:4:4, HDMI IN, VGA IN Audio LPCM (8 Channels) / Bitstream, High Bit Rate Bitstream, MIC In, Audio Line Out, 1 x USB B port for USB over IP, IR in and OUT, RJ45 port for stream control, Support Unicast and Multicast, RS232 and RJ45 based Control, Web based GUI for operations. Power Over POE Preferred (OIP-D50E) Make :QSC, Lumens, Cypress

Supply Installation Testing and Commissioning of Long-Distance IP-based UHD A/V Transmitter and encoder, Minimum 4K 4:4:4, HDMI out, VGA out, Optical port and HDMI port for Audio LPCM (8 Channels) / Bitstream, High Bit Rate Bitstream, MIC In, Audio Line Out, 4x USB A port for USB over IP, IR in and OUT, 3 3 GbE LAN RJ45 port for stream control, Support Unicast and Multicast,Daisy Chainable to connect multiple device or to create a videowall RS232 and RJ45 based Control, Web based GUI for operations. Power Over POE Preferred (OIP-D50D) Make :QSC, Lumens, Cypress

Supply Installation Testing and Commissioning of 10 Port AV over IP Compatable, POE+ Switch with TOTAL POE BUDGET 125W, PORT TYPE with POE+ PORTS 8 x 1G, 2 x 1G, 2x SFP with Adjustabe FAN speed Preffered (AV Line M4250-10G2F-PoE+) Make- Dell, QSC, Netgear

Supply Installation Testing and Commissioning of OPTICAL TO ETHERNET CONVERTER (GPON-ONU) Make- SYROTECH

Supply Installation Testing and Commissioning of WiFi and Bluetooth 5.0 high res., audio streamer with air play,DLMA, wireless audio, reciever, alongwith aptX or any other low latency HD audio codec. Preferred Make : Branded

Supply Installation Testing and Commissioning of 1 mtr High Speed HDMI 2.0 or higher Cables as required .Preferred (C-Hm/Hm) Make : Kramer/ Belkin/ Taskar

Supply Installation Testing and Commissioning of STP CAT6 Cables Make : D-Link

Supply Installation Testing and Commissioning of 1.5 sqmm x 2 core ATC Vasiform .(K-EDGE-1.50-2- ATC) Preferred Make : Kramer/ Krystals/ Taskar

Restaurant

Supply Installation Testing and Commissioning of 2.75-inch Small Format Satellite Pendant Loudspeaker with HF transducer 2.75-inch (70 mm) weather treated paper cone woofer; Effective frequency range 150 Hz – 20 kHz; Rated noise power / voltage 25 W / 20 V (rms); Sensitivity [dB] (rated @1 W, 1 m) 82; Coverage (‐6 dB) [°] 170° Conical; Directivity factor TBD; Directivity index [dB] TBD; Maximum SPL [dB](rated, 1 m (continuous / peak)) 90 / 96; Recommended amplifier 25 W (with 1st order high-pass filter at 200 Hz); Impedance: 16 Ω; Connectors 2-pole Euroblock; Enclosure material ABS; Grille material Powder coated steel; Ingress protection IP-34 Preferred (AD-P.SAT) Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of 6.5-inch Dual Voice Coil, Small Format Pendant Subwoofer LF transducer 6.5-inch (165 mm) dual voice coil weather treated paper cone woofer; Effective frequency range 55 Hz – 150 Hz; Rated noise power / voltage 100 W / 20 V (rms); Sensitivity [dB] (rated @1 W, 1 m) 86; Coverage (-6 dB) Omni; Maximum SPL [dB] (continuous / peak) 100 / 106; Recommended amplifier 100 W; Transformer taps / impedance Bypass:4 Ω 100 W (70 V); NA (100 V) Tap: 50 Ω, 50 W (70 V); 100 W (100 V) Tap: 100 Ω, 25 W (70 V); 50 W (100 V) Tap: 200 Ω, 12.5 W (70 V); 25 W (100 V) Tap: 400 Ω; Connectors Mono input: 4-pole Euroblock with thru output; Hi-pass mono output: 2x 4-pole Euroblock for 4x satellites; Enclosure material ABS; Grille material Powder coated steel; Ingress protection IP-34 Preferred Make : QSC, TOA, Tannoy (AD-P.SUB)

