SITC of air conditioning system in LG 8 9 and 10 at

Amount

Supply, installation, testing and commissioning of Ductable Split Air conditioner unit equipped with scroll compressor, efficient oil separator with demister pad, accumulator for long piping, pre-charged refrigerant R410a, DX evaporator coil, protection against discharge line temperature (DLT) rise, oil shortage, HP-LP, Single phasing, over & under Voltage, overload, thermal protection for ODU (Outdoor Unit) fan motor, reverse rotation protection for ODU fan motor having auto back up, conformal coating for PCBs, Touch screen controller, high speed two way communication (RS485), air filters efficiency of 90% (10 Micron)non woven polyester media enclosed in HDPE mesh, centrifugal blower with forward / backward curved, enclosed in sheet metal cabinet duly powder coated GI steel, suitable for operation on voltage range 340 to 460, 50 Hz ac supply & temp range 21 - 52 degree C, including interconnection between indoor (IDU) & out door (ODU) unit, etc. complete as required. (Make: Hitachi / LG / Blue Star / O-General/Blue star)

16.5 TR capacity

11 TR capacity

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 mm sheet

Thickness 0.80 mm sheet

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with volume control dampers complete as required.

Supplying and fixing of 19 mm thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

Supply, Installation, testing & commissioning of suitable Refrigerant piping for connecting Indoor and Outdoor units (Suction & discharge) with 9 mm thick nitrile foam insulation including copper pipes, fitting, support, saddles, pressure testing, tagging & evacuation. Minor civil works like brick wall, chasing or cutting is included in contractor scope and nitrile foam insulation sleeves to be properly taped on the joint, further quantity shall be measured one way considering single circuit per machine .

Hard PVC Plumbing grade drain piping with 6mm Nitrile Insulation & pipe support.

Supply & laying of Electric CONTROL Cable From Indoor To outdoor

Supply & fixing of canvas

Fabricating, Providing and fixing M.S. frame for outdoor units including painting the framework etc. complete as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 4 sq. mm

2 x 2.5 sq. mm

Aqua Cool Co. Pvt.Ltd.