Provision of common parking shed of galvalume sheet and associated work at certain locations in SMQs area at AF Stn Memaura

Amount

Surface excavation soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soil complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

Cement concrete in foundations, filling and mass concrete type E2 1:5:10 ( 40 mm graded aggregate)

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate 75 mm thick as in foundations filling, sub base and mass concrete filling, etc complete all as specified

M & L cement concrete in foundations,filling and mass concrete type C2 1:3:6 ( 40 mm graded aggregate )

M&L for sand filling under floors or in foundations including watering and consolidation

M&L for machine pressed precast interlocking paver block any shape and size conforming to IS- 15658-2006 of 60 mm thickness, M-35 Grade , with grey cement and no pigment complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old sise bricks built in CM 1:6 Complete all as specified

Rendering 15mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces

S & F steel work in tabular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 for vertical and raft/purlin drilled for fixing of steel sheeting or other covering etc. including cutting,welding,bending, complete all as specified and directed bt engr-in-charge.

M&L for preparation of new surfaces of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point

mayadeep buildcon

m/s pal associates

M/S PRATAP BUILDERS

M/S WALIA TRADESRS

M/S SURYA ASSOCIATES

PANKAJ AND BROTHERS