Supply Installation Testing and Commissioning of Four-Channel Network Amplifier with Flexible & efficient channel power distribution, Four channels of mic/line inputs (with +12 V phantom power) for additional on-ramps via software ; Touch-proof Euroblock loudspeaker connections; maximum power of up to 2000 W. Low-Z, 70 V or 100 V direct drive are available on all channels Supported network protocol Q-Sys, AES67 or Dante (CX-Q 2K4) Preferred Make :QSC, TOA, Lab-Gruppen

Supply Installation Testing and Commissioning of Long-Distance IP-based UHD A/V Transmitter and encoder, Minimum 4K 4:4:4, HDMI IN, VGA IN Audio LPCM (8 Channels) / Bitstream, High Bit Rate Bitstream, MIC In, Audio Line Out, 1 x USB B port for USB over IP, IR in and OUT, RJ45 port for stream control, Support Unicast and Multicast, RS232 and RJ45 based Control, Web based GUI for operations. Power Over POE (OIP-D50E) Preferred Make :QSC, Lumens, Cypress

Supply Installation Testing and Commissioning of Long-Distance IP-based UHD A/V Transmitter and encoder, Minimum 4K 4:4:4, HDMI out, VGA out, Optical port and HDMI port for Audio LPCM (8 Channels) / Bitstream, High Bit Rate Bitstream, MIC In, Audio Line Out, 4x USB A port for USB over IP, IR in and OUT, 3 3 GbE LAN RJ45 port for stream control, Support Unicast and Multicast,Daisy Chainable to connect multiple device or to create a videowall RS232 and RJ45 based Control, Web based GUI for operations. Power Over POE (OIP-D50D) Preferred Make :QSC, Lumens, Cypress

Supply Installation Testing and Commissioning of WiFi and Bluetooth 5.0 high res., audio streamer with air play,DLMA, wireless audio, reciever, alongwith aptX or any other low latency HD audio codec.

Supply Installation Testing and Commissioning of 26 Port AV over IP Compatable, POE+ Switch with TOTAL POE BUDGET 300W, PORT TYPE with POE+ PORTS 24 x 1G, 2 x 1G, 4x SFP with Adjustabe FAN speed Preffered Make- Dell, QSC, Netgear

Supply Installation Testing and Commissioning of OPTICAL TO ETHERNET CONVERTER MAKE : SYROTECH

Supply Installation Testing and Commissioning of 1 mtr High Speed HDMI 2.0 or higher Cables as required (C-Hm/Hm).Preferred Make : Kramer/ Belkin/ Taskar

Supply Installation Testing and Commissioning of STP CAT6 Cables Make : D-Link

Supply Installation Testing and Commissioning of 1.5 sqmm x 2 core ATC Vasiform(K-EDGE-1.50-2- ATC).Preferred Make : Kramer/ Krystals/ Taskar

Hotel BGM

Supply Installation Testing and Commissioning of small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback, can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain Enclosure 2-way bass-reflex type; Rated Input 30 W; Rated Impedance 8 Ω; 100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W); 70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W); Sound Pressure Level 90 dB (1 W, 1 m); Frequency Response 80 Hz - 20 kHz Speaker Component 12 cm cone-type + dome-type; Speaker Cord 2-core cabtyre cord with diameter of 6 mm; Operating Temperature -10 ℃ to +50 ℃; Water Protection IPX4 (can be installed vertically or horizontally.*); Finish Enclosure: ABS resin, paint; Net: Surface treated steel plate, powder coating; Bracket: Surface treated steel plate, powder coating (BS-1030B) Preferred Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of Four-Channel Network Amplifier with Flexible & efficient channel power distribution, Four channels of mic/line inputs (with +12 V phantom power) for additional on-ramps via software ; Touch-proof Euroblock loudspeaker connections; maximum power of up to 2000 W. Low-Z, 70 V or 100 V direct drive are available on all channels Supported network protocol Q-Sys, AES67 or Dante (CX-Q 2K4) Preferred Make :QSC, TOA, Lab-Gruppen

