Providing additional Street Light on Farrukh Nagar Jatauli Road via Mahsana road at Farukh Nagar in District Gurugram.

Amount

Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm).

Blanking sheet . Suply and erection of blanking sheet in existing distribution board.

Miniature Circuit Breaker and Isolator. Suply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

Pipe Laying. Suply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 50 mm dia on surface.

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as equired .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

Pedestal . Suply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangemrnt with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level.

S/E of ISI mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. Below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material equired to complete the job in all respect upto the entire satisfaction of Engineer-In- Charge of the work HDPE pipe 63/50 mm outer dia/ inner dia.

Suply and erection of moulded case circuit breaker single pole/ 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job the job in all respect up to the entire satisfaction of the Engineer -in - Charge of the work. 4 pole MCCB 6 to 63 amp.

HIGH MAST POLE Suply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top Section = 3 mm (Minimum). Bottom Section = 3 mm (Minimum Top Dia = 150 mm Bottom Dia = 360mmThickness of Galvanization Top = 65 micron (Min.) Bottom = 85 micron (Min.)

Supply & erection of ornamental cast iron MS pole with double arm bracket, of total height 9 M nominal above the foundation top level with arm length 1250 mm, with S.G. iron base fabricated with cst iron embellishment, joints, colomn sections etc, shaft shall be made o MS pipe. Height of pole is inclusive with height of brackets as shown in drawing. The pole should be painted with polyurethane paint of approved colour finish, MCB, Bakelite sheet and connecter is included with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in- Charge of the work. Bajaj Make : SULTAN ECO 9 MTR DA MS pole with sultan braket As per drawing. : EPC-19-9M-SULTAN-DA-001/ or equivelent model of Keselec/ Philips/ Crompton

Supply & erection of suspension type decorative street light fittings, made of spun aluminium housing, Diffuser clear injection Moulded PC with IP 65 protection for optical compartment and IP 44 or higher for control gear with 120 W asymmetrical LED system having CCT 5700K, with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in- Charge of the work. Make & model :BAJAJ BORAGE TM Color of fixture : Graphite Grey Powder/ or equivelent model of Keselec/ Philips/ Crompton

Supply and erection of Double door sheet steel superline/ Powerline Vertical distribution boards suitable for TP/ FP veritcal MCCBs upto 125 amp as incomer (but without cost of MCCB) complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (load line) 4 way load line

Supply and erection of 32 amp. 3 pole/ 230 volt - digital time switch including cost of contactor, MCB for controlling the street light with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work. Make Indoasian or equivalent model of Havells/ standard C45:C46

Supply and erection of RCC 1:1.5:3 for making Foundation of size: .7m x .7m x 1.8m, with minimum 8 nos. 12mm dia, longitudinal MS reinforcement Rods, with rings of 8 mm dia at distance of not more than 200 mm for fixing pole alongiwth Foundation Bolt M24*750 En grade along with template with all labour and Material required to complete the job in all respect upto entire satisfaction of Engineer- in- charge of the work.

Supply and erection of 150 watt LED flood light fitting including erection of same on pole/ parapet with necessary nuts & bolts and making necessary connection of same complete in all respect.

Supply and erection of RCC 1:1.5:3 for making Foundation for 20 mtr. high mast of size: 1m x 1m x 2.5m, with minimum 8 nos. 16mm dia, longitudinal MS reinforcement Rods with rings of 8 mm dia at distance of not more than 200 mm for fixing pole alongwith 1:8:16 brick ballast bed of height 15cm. with all labour and Material required to complete the job in all respect upto entire satisfaction of Engineer- in- charge of the work.

DHEERAJ ENTERPRISES

KKM Engineering Solutions Pvt. Ltd.