ADB-KOL(II)-05 A) Proposed Upgradation and Maintenance of Road from SH-153 Shirol to Kutwad- Kanwad Road B) Proposed Upgradation and Maintenance of Road from MDR 23 Aurwad, Bubnal to Aalas Road Taluka - Shirol, District - Kolhapur

Amount

Proposed Upgradation & Maintenance of Road from SH-153 Shirol to Kutwad- Kanwad Road Km 0/000 to Km 5/900 in Taluka : Shirol, District : Kolhapur

Site Clearance, Dismantling and Earth Works

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 milimeter, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to all lifts and all leads including removal and disposal of top organic soil not exceeding 150 millimeter in thickness as per MORD Technical Specification Clause 201 and as directed by Engineer in charge. A) Non thorny jungle.--- By Mechanical Means

Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per MORD Technical Specification Clause 201.and as directed by Engineer in charge.

Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead as per Technical Specification Clause 202. Dismantling Stone Masonry as per Technical Specification Clause 202. (B) Rubble Stone Masonry in Cement Mortar

Construction of Embankment with Material Obtained from Roadway Cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification Clause 301.5 and as directed by Engineer in charge.

Construction of embankment with approved material obtained from borrow pits with transporting to site with all leads & lifts,Spreading grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification Clause 301.5 A and as directed by Engineer in charge.

Excavation for roadway in soil with hydraulic excavator of 0.9 cubic meter bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross section, and transporting to the embankment location with all leads & lifts as per MORD Technical Specification Clause 32.3 (iii) Excavation in soil using Hydraulic Excavator and Tippers with disposal upto all leads and as directed by Engineer in charge.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MORD Technical Specification Clause 303.1. and as directed by Engineer in charge.

Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work

Construction of granular sub-base Grade-II by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in-place method with rotavator at Optimum Moisture Content, and compacting with Vibratory roller to achieve the desired density, complete as per MORD Technical Specification Clause 401and as directed by Engineer in charge. . Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method --Grading II,CBR not less than 30%

Water Bound Macadam with Crushable Screenings - WBM Grading 2- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (B) By Mechanical Means (Grading II with Crushable Screenings)

Water Bound Macadam with Stone Screenings - WBM Grading 2- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (B) By Mechanical Means (Grading II with Stone Screenings)

Modified Penetration Macadam - Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 505. A) 50 mm thick Bitumen (S-65) 60/70- VG-30

Providing and applying Tack Coat with Bitumen emulsion (Rapid Setting -1) using emulsion distributor at the rate of 0.20 to 0.25 kilogram per square meter on the prepared bituminous surface cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 and as directed by Engineer in charge. Bitumen Emulsion (Rapid Setting-1) @ 0.225 kg per sqm

Providing, laying and rolling of open-graded premix carpet of 20 milimeter thick as composed of 13.2 milimeter to 5.6 milimeter aggregates using Viscocity Grade -30 grade bitumen at at the rate of 1.46 kilogram/ square meter and laying to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant & transportation with all leads & lifts , laying and rolling with a three wheel 80-100 kiloNewton static roller capacity, finished to required level and grades as per MORD Technical Specification Clause 508.and as directed by Engineer in charge. Bitumen (S-65) 60/70- Viscocity Grade-30 (Bitumen content @ 1.46 kilogram per square meter)

Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A (VG 30 Bitumen at rate of 0.98kg/sqm) as per MORD Technical Specification Clause 510 and as directed by Engineer in charge. Bitumen (S-65) 60/70- Viscocity Grade-30 (Bitumen content @ 0.98 kilogram per square meter)

Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works

Earthwork in excavation for structures as per drawing and MORD technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads & lifts dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by Engineer in charge. i) Ordinary Soil

Removing all types of Hume pipes and stacking with all leads & lifts including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. Upto 600mm

Providing and laying dry rubble soling complete as per drawings and Technical specifications Clause 1303

Providing concrete for plain concrete in open foundations complete as per drawings and as per MORD technical specifications Clause 802, 803, 1202 & 1203 Plain Cement Concrete grade Mix 10 Including all leads & lifts and as directed by Engineer in charge.