Supply Installation Testing and Commissioning of 10 Port AV over IP Compatable, POE+ Switch with TOTAL POE BUDGET 125W, PORT TYPE with POE+ PORTS 8 x 1G, 2 x 1G, 2x SFP with Adjustabe FAN speed (AV Line M4250-10G2F-PoE+) Preffered Make- Dell, QSC, Netgear

Supply Installation Testing and Commissioning of OPTICAL TO ETHERNET CONVERTER (GPON-ONU) MAKE : SYROTECH

Supply Installation Testing and Commissioning of STP CAT6 Cables +

Supply Installation Testing and Commissioning of 1.5 sqmm x 2 core ATC Vasiform (K-EDGE-1.50-2- ATC) .Preferred Make : Kramer/ Krystals/ Taskar

Conference Room

Supply Installation Testing and Commissioning of Digital Chairman Discussion Unit with built-in Digital Signal Processing, Unit with Priority and Next-in-Line Configuration, Priority button silences all delegate microphones and allows only the chairperson to speak, Next-in-line button gives the floor to the next speaker in a waiting list of speakers who requested to speak, User Button with Feedback, Shielded microphone, immune to mobile phone interference, High-quality integrated loudspeaker, Headphone output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-15kHz (D-Cerno C SL). Preffered Make: Televic, Beyerdynamic, TOA

Supply Installation Testing and Commissioning of Digital Delegate Discussion Unit with built-in Digital Signal Processing, User Button with Feedback, Shielded microphone, immune to mobile phone interference, High-quality integrated loudspeaker, Headphone output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-15kHz (D-Cerno D SL). Preffered Make: Televic, Beyerdynamic, TOA

GSM immune gooseneck microphone of 40 cm with screwlock. Bi-color led ring indication (red / green). Windscreen included. Compatable with Supplied Conferencing system D-MIC40SL Preffered Make: Televic, Beyerdynamic, TOA

Supply Installation Testing and Commissioning of Eight-Channel Network Amplifier with Flexible & efficient channel power distribution, Eight channels of mic/line inputs (with +12 V phantom power) for additional on-ramps via software ; Touch-proof Euroblock loudspeaker connections; maximum power of up to 4000 W. Low-Z, 70 V or 100 V direct drive are available on all channels Supported network protocol Q-Sys, AES67 or Dante (CX-Q 4K8) Preferred Make :QSC, TOA, Lab-Gruppen

Supply Installation Testing and Commissioning of 16-driver column surface-mount loudspeaker. Transducer (x16) 2.75 in (69.8 mm) weather treated paper cone woofer: Effective frequency range: 90 Hz – 17 kHz; Sensitivity [dB] Rated @1W, 1m: 89 (Narrow) 88 (Wide); Coverage (‐6 dB) [°] Horizontal x Vertical 160 x 15 (Narrow) / 30 (Wide), 500Hz: 180 x 52 / 52, 1kHz: 180 x 26 / 28, 2kHz: 160 x 18 / 28, 4kHz: 180 x 13 / 30; Directivity index [dB] 11 (Narrow) 13 (Wide); Maximum SPL [dB] Rated, 1m (continuous / peak) 7 : 112 / 118 (Narrow) 111 / 117 (Wide); 4m (low-Z / Highest-tap) 9; Recommended amplifier 250 watts; Transformer taps / impedance: Bypass 8Ω; 15W (70V); 30W (100V) Tap: 333Ω; 30W (70V); 60W (100V) Tap: 167Ω; 60W (70V); 120W (100V) Tap: 83Ω; 120W (70V); N/A (100V) Tap: 42Ω; Input connector type: Euroblock connector with parallel output; Enclosure material: Powder coated aluminum; Grille material: Powder coated aluminum; Ingress protection: IP-54 (AD-S162T) Preferred Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of 4.5-inch weather treated woofer; 0.75-inch silk dome tweeter; 120° conical coverage 30 watt low-saturation and low-loss 70/100V transformer with 8Ω bypass; Maximum peak SPL 110 dB (8 ohm bypass); Mount system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time; Lightweight ABS enclosures offer long-term durability and lasting good looks Sealed input panel cover and powder coated aluminum grilles for added weather resistance Meets IEC60529 IP-54 for dust and splash resistance Preferred Make : QSC, TOA, Tannoy (AD-S4T)

