PROVN OF TOILET BLOCK NEAR BUILDING NO PB-83, ADDN /ALTN TO BLDG NO PB-55 OF NCO ACADEMY AND PROVN OF BULK METERS FOR BULK CONSUMPTION ONLINE ENERGY MONITORING AT DHANA MIL STN.

Amount

Excavating in trenches not exc 1.5 Mtr wide & not exc 1.5 Mtr depth for foundation or for shafts, wells, cesspits, manholes etc and getting out Hard/dense soil, complete all as specified and directed.

Material & Labour for PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed.

Material & Labour for cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Material & Labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6, complete all as specified and directed.

Material & Labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:4,complete all as specified and directed by Engg-In-Charge.

Material & Labour for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate in floor sub base, complete all as specified and directed.

Material & Labour for Formwork to flat chhajja, rough finished flat surface of concrete including edges, complete all as specified and directed.

Material & Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed.

Material & Labour for Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc., complete all as specified and directed.

Material & Labour for Mild steel bars 5mm and over upto and including 10mm dia in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc., complete all as specified and directed.

Material & Labour for RCC type B-1, 1:2:4, (by using 20mm graded stone aggregate) as in chhajja, complete all as specified and directed.

Material & Labour for RCC types A1, 1:1½:3 (20mm graded aggregate) as in beam, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.

Demolition of brick work built in cement mortar of any description including quoins, arches but excluding ashlars facing, complete all as specified and directed by the Engr-in-charge.

Taking down plaster on brick or concrete surfaces including raking out joints for key and scrubbing down with water etc., complete all as specified and directed.

Material & Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces, even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% by weight of cement, complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately)

Material & Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement in CM (1:6), complete all as specified and directed.

Material & Labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement), complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement, complete all as directed and directed. Note:- WPC shall be measured and paid separately.

Material & Labour for rendering 5mm thick in CM (1:3) on concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

Supply only integral water proofing compound complete all as specified & directed.

Material & Labour for two coats of Oil bound distemper including preparation of newly plastered wall surface over a coat of 1.5 mm thick Birla wall care putty, complete all as specified and directed.

Material & Labour for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Material & Labour for Preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed.

Material & Labour for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper, complete all as specified and directed.

Material & Labour for applying a coat of 1.5 mm thick Birla wall care putty as per manufacture instruction, complete all as specified and directed.

Material & Labour for complete removal of existing treatment by scrapping, wire brushing from old walls and applying two coats of oil bound distemper including preparation of surfaces, complete all as specified and directed.

Material & Labour for complete removal of existing treatment and applying two coats of weather proof exterior paint over a coat of primer and putty where required on wall including preparation of surfaces, complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash, complete all as specified and directed.

Material & Labour for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying two coat of white wash, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick above or below ground level, complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base, complete all as specified and directed.

Material & Labour for machine cut kota stone slab (one piece steps) flooring 20-25mm thick over 15mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Material & Labour for kota stone slab 20-25mm thick in riser of steps (one piece type), skirting, dado and pillar laid over 10 mm thick backing coat of cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Taking down chowkhats or frames exc 1.50 sqm but n. exc. 4.00 sqm with shutters (without taking of shutter from frame ) etc, complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking of shutter from frame) etc, complete all as specified and directed.

Material & Labour for preparation of old steel surfaces and applying one coats of synthetic enamel paint of any description over 10 cm width and girth, complete all as specified and directed.

Material & Labour for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw, complete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement. complete all as specified and directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates, aluminium grill including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron.

Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type or sliding type or fixed type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, rubber neoprene packing , anodised aluminium snap beading, screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no), hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt (2 nos) etc., complete all as specified and directed.