Plain/reinforced cement concrete in substructure complete as per drawings and as per MORD technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 Including all leads & lifts and as directed by Engineer in charge Plain Cement Concrete grade M 15

Providing and laying reinforced cement concrete pipe Non Pressured 3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per MORD technical specification Clause 1106 and as directed by Engineer in charge. 1000 Milimeter Non Pressure-3 Pipe

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kilogram laid dry complete as per drawing and as per MORD technical specifications Clause 1301 and as directed by Engineer in charge.

Construction of toe walls for protection of slopes as per drawing and technical specifactions Clause 1302.5

Providing and laying reinforced cement concrete pipe Non Pressured-2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as MORD technical specifactions Clause 1106 and as directed by Engineer in charge. 600 Milimeter Non Pressure-2 Pipe

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per MORD Clause 1106 and as directed by Engineer in charge. NP-3 600mm Dia Pipe

Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick Mild steel Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing & as per MORD Clause 1701.2.2 and as directed by Engineer in charge. 900 Milimeter Equilateral Triangle

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing as per MORD tecnical specification Clause 1701.2.2 and as directed by Engineer in charge. 600 Milimeter circular

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing as per MORD tecnical specification Clause 1701.2.2 and as directed by Engineer in charge. 800 x 600 MM Rectangular

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing & MORD Clause 1701.2.2 and as directed by Engineer in charge. 900 mm sides octagon

Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 milimeter thick Mild Steel. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 milimeter width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 milimeter x 47milimeter of 12 SWG Square tube of 3050 milimeter height duly strengthened by 25 milimeter x 5 milimeter Mild Steel flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with Mix-15 grade cement concrete 450 milimeter x 450 milimeter x 600 milimeter, 600 milimeter below ground level as per approved drawing and MORD Technical Specification Clause 1701 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade Fifth Kilometer stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD Technical Specification Clause 1703 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade Kilometer stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD Technical Specification Clause 1703 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade 200 Meter. stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD Technical Specification Clause 1703 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification Clause 1704 and as directed by Engineer in charge.

Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three Mild Steel Plates of 1.6 milimeter thick, top and middle plate duly welded with Mild Steel flat iron 25milimeter x 5milimeter size on back on edges. The lower plate will be welded with Mild Steel angle iron frame of 25milimeter x 25milimeter x 5milimeter. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 number. 75milimeter x 75 milimeter of 12 SWG sheet tubes posts duly embedded in cement concrete Mix-15 grade blocks of 450milimeter x 450milimeter x 600milimeter, 600milimeter below ground level. The top most diamond plate will be welded to middle plate by 47milimeter x 47milimeter of 12 SWG steel plate tube. All Mild Steel will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing & MORD Clause 1701 and Annexure 1700.1and as directed by Engineer in charge.

Providing and fixing a typical MMGSY Citizen information board as per specification provided on detailed drawing of NRRDA having frame size of 2500 x 1150 mm with 75 mm square or round steel tube for support fixed in a concrete block of 60 x 60 x 75 centimeter size. Information as provided in drawing of NRRDA shall be displayed on a CR/GI sheet of appropriate thickness and fixed at steel frame with 5 mm steel plate. All lettering and painting arrows border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and coloured as mentioned in detailed drawing. All sections of framed posts and steel tube shall be painted with primer and two coat of epoxy paint as per drawings and as directed by Engineer in charge.

Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810) Spec : MORTH-810

Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and as per MORTH technical Specification clause 806 & as directed by Engineer in charge

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complet and as per MORTH technical Specification clause 803.4 & as directed by Engineer in charge

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Providing concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

White washing two coats on parapet walls and tree trunks including preparations of surface by cleaning scraping etc. as per MORD technical specifications Clause 1915 & as directed by Engineer in charge

Providing and applying two coats of oil paint including priming coat on concrete/masonary/asbestos Cement plastered surfaces, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scafolding if necessary, clenaing and preparing the surface etc. Complete as directed by Engineer in charge

Proposed Upgradation & Maintenance of Road from MDR 23 Aurwad, Bubnal to Aalas Road (VR-280) Km 0/000 to Km 6/000 in Taluka : Shirol, District : Kolhapur

Site Clearance, Dismantling and Earth Works

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 milimeter, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to all lifts and all leads including removal and disposal of top organic soil not exceeding 150 millimeter in thickness as per MORD Technical Specification Clause 201 and as directed by Engineer in charge. A) Non thorny jungle.--- By Mechanical Means

Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per MORD Technical Specification Clause 201.and as directed by Engineer in charge.