Supply Installation Testing and Commissioning of audio, video and control (AV&C) processor; 64 x 64 networked audio channels (Must support Q-LAN / AES67/ Dante); 8x on-board Software configrable i/o channels with +48 VDC, 10 mA per input max; 24 bit 48khz; 2x RS232, 8x8 GPIO; 8x AEC processors, 4 ch recording / 16 ch playback, 8 x 8 Dante audio channels included (upgradable upto 32 x 32); USB AV bridging; Full-featured Control engine (with User Control Interface and 3rd part control scripting license); External USB audio device host; Up to 2x VoIP instances; 1U half-width, includes mounting hardware Preffered Make: QSC, Bi-Amp, Clearone (Core-8 Flex UCI and Scripting license).

Supply Installation Testing and Commissioning of Full HD PTZ Camera supporting 1080p at 60 Frames per Second, minimum 12X Optical Zoom, with IP, HDMI, USB 3.0 & 3G-SDI Output, min 256 Presets, RS232/422 and IP Controls, -170° ~ +170° Panning angle, -30° ~ +90° Tilting angle , Minimum FoV 72 deg,Should support PoE & should be compatible with Virtual USB Driver. OEM should be BIS, CE,RoHS & FCC Certified (VCR30) Preffered Make- Lumens, QSC, Atlona

Supply Installation Testing and Commissioning of High Definition 7" Touch Screen Controller Projective Capacitive (PCAP) Multi-Touch Surface with 24-bit Color Display; High Resolution Display: 1280 x 800 px with 400 Nits (brightness); Power Over Ethernet: Allows for simplified single cable installation; Universal Mounting Options: Included accessories for mounting to US standard and European wall and junction boxes Versatile: Ability to operate in portrait or landscape orientation (TSC-70-G3) Preffered Make: QSC, Bi-Amp, Atlona

Supply Installation Testing and Commissioning of 1.5 sqmm x 2 core ATC Vasiform (K-EDGE-1.50-2- ATC) .Preferred Make : Kramer/ Krystals/ Taskar

Supply and Delivery of Panel Size: 98",Type/Tech: TFT LCD Module with DLED Backlight.,Display Area (mm): 2171.85(H) x 1232.35(V) (97.52”diagonal)Aspect Ratio: 16:9,Native Resolution: UHD 3840x2160(Pixels),Colours: 1.07B colours (10bit),Brightness: 350 nits (typ.),Contrast Ratio: 5000:1 (DCR),Response Time: 6ms,Viewing Angles: H = 178, V = 178 typ.,Backlight Life: 30,000 Hours (Min),Surface Treatment: Anti-Glare, Orientation: Landscape,Processor: ARM Cortex A73*2(1.5GHz)+A53*2(1.2GHz),RAM: 3GB DDR4, Storage: 16GB,Type/ Tech: IR Recognition,Touch Resolution: 32767 x 32767,Touch Point: 20 points touch, 10 points writing, Temperature (º C): 0°C to 40°C,Humidity: 10% ~ 90% RH non-condensing, Voltage: 100-240VAC +/- 10% Wide Range (IFP9850-3) Approved Make- Viewsonic, Prysm, Christie