Supply and fixing aluminium anodised powder coated door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium anodised powder coated fitting such as handles 2 Nos, 100 mm hinge 3 Nos, 200 tower bolt 2 Nos, mortice lock including keys 1 set, anodised aluminum snap beading screws etc complete all as specified and directed. Note :- Minimum thickness of powder coating 50 Micron.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply & fixing frosted glass / tinted glass 4.8mm thick ordinary quality glazing in aluminium frames and MS pre coated frames with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in each pane, complete all as specified and directed. Make :- Modi guard/Saingobin/Haryana glass

Supply and fixing Aluminum (Die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fixing 18 mm thick Plywood over door / window frame and walls in girth not less than 0.60 M in interior decoration complete with necessary fitting like glue or any other binding material and ply filling in gap between wall and Plywood frame, complete all as specified and directed by Engr in Charge.

Supply and fixing 1 mm thick laminates / Sunmica/ decorative face veneers in any design/colour/pattern over door / window cup board or Plywood in interior decoration fixed with glue or any other binding material, complete all as specified and directed by Engr in Charge.

Supply and fixing aluminium anodised powder coated frame with glass (sliding type or fixed type) including necessary jointing cleats, glazing clips, rubber neoprene packing , anodised aluminium snap beading, screws, including powder coated anodised aluminium fittings such as suitable handle (2 no) and lock system etc., complete all as specified and directed.

Supply & Fixing for venetian blind for windows any wide vertical / horizontal type of fabric as approved including bracket and all accessories of Make :- VISTA or equivalent as approved, complete all as specified and directed.

Supply and fixing 100 mm butt hinges stainless steel medium weight of approved make, complete all as specified and directed.

Supply and fixing 125 mm aluminium alloy handles, cast type anodized, complete all as specified and directed.

Supply and fixing 150mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

Supply and fixing 300 mm aluminium alloy sliding door bolts with hasp and staple bolt type and fixing clips of sheet cast or extruded section and fixing and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

Material & Labour for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded aggregate) screed bed below floor tile etc., complete all as specified and directed.

Material & Labour for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of 15 mm thick, in CM 1:6, complete all as specified and directed.

Material & Labour for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6, complete all as specified and directed.

Material & Labour for Glazed ceramic coloured walls tiles in vertical surfaces 300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles, complete all as specified and directed.

Supply and fixing 18 to 20mm thick machine cut granite urinal partition of size 0.45 x 1.20 including rounding of edges, embedded in wall, complete all as specified and directed.

Supply and fixing 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Supply and fixing stop valves for 15 mm bore fancy type chromium plated long shank and cup concealed screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing push valves (urinal) for 15 mm bore fancy type chromium plated long shank and cup concealed screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing 15mm bore bib tap, chromium plated fancy type, screwed down, high pressure for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia, complete all as specified and directed.

Supply and fixing 25 mm bore of pipe Gunmetal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Supply and fixing 10 ltr low level PVC value less, syphonic action type flushing cistern, white, with ball value, float and handle including brackets, complete all as specified and directed.

Supply and fixing soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw, complete all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail, 20 mm dia, D Type, 60 cm long between flanges, complete all as specified and directed.

Supply and fixing for vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps, waste but including brackets, complete all as specified and directed.

Supply and fixing Vitreous China urinal half stall type white (excluding Flushing cistern, flush pipe and waste pipe) including connection to flushing pipe and outgoing pipe, complete all as specified and directed.

Supply and fixing 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe, complete all as specified and directed.

Supply and fix urinal spreader of PTMT any color for fixing with 15 mm dia pipe (Min weight 60 gms), complete all as specified and directed.

Supply and fixing PVC connection 15 mm size with CP nuts of length 450 mm long, complete all as specified and directed.

Supply and fixing 32 mm bore waster coupling of CP (half of full thread) for WHB/urinal, complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm dia, complete all as specified and directed.

Supply and fixing PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 75 mm dia bore pipe, complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110mm dia, complete all as specified and directed.

Supply and fixing PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110 mm dia bore pipe, complete all as specified and directed.

Supply and fixing 75mm dia PVC (SWR) bends any radius, complete all as specified and directed.

Supply and fixing 110mm dia PVC (SWR) bends any radius, complete all as specified and directed.