Scarifying the existing bituminous road surface and disposal of scarified material with all lead & lift as per MORD Technical Specification Clause 301.4.and as directed by Engineer in charge.

Construction of Embankment with Material Obtained from Roadway Cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification Clause 301.5 and as directed by Engineer in charge.

Construction of embankment with approved material obtained from borrow pits with transporting to site with all leads & lifts,Spreading grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification Clause 301.5 A and as directed by Engineer in charge.

Excavation for roadway in soil with hydraulic excavator of 0.9 cubic meter bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross section, and transporting to the embankment location with all leads & lifts as per MORD Technical Specification Clause 32.3 (iii) Excavation in soil using Hydraulic Excavator and Tippers with disposal upto all leads and as directed by Engineer in charge.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MORD Technical Specification Clause 303.1. and as directed by Engineer in charge.

Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work

Construction of granular sub-base Grade-II by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in-place method with rotavator at Optimum Moisture Content, and compacting with Vibratory roller to achieve the desired density, complete as per MORD Technical Specification Clause 401and as directed by Engineer in charge. . Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method --Grading II,CBR not less than 30%

Water Bound Macadam with Stone Screenings - WBM Grading 2- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (B) By Mechanical Means (Grading II with Stone Screenings)

Water Bound Macadam with Crushable Screenings - WBM Grading 2- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (B) By Mechanical Means (Grading II with Crushable Screenings)

Modified Penetration Macadam - Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 505. A) 50 mm thick Bitumen (S-65) 60/70- VG-30

Providing and applying Tack Coat with Bitumen emulsion (Rapid Setting -1) using emulsion distributor at the rate of 0.20 to 0.25 kilogram per square meter on the prepared bituminous surface cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 and as directed by Engineer in charge. Bitumen Emulsion (Rapid Setting-1) @ 0.225 kg per sqm

Providing, laying and rolling of open-graded premix carpet of 20 milimeter thick as composed of 13.2 milimeter to 5.6 milimeter aggregates using Viscocity Grade -30 grade bitumen at at the rate of 1.46 kilogram/ square meter and laying to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant & transportation with all leads & lifts , laying and rolling with a three wheel 80-100 kiloNewton static roller capacity, finished to required level and grades as per MORD Technical Specification Clause 508.and as directed by Engineer in charge. Bitumen (S-65) 60/70- Viscocity Grade-30 (Bitumen content @ 1.46 kilogram per square meter)

Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A (VG 30 Bitumen at rate of 0.98kg/sqm) as per MORD Technical Specification Clause 510 and as directed by Engineer in charge. Bitumen (S-65) 60/70- Viscocity Grade-30 (Bitumen content @ 0.98 kilogram per square meter)

Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works

Earthwork in excavation for structures as per drawing and MORD technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads & lifts dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by Engineer in charge. i) Ordinary Soil

Removing all types of Hume pipes and stacking with all leads & lifts including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. Upto 600mm

Providing and laying dry rubble soling complete as per drawings and as per MORD Technical specifications Clause 1303 Including all leads & lifts and as directed by Enginner In charge

Providing concrete for plain concrete in open foundations complete as per drawings and as per MORD technical specifications Clause 802, 803, 1202 & 1203 Plain Cement Concrete grade Mix 10 Including all leads & lifts and as directed by Engineer in charge.