Supply and Delivery of Display Panel Size: 55", Type/ Tech: "TFT LCD Module. IPS type, DLED backlight", Display Area (mm): 1209.6 (H) x 680.4 (V) (55” diagonal), Native Resolution: 3840 x 2160, Aspect Ratio: 16:9, Colors: 1.07B colors, Brightness: 400 nits (typ.), Contrast Ratio: 1200:1 Typ., Response Time: 8 ms, Viewing Angles: H = 178, V = 178 typ., Backlight Life: 30,000 Hours Min, Surface Treatment: Anti-Glare, 2H, Haze 3%, Bezel Slim, Orientation: Landscape, HDMI: x2, DVI: x1, Audio: x1 (3.5mm), RS-232: x1, IR Pass Thru: x1, Audio: x1 (RCA), SPDIF: x1 (Fiber),IR Pass Thru: x1,RJ45: x1, USB Type A: 2.0 Type A : x2 (USB Playback), SPEAKERS: 10Wx2, RGB PC/HDMI PC: Up to 1920x1080@60Hz. Refer to timing table, HDMI: 480i, 480p,720p,1080i,1080p, 4K2K@60Hz, DVI: 480i, 480p,720p,1080i,1080p, Android Version: Android 8.0, Voltage: 100-240 VAC +/- 10% Wide Range, Consumption: Normal 100 W, Max 114.5 W, Wall Mount (VESA® ): 400x200 mm, OPERATING CONDITIONS Temperature (º C): 0 to 40°C, Humidity: 20% ~ 80% non-con DIMENSIONS (W x H x D), Physical (inch / mm): 48.94 x 28.11 x 2.94 in/1243.2 x 714 x 74.8 mm, Packaging (inch / mm): 55.90 x 35.83 x 9.65 in/1420 x 910 x 245 mm, Net (lb / kg): 16.8 kg / 37.04 lbs, Gross (lb / kg): 23.95 kg / 52.8 lbs Approved (CDE5520) Make- Viewsonic, Christie, Sharp

Supply Installation Testing and Commissioning of HDBaseT receiver for HDMI, Ethernet, power, control, and USB, USB 2.0 interfacing and extension up to 330 feet (100 meters) 4K/UHD capability @ 60 Hz with 4:2:0 chroma, subsampling; HDCP 2.2 compliant; Remote powering over HDBaseT or local poweringt (AT-OME-EX-RX). Approved Make- Atlona, QSC, Lightware

Supply Installation Testing and Commissioning of 1×4 HDMI distribution amplifier,4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats,HDCP 2.2 compliant,EDID management,Supports cascading up to eight units (AT-RON-444) Approved Make- Atlona, QSC, Lightware

Supply Installation Testing and Commissioning of HDMI Extender Kit which supports resolutions up to 4K/UHD 60 Hz 4:2:0,Remote power, transmitter powers receiver over HDBaseT,EDID filtering prevents extension of unsupported resolutions,HDBaseT link test verifies cable, termination, and link quality,HDCP 2.2 compliant (AT-AVA-EX70-KIT) Approved Make- Atlona, QSC, Lightware

Supply Installation Testing and Commissioning of 10 Port AV over IP Compatable, POE+ Switch with TOTAL POE BUDGET 125W, PORT TYPE with POE+ PORTS 8 x 1G, 2 x 1G, 2x SFP with Adjustabe FAN speed Preffered Make- Dell, QSC, Netgear (AV Line M4250-10G2F-PoE+)

Supply Installation Testing and Commissioning of OPTICAL TO ETHERNET CONVERTER (GPON-ONU) MAKE : SYROTECH

Supply Installation Testing and Commissioning of STP CAT6 Cables Make : D-Link

Supply Installation Testing and Commissioning of 1.5 sqmm x 2 core ATC Vasiform (K-EDGE-1.50-2- ATC) .Preferred Make : Kramer/ Krystals/ Taskar

Common Area and Reception

Supply Installation Testing and Commissioning of small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback, can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain Enclosure 2-way bass-reflex type; Rated Input 30 W; Rated Impedance 8 Ω; 100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W); 70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W); Sound Pressure Level 90 dB (1 W, 1 m); Frequency Response 80 Hz - 20 kHz Speaker Component 12 cm cone-type + dome-type; Speaker Cord 2-core cabtyre cord with diameter of 6 mm; Operating Temperature -10 ℃ to +50 ℃; Water Protection IPX4 (can be installed vertically or horizontally.*); Finish Enclosure: ABS resin, paint; Net: Surface treated steel plate, powder coating; Bracket: Surface treated steel plate, powder coating (BS-1030) Preferred Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of Outdoor Garden Speaker Rated Input 30 W (100 V line), 15 W (70 V line); Rated Impedance 100 V line: 330 Ω (30 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W), 3.3 kΩ (3 W); 70 V line: 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W); Sensitivity 87 dB (1 W, 1 m); Frequency Response 100 - 8,000 Hz; Speaker Component 12 cm splash-proof cone-type; Input Terminal Push-in terminal; Applicable Cable Solid copper wire: φ0.8 - φ1.6 mm, Stranded cooper wire: 0.75 - 1.25 m㎡; Water Capability Equivalent to IPX4; Finish Top cover and base: FRP resin, dark gray, semi-gloss, paint; Speaker panel: ABS resin, dark gray, semi-gloss, paint Legs: Aluminum, dark gray, semi-gloss, paint (GS-302) Preferred Make : QSC, TOA, Tannoy