Supply and fixing PVC 110mm bore (SWR) branch piece, double (double Y) equal or unequal, complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

Material & Labour for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Supply and fixing for Rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) including wash out GI pipe 32mm of 450mm length with stopper, complete all as specified and directed.

Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore, complete all as specified and directed.

Supply and fixing for grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed.

Supply and fixing for vitreous China squatting pan, 'Orrissa' pattern, size 580xmmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and directed.

Supply and fixing for vitreous China wash down water closet pan (pedestal pattern), European type white, Seat and cover for pedestal pan and pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc (excluding fixing bolts, flushing cistern and flush pipe etc) complete all as specified and directed.

Supply and fixing Roof trusses (framed) trussed purlines, crane gantries, rails and fastenings and heavy brackets framing (beam, Tee, angle, channel or flat sections) of Fe-410-W (Gde-E-250) quality B including distance pieces, cleats etc complete all as specified and directed.

Supply and fixing pre painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and a directed by Engineer-in-Charge.

Material & Labour for Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm for Hard / Dense soil, complete all as specified and directed.

Material & Labour for Plain Cement Concrete type C2, 1:3:6 (40mm graded aggregate) as in foundation filling or in mass concrete, complete all as specified and directed.

Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fixing in position suspended false ceiling using GI exposed ceiling suspension system of grid size 600mm x 600mm with main runner 38x24mm (0.25mm thick) of central black line / black groove, Cross Tee 27mmx24mm(0.25mm thick) of central black line / black groove and Angle 22mm x 24mm (0.4mm thick) & including Supply and fixing 4mm thick (high pressure stream cured) pre-painted self-embossed, reinforced designer cement board (Ivory) with texture of size 595 x 595mm including conforming to IS 14862-2000 to be placed in a grid if gI system duly suspended with 4 mm dia galvanized iron /mild steel bar hanger fixed with steel dash fastener or iron purlins from the roof with adjustment clip. The main runner to be secured to structural soffit by hanger @ 1200mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1200mm cross tee to be interlocked between main runner @600mm C/C, so as to firm 600mm x 600mm grid etc., complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for laying water main pipe/ cables etc., getting out and forming bottom surface to required gradient, complete all as specified and as directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm all as specified and directed by Engineer-in-Charge.

Removal of excavated material exc 50 mtr & not exc 250 mtrs and deposited, where directed at a level n.exc 1.50 mtr above the starting point, complete all as specified and as directed.

Removing excavated materials not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Material & Labour for concrete bed to 150 mm bore dia of drain pipes including packing under, and haunching against the sides of the pipes after they are laid and tested, in PCC (1:4:8) type D2 using 40mm graded stone aggregate, complete all as specified and as directed.

Supply and fixing 150 mm dia reinforced cement concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and as directed.

Material & Labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed.

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor ISI marked PVC (FR-LSH) insulated unsheathed cable 1100 volts grade drawn through and including PVC non metallic rigid conduit & conduit accessories not less than 20mm dia concealed in Wall/ roof/ceiling with PVC sleeve/ dash fasteners/ wooden gutties and cadmium plated screws as per IS including sunk type MS anodised terminal boxes with 3 mm thick PVC laminated sheet concealed in wall etc including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for :- (a) One light point controlled by one, one way, SP, 5 Amps switch

(b) One fan point controlled by one, one way, SP, 5 Amps switch

(c) One socket outlet 5 pin, 5 Amps on the same board

(d) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per item No 103 here-in-above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Make of Wire :- Polycab/Havells/Plaza

All as per item No 103 here-in-above but using 4 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 4 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Make of Wire :- Polycab/Havells/Plaza

Supply and fixing switch piano type, flush button single pole, one way 5 Amps complete all as specified and directed.

Supply and fixing Switch piano, flush type single pole, one way 15 Amps all as specified and directed by Engr-in-Charge. Make:- HPL/Cona/SSK

Supply and fixing socket outlet 2 in 1, 3 Pin, 5 Amp, flush type, complete all as specified and directed.