Plain/reinforced cement concrete in substructure complete as per drawings and as per MORD technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 Including all leads & lifts and as directed by Engineer in charge Plain Cement Concrete grade M 15

Providing and laying reinforced cement concrete pipe Non Pressured 3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per MORD technical specification Clause 1106 and as directed by Engineer in charge. 1000 Milimeter Non Pressure-3 Pipe

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kilogram laid dry complete as per drawing and as per MORD technical specifications Clause 1301 and as directed by Engineer in charge.

Construction of toe walls for protection of slopes as per drawing and technical specifactions Clause 1302.5

Providing and laying reinforced cement concrete pipe Non Pressured-2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as MORD technical specifactions Clause 1106 and as directed by Engineer in charge. 600 Milimeter Non Pressure-2 Pipe

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per MORD Clause 1106 and as directed by Engineer in charge. NP-3 600mm Dia Pipe

Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick Mild steel Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing & as per MORD Clause 1701.2.2 and as directed by Engineer in charge. 900 Milimeter Equilateral Triangle

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing as per MORD tecnical specification Clause 1701.2.2 and as directed by Engineer in charge. 600 Milimeter circular

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing as per MORD tecnical specification Clause 1701.2.2 and as directed by Engineer in charge. 800 x 600 MM Rectangular

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 milimeter thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 milimeter width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47milimeter x 47 milimeter x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with Mix-15 grade cement concrete 450x450x600 milimeter, 600 milimeter below ground level as per approved drawing & MORD Clause 1701.2.2 and as directed by Engineer in charge. 900 mm sides octagon

Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 milimeter thick Mild Steel. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 milimeter width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 milimeter x 47milimeter of 12 SWG Square tube of 3050 milimeter height duly strengthened by 25 milimeter x 5 milimeter Mild Steel flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with Mix-15 grade cement concrete 450 milimeter x 450 milimeter x 600 milimeter, 600 milimeter below ground level as per approved drawing and MORD Technical Specification Clause 1701 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade Fifth Kilometer stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD Technical Specification Clause 1703 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade Kilometer stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD Technical Specification Clause 1703 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade 200 Meter. stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD Technical Specification Clause 1703 and as directed by Engineer in charge.

Reinforced cement concrete Mix 15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification Clause 1704 and as directed by Engineer in charge.

Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three Mild Steel Plates of 1.6 milimeter thick, top and middle plate duly welded with Mild Steel flat iron 25milimeter x 5milimeter size on back on edges. The lower plate will be welded with Mild Steel angle iron frame of 25milimeter x 25milimeter x 5milimeter. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 number. 75milimeter x 75 milimeter of 12 SWG sheet tubes posts duly embedded in cement concrete Mix-15 grade blocks of 450milimeter x 450milimeter x 600milimeter, 600milimeter below ground level. The top most diamond plate will be welded to middle plate by 47milimeter x 47milimeter of 12 SWG steel plate tube. All Mild Steel will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing & MORD Clause 1701 and Annexure 1700.1and as directed by Engineer in charge.

Providing and fixing a typical MMGSY Citizen information board as per specification provided on detailed drawing of NRRDA having frame size of 2500 x 1150 mm with 75 mm square or round steel tube for support fixed in a concrete block of 60 x 60 x 75 centimeter size. Information as provided in drawing of NRRDA shall be displayed on a CR/GI sheet of appropriate thickness and fixed at steel frame with 5 mm steel plate. All lettering and painting arrows border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and coloured as mentioned in detailed drawing. All sections of framed posts and steel tube shall be painted with primer and two coat of epoxy paint as per drawings and as directed by Engineer in charge.

Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810) Spec : MORTH-810

Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and as per MORTH technical Specification clause 806 & as directed by Engineer in charge

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complet and as per MORTH technical Specification clause 803.4 & as directed by Engineer in charge

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Providing concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

White washing two coats on parapet walls and tree trunks including preparations of surface by cleaning scraping etc. as per MORD technical specifications Clause 1915 & as directed by Engineer in charge

Providing and applying two coats of oil paint including priming coat on concrete/masonary/asbestos Cement plastered surfaces, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scafolding if necessary, clenaing and preparing the surface etc. Complete as directed by Engineer in charge