Supply Installation Testing and Commissioning of Four-Channel Network Amplifier with Flexible & efficient channel power distribution, Four channels of mic/line inputs (with +12 V phantom power) for additional on-ramps via software ; Touch-proof Euroblock loudspeaker connections; maximum power of up to 2000 W. Low-Z, 70 V or 100 V direct drive are available on all channels Supported network protocol Q-Sys, AES67 or Dante (CX-Q 2K4) Preferred Make :QSC, TOA, Lab-Gruppen

Supply Installation Testing and Commissioning of Long-Distance IP-based UHD A/V Transmitter and encoder, Minimum 4K 4:4:4, HDMI IN, VGA IN Audio LPCM (8 Channels) / Bitstream, High Bit Rate Bitstream, MIC In, Audio Line Out, 1 x USB B port for USB over IP, IR in and OUT, RJ45 port for stream control, Support Unicast and Multicast, RS232 and RJ45 based Control, Web based GUI for operations. Power Over POE (OIP-D50E) Preferred Make :QSC, Lumens, Cypress

Supply Installation Testing and Commissioning of Long-Distance IP-based UHD A/V Transmitter and encoder, Minimum 4K 4:4:4, HDMI out, VGA out, Optical port and HDMI port for Audio LPCM (8 Channels) / Bitstream, High Bit Rate Bitstream, MIC In, Audio Line Out, 4x USB A port for USB over IP, IR in and OUT, 3 3 GbE LAN RJ45 port for stream control, Support Unicast and Multicast,Daisy Chainable to connect multiple device or to create a videowall RS232 and RJ45 based Control, Web based GUI for operations. Power Over POE Preferred (OIP-D50D) Make :QSC, Lumens, Cypress

Supply Installation Testing and Commissioning of Centralized management of Av-Over IP series encoders and decoders, Controls matrix switching, video wall deployment, and KVM connections ; Intuitive web-based interface for device management and control; Supports PoE for easy installation Output HDMI 1.4; Control: 1 IR Extender (3.5mm), 1 RS-232 (3-pin Terminal Block), 8 Trigger (10-pin Terminal Block), 1 USB 2.0 (Type-A) 2 Ethernet (RJ-45), Reserved Port 1 RS-232 (5-pin Terminal Block), Output Signal Type HDMI 1.4 1080p60, AUDIO: HDMI LPCM (8 Channels) / Bitstream / HD Bitstream (OIP-D50C) Preferred Make :QSC, Lumens, Cypress

Supply Installation Testing and Commissioning of 10 Port AV over IP Compatable, POE+ Switch with TOTAL POE BUDGET 125W, PORT TYPE with POE+ PORTS 8 x 1G, 2 x 1G, 2x SFP with Adjustabe FAN speed (AV Line M4250-10G2F-PoE+) Preffered Make- Dell, QSC, Netgear

Supply Installation Testing and Commissioning of OPTICAL TO ETHERNET CONVERTER (GPON-ONU) Make- SYRO

Supply Installation Testing and Commissioning of STP CAT6 Cables Make : D-Link

2 core Shielded Mic Cable-25/42 SWG- ATC Lapp (MIC-HFS-SLM-DIG)

Supply Installation Testing and Commissioning of 1.5 sqmm x 2 core ATC Vasiform . (K-EDGE-1.50-2- ATC) Preferred Make : Kramer/ Krystals/ Taskar

Add CGST @ 9%

Add SGST @ 9%

Workers welfare cess - 1%

Godrej and Boyce Mfg. Co. Ltd.

SRISHTI ENTERPRISES

Shandar Interior Private Limited