Supply and fixing Socket outlet 2 in 1, 3 pin 5 Amp and 15 Amp flush type complete all as specified and directed by Engr-in-Charge. Make:- HPL/Cona/SSK

Supply and fixing ceiling rose, surface bakelite 65x 17.5 mm, three terminal, complete all as specified and directed.

Supply and fixing ceiling fan regulators, electronic type AC, 230 Volts, complete all as specified and directed. Make:- Anchor/leader/SSK

Supply and fixing sheet metal enclosure with socket plug top and MCBs single pole and neutral 240 V, 10 Amps enclosure with a two pin and earth plug, and socket complete with single pole MCB, complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB distribution board steel sheet, enclosures power coated fitted with bus bar, neutral link, earth bar din rail conforms IS-8822:96 and EIC 898-96, 240 volts double door complete all as specified and directed:- (a) TPN 04 way, 200 amps rated bus bar, 415 Volts.

(b) SPN 16 way, 200 amps rated bus bar, 240 Volts.

(c) SPN 4 way, 200 amps rated bus bar, 240 Volts.

Supply and fixing of MCB in DB's/ Isolator of the following rating complete all as specified and directed :- (a) MCB SP 6-32 Amps, curve 'C' breaking capacity 10 kA.

(b) MCB SPN 40 Amps, curve 'C' breaking capacity 10 kA.

(c) Isolator four pole, 63 Amps, 415 Volts.

Supply and fixing MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified. Make:- Legrand/L&T/Schneider

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed. Make:- Bajaj/Philips/Havells

Supply and fixing wall mounted fan complete with blades, 230V, 300mm sweep off white, pull cord control for speed and oscillation with high speed motor for higher air delivery and complete accessories all as specified and directed. Make:- Bajaj/Philips/Havells

Supply and fixing single phase heavy duty Exhaust Fan of 300 mm Sweep 1400 RPM with louver Cutting of existing wall for making hole for fixing of 300 mm sweep exhaust fan including PCC / brick work complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED tube light fitting (separate box fitting and LED rod) acrylic linear tube (1x 18 watt), 230V for single LED light fitting & rod (1 x 18W LED) bar professional CW 6500 K cover channel in box fitting, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make:- Bajaj /Havells/ Philips

Supply and fixing Batten lamp holder, PVC/polycarbonate type with back plate suitable for batten lamp holder, complete all as specified and directed.

Supply and fixing New Adore LED lamps 10W, 5 star, B22 COL BALL LAMP, complete all as specified and directed. Make:- Cat part No - LHLDERUEMD8X010 of HAVELLS or equivalent.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sqmm 4 core, complete all as specified and directed. Make:- Havells/Polycab/Finolex

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, complete all as specified and directed.

Material & Labour for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6.30 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 5 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work, PCC pit with RCC cover, charcoal salt funnel, GI wire up to 7.5 mtrs length complete all as specified and directed.

Material & Labour for providing dry river sand as in sand cushioning to UG cable including punning gently, complete all as specified and directed. Note :- Depth after punning shall be measured and paid.

Material & Labour for old size sub class 'B' burnt bricks straight or curved on plan laid as cable protection cover, complete all as specified and directed.

Supply and fixing GI pipe light grade 40 mm dia laid below road/fixed along wall, clamping etc complete all as specified and directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 40mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches/surfaces/walls complete all as specified and as directed. Make:- Tata/Jindal/Prakash Surya

Supply and fixing PPR Gate Valves (Brass Insert) of 25 mm bore, complete all as specified and as directed.

Material & Labour for cutting in position / existing GI pipe line 25 mm dia & insertion of new GI Tee of suitable size for making pipe connection, complete all as specified and directed.

