SPECIAL REPAIR TO ROOF IN SIX BLOCK BLGS AT JN ROAD KAMPTEE

Amount

Dismantling of asbestos cement/translucent (corrugated / semi-corrugated etc.,) sheets in roof coverings including ridges complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour in profile pattern having tensile strength of 550 Mpa as in roof covering and on chajjas, fixed with self tapping screws at every 30Cm, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of any colour in profile pattern having tensile strength of 550 Mpa as in roof serrated ridge, fixed with self tapping screws complete all as specified and as directed.

Dismantling of brick work or stone/boulder masonry built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and as directed

Taking down cement plaster of any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:6 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:4 on external faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and as directed.

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in foundation, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamferred on edges, complete all as specified and as directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc.,) or insulation board, slabs, blankets, any thickness including cover fillets complete all as specified and as directed.

S&F Structural rolled mild steel section work as in rafters, purlins and posts etc., where connected to common rafters and running rails fixed with angle cleats or other connecting plates and nut, bolts etc., including special shaped washer etc. conforming to Fe-410 (Gde E-250), complete all as specified and as directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, for exc 5cm and n exc 30cm long and 10mm dia neck screw bolts, complete all as specified and as directed

Supply & fix GI framework for seamless false ceiling of size 605mm x 605mm comprising of hot deep galvanized powder coated perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.90mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm cencre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre etc., hangers 4mm dia GI (upto 1200mm length) adjusting level, fixed to roof slab by means of ceiling cleats made of GI flat40 x 3mm size, 60mm long and expension hold fasteners 12.5mm dia, 40mm long, complete all as per manufacturer's recommendations, with and including non-asbestos designer fibre cement building boards 4mm thick of required size, fixed or laid /inserted to GI frame work with screws/clips as in ceiling laid flat or sloping complete all as directed. Note: (i) Ceiling boards shall be deemed to be included in the quoted rate. (ii) The grid system shall be as per specification of make as specified and directed.

M&L for old decorated surfaces of walls of any description by washing, rubbing down and stopping of distempered or painted or existing treatment, preparation of surfaces and applying two coats of oil emulsion distemper (acrylic), of approved make & Shade as approved by GE, complete all as specified and as directed.

M&L for complete removal of existing treatment, preparation of surfaces of walls & applying two coats of cement base paint of approved make complete all as specified and as directed.

Material & labour for preparation of old wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel or iron works of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.1,43,280.00 /- ]

M/S Ramakant Chourasia

M/S L M Chourasia

M/s T.S.JOHAR

M/s B S Jain

Raj Engineering Works

M/s DS Khekde

chronicle enterprises

SHUB CONSTRUTION

M/s Rahul Traders

DE PRETTY AND CO

Bidder Name

DE PRETTY AND CO

chronicle enterprises

SHUB CONSTRUTION

M/S L M Chourasia

M/s T.S.JOHAR

Raj Engineering Works

M/s B S Jain

M/s Rahul Traders

Shri Mohan Brother

M/s DS Khekde

M/S Ramakant Chourasia