Supply and Installation of LT CT operated Trivector Meter with the following specifications: • CT Operated Trivector Meter • Standard: IS 13779:1999 / CBIP 88 • Accuracy: Class 1.0 • Voltage and Current rating:- (i) Reference Voltage - 440 V (ii) Basic Current (Ib) - 5 A (iii) Maximum continuous current (Imax) - 10 A • Rated Frequency (variation) - 50Hz (±5%) • Power consumption:- (i) Voltage circuit: Less than 1.5 W and 10 VA per Phase at reference voltage, reference temperature and reference frequency (ii) Current circuit: Less than 1 VA per phase at basic current, reference frequency and reference temperature • Display type: 8 digit 7 segment backlit LCD display, not less than10 mm character height • Display in the event of Power Failure: Internal battery back-up for LCD display

contd from item No. 138 :- • Communication port:- (i) Galvanically isolated Optical Communication port for data transfer through either CMRI or remote device or both is provided (ii) RS 232 / RS 485 for communication protocol • Instantaneous parameters (30 Min) - Each Phase Current, Each Phase Voltage, Each Phase Power, Each Phase Power Factor, Each Phase Reactive Power, Power, Power Factor, Apparent Power, Reactive Power, Frequency • Load survey (30 Min) parameters - Energy, Apparent Energy • Daily Survey: Cumulative Energy, Cumulative Apparent Energy Make:- L&T, Secure, Schneider

Supply and Installation of Polycarbonate boxes for the LT CT Meter and Modem.

Supply and Fixing Low Tension, Ring Type Current Transformer, Rated Burden 10 VA, Accuracy class 1.0, Frequency 50 Hz. Voltage class 660 volts effectively earthed, 60/5 A to 800/5A (as directed by the engineer) complete all as specified.

Supply of CT wiring single core 2 sqmm 1100volts grade, PVC insulated, copper conductor, complete all as specified.

Supply and Installation of GPRS Modem: • GPRS communication capabilities • In-built protocol stack for meter read, store and forward to central server • Built-in SMPS power supply from 90 to 470V AC (single and three phase operation) • Automatic AT-interfacing and GPRS enabling • Remote modem configuration using GSM-SMS with configured master mobile number • Remote modem configuration using GPRS • Scheduled meter data read whenever required • Automatic meter data packet restoration if GPRS connection fails • Operating temperature -10 to +60 °C • Operating Humidity up to 95% RH (Non-condensing) • Including provision of Sim card Note:- GPRS Modem can be external or integrated with the meter itself Make:- Amitech, Wired-In, L&T

Supply and Installation of Three Phase Meter with the following specifications: • AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10-60A anti-tamper features, • Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy, cumulative apparent energy and frequency, • Meter should have internal or external GPRS Modem to provide connectivity with the billing software. Make:- L&T, Secure, Schneider

Supply and Installation of Polycarbonate boxes for the Three Phase Meter.

Web-based Data Acquisition, MDMS and billing Software Configuration with the following high level features: Cloud Based, Multi-user, Browser based system. On-line and Off-line meter data capture:- The software should support both the methods of data capture – online and offline data. It should support setting up the frequency of data collection. It should be be integrated with the meters / modems / DCU to get the data online. Instantaneous Data: – The software would support near real-time data at the frequency of 30 minutes. Meter Data / Customer Data Master - The system should support maintaining the meter master and customer master. It should be possible to add or replace meter. It should be possible to specify the meter registers in the software. Meter Data Processing - The software should support meter data processing such as billing data, validations / alerts etc. The software should support setting up the formula for calculations / data processing. Billing - The software should support billing set-up and bill generation for the bulk consumer clients in the system. The software should support user-interface to carry out these activities.

contd from item No. 146 :- Data Validation and Alerts - Software should support data validation and alerts (configurable) Energy Balance - The software should support carrying out energy balance across each substation based on on-line/manual data. It should support network calculation formula to carry out such an energy balance over different frequencies. Transformer KPI - Transformer Capacity Utilization, Transformer Load Balance Customer Portal - The software should support the access to the data by the customer and its employee. The customer should be able to view its own energy data and bill. Excel Export - The software should support data export to excel spreadsheets from all the data screens. E-mail / SMS Communications - The software should support email and sms communication from the system (SMS Charges Separate) Data Backup and Archival Role Based Access - Password protected and role based access for the users Note:- This would include two years GPRS Charges Make:- Innologix, L&T, AMITech

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 16,555.50 /- ]

NIHAL ENTERPRISES

M/S JAINENDRA KUMAR